On Sun, 2007-08-19 at 22:40 +0200, Florian Schmidt wrote: > > Just by quick googling I found for example following: > > http://blackfin.uclinux.org > > http://docs.blackfin.uclinux.org/doku.php?id=ad1836a > > > > So there might be plenty of hardware and even supporting software > > available which could be suitable for this kind of use... > > Maybe i miss something but it looks this board is for a certain type of DSP > boards [which seem to run ucLinux]. This stuff looks rather costly.. But > maybe i miss something obvious. I'm totally new to this embedded stuff :)
Well, costly is often how life is for people who aren't building their own boards or buying dozens to thousands at a time. In fact, I'm curious how much it would cost to actually buy one of those ARM9 boards you mention. They priced from $65 each, but do you have to buy 100 to get that price? I see someone mentioned Efika. As far as I know, there are two potential problems with that board, both are surmountable. First, is basically a PPC 604, not a G4. So, no SIMD. I get the impression that a lot of linux audio software isn't really written to use SSE or Altivec anyway, so this may not be much of a loss. Second, Efika has no on board video and only one PCI slot. Some possible solutions would be to use a serial or USB control panel, and modify any plugins to be controllable via your control panel system. Also, I don't know if any USB->VGA dongles would happen to be supported by linux. Certainly there are several off the shelf character LCD control panels that could be used, and they typically have several GPIO pins that could potentially be attached to a rotary encoder. Alternatively, AVRs that can go between a few rotary encoders and a serial port are pretty cheap, so maybe you could use a Crystal Fontz USB panel in addition to using the serial port for an AVR to rotary encoder system. I also see that elsewhere in the thread someone mentioned using EPIA 10000s, or EPIA 5000s, both MiniITX motherboards, for about $300 or $120 respectively. The upside of either is they have onboard video in addition to a PCI slot, if you want an easy to setup graphics display. Another option that is perhaps a bit more affordable and powerful than any mentioned so far is PCChips makes a board called the V21G. http://www.pcchips.com.tw/PCCWeb/Products/ProductsDetail.aspx?DetailID=384 This is a Flex-ATX board instead of a Mini-ITX board. It is based on the Via C7 instead of the older/slower C3. It has two PCI slots and onboard video. And it is definately less than $75 in the US (Google will show you lots of online retailers). The possible downside to this, is that PCChips is better known in the US as the Elitegroup Computer Systems (ECS). ECS isn't exactly the best quality, but they don't seem to be the worst either. Buy from a place that will give you a refund if you are unhappy, and you are probably OK. _______________________________________________ Linux-audio-dev mailing list [email protected] http://lists.linuxaudio.org/mailman/listinfo.cgi/linux-audio-dev
