On Sat, 12 Aug 2000 01:37:59 -0500 (CDT), Vasant Ramasubramanian wrote:
> On Fri, 11 Aug 2000, Erik Mouw wrote:
>> The SA1110 Flash burner doesn't work on SA1100 boards because the
>> JTAG ID code is different. Have a look at the LART site: since this
>> afternoon we have a page with hard- and software to burn the LART
>> flash (LART is an SA1100 board):
>>
>
> We actually *do* have an SA-1110 platform, not an SA-1100. I am aware of
> the LART being SA1100, my question was actually more directed towards if
Bzzt, you're right, sorry.
> the Assabet JTAG burner requires any specific parts other than a standard
> JTAG port(i.e. the programmer tries to shift data through the CPLD or
> something...). Or is the jflash on Nico's site an SA1100 burner?
I don't know about CPLDs on the Assabet (I don't have one) , but there
might be another difference: the Assabet has two 16 bit flash chips in
parallel on its bus. If your system has only one 16 bit flash on the bus,
the Assabet JTAG programmer will be quite confused.
Erik
--
Yes, it works sometimes. If you need something that "works sometimes"
use Windows! -- Victor Khimenko on linux-kernel
unsubscribe: body of `unsubscribe linux-arm' to [EMAIL PROTECTED]
++ Please use [EMAIL PROTECTED] for ++
++ kernel-related discussions. ++
