On Tue, 2010-12-14 at 09:34 -0500, David Santamauro wrote: > On Tue, 14 Dec 2010 13:40:43 +0100 > Ralf Mardorf <[email protected]> wrote: > > > On Tue, 2010-12-14 at 13:36 +0100, Ralf Mardorf wrote: > > > On Tue, 2010-12-14 at 06:47 -0500, David Santamauro wrote: > > > > Hi Niels, > > > > > > > > > > > > On Mon, 13 Sep 2010 17:36:11 -0700 > > > > Niels Mayer <[email protected]> wrote: > > > > > > > > > On Mon, Sep 13, 2010 at 2:25 PM, Ralf Mardorf > > > > > <[email protected]> wrote: > > > > > >Pardon, I didn't follow the progress of envy24control. Did you > > > > > >finish > > > > > > the recently development and if so, where can we/I get the > > > > > > latest source code? > > > > > > > > > > http:// mudita24.googlecode.com > > > > > > > > > > Status: still at 1.03. Waiting for Tim E. Real to commit and > > > > > then will release 1.04. Or use Tim's current patches (see link > > > > > above). > > > > > > > > > > Niels > > > > > http://nielsmayer.com > > > > > > > > > > > > ...quick question on the "Monitor PCMs" tab: Why are there 2 > > > > sliders per PCM out? Shouldn't L/R Gang join channels 1 & 2, 3 & > > > > 4 etc... > > > > > > > > thanks for any insight... > > > > > > > > David > > > > > > I never use the monitor section. Could it be that it's to root the > > > PCMs to the left or the right for the stereo sum, comparable to a > > > mixing console's left/right buttons for the subgroups? Hence L/R > > > Gang will make one PCM monitor mono for the stereo sum. > > > > PS: > > > > Note, there are no pan pots and you not necessarily will have PCM > > monitor 1 to the left and 2 to the right, perhaps 1 should be mono > > and 2 2 to the left, while 3 is to the right position. > > > > Just a shot in the dark. > > > > I think I understand: by looking at the windows mixer app in the delta > 1010 documentation, I see that there is one fader, but in addition, > there is a pan slider per channel. I'm going to venture to guess that > having both sliders in envy24control full up, it is the equivalent of > the windows mixer app channel up and pan center -- this seems logical. > > * single strips and pan pots/sliders would make this clearer. > > David
Of course, but we should keep in mind, that we're talking about the mixer for sound cards, but a mixing console or even a virtual mixing console emulating a dj mixer or a professional mixing console. I never used the monitor tab of the mixer for the sound card. I just use envy24control and mudita24 to optimise the 'main' IOs of the card to my analog mixing console, any mixing is done by apps and/or the analog mixer, including monitoring. Cheers! Ralf _______________________________________________ Linux-audio-dev mailing list [email protected] http://lists.linuxaudio.org/listinfo/linux-audio-dev
