Take a look into the attached patch for clues on how to get GDB to support
multiple baud rates.
I hope you'll find it useful.
Jason
----------------------
Index: targetselection.itb
===================================================================
RCS file: /cvs/cvsfiles/devo/gdb/gdbtk/library/targetselection.itb,v
retrieving revision 1.1
diff -p -r1.1 targetselection.itb
*** targetselection.itb 2000/02/04 13:52:34 1.1
--- targetselection.itb 2000/04/20 20:57:16
*************** body TargetSelection::init_target_db {}
*** 123,129 ****
# ARM Remote
set gdb_target(rdp,pretty-name) "ARM Remote/Serial"
set gdb_target(rdp,defbaud) "9600"
! set gdb_target(rdp,baud-rates) {9600}
set gdb_target(rdp,cmd) "rdp com1"
set gdb_target(rdp,runlist) {1 1 0 1}
set gdb_target(rdp,after_attaching) {}
--- 123,129 ----
# ARM Remote
set gdb_target(rdp,pretty-name) "ARM Remote/Serial"
set gdb_target(rdp,defbaud) "9600"
! set gdb_target(rdp,baud-rates) {9600 19200 38400 57600}
set gdb_target(rdp,cmd) "rdp com1"
set gdb_target(rdp,runlist) {1 1 0 1}
set gdb_target(rdp,after_attaching) {}
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
