On Tuesday 21 December 2004 08:29, Richard Cooper wrote:
> I just found this in the archive. No one else answered it, so I guess I
> will. It's quite the pain to figure out really. I remember spending
> hours if not days trying to learn enough C that I could figure it out from
> the kernel source. I really hate C.
>
> > How can I read a key from the keyboard when the key is available?
>
> You have to call TCSETSW, which sadly is like the most undocumented IOCTL
> ever...
>
> This code is copy & pasted out of my program Softer. The assembly syntax
> is different, but I'm sure you can figure it out. It also makes the I/O
> completely raw, meaning you'll receive 127 instead of 8 for backspace, and
> you'll receive 13 instead of 10 for enter. This is more than you want if
> you're just looking to read the characters as they are typed, but I don't
> remember how I ever figured out the correct values to get it to do what I
> wanted. However, if you also want scancodes, then this is exactly what
> you want.
>
> First you need to save the current settings which are creating the line
> buffering and other nonsense so that you can put them back when your
> program is done.
>
> sys sys_ioctl, 0, TCGETS, old_termios
>
> This requires a little structure to save into...
>
> old_termios
> .c_iflag resd 1
> .c_oflag resd 1
> .c_cflag resd 1
> .c_lflag resd 1
> .c_cc resb 19
>
> Then you call another function to set the new mode...
>
> sys sys_ioctl, 0, TCSETSW, new_termios
>
> And of course this requires another structure...
>
> new_termios
> .c_iflag dd 0
> .c_oflag dd ONLCR | OPOST
> .c_cflag dd B38400 | CS8 | CREAD | HUPCL
> .c_lflag dd 0
> .c_cc db $0, $3, $1c, $7f, $15, $4, $0, $1
> db $0, $11, $13, $1a, $0, $12, $f, $17
> db $16, $0, $0
Ok. What are the meaning of this constants?
I suppose that with this type of ioctl function, I can have more
control over the keyboard.. Where I can find the documentation of
this constants?
>
> And finally when your program is finished you need to put things back like
> they were...
>
> sys sys_ioctl, 0, TCSETSW, old_termios
>
> And those nice constants are:
>
> sys_ioctl = 54
> TCGETS = 0x5401
> TCSETSW = 0x5403
> ONLCR | OPOST = 5
> B38400 | CS8 | CREAD | HUPCL = 0x4BF
Yes, very nice! Why have you choosen B38400 | CS8 | CREAD | HUPCL ?
In an aonther example I found this: ICANON | ECHO | ISIG
Thanks,
HIToC
--
With regards,
HIToC
[EMAIL PROTECTED]
-
To unsubscribe from this list: send the line "unsubscribe linux-assembly" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at http://vger.kernel.org/majordomo-info.html
