On Fri, 2010-12-31 at 12:49 +0100, Julien Claassen wrote: > But one questin arose while listening: Did you use any effects on this? I > sometimes had the feeling, that there was something warbling slightly, like > you had use a phaser or tremolo or something in a very subtel way.
The lame encoder adds a noticeable warbling at 128Kbit, there is less on the original, but still: The attack part of the sound is composed of two short samples of a Yamaha grand of slightly different velocities, but here just spread out for a wide and clear soundfield. Velocity nuances are instead handled by filtering. The short piano samples by themselves have a very audible loop, as in: "Ding, Zing, zing, z...", so after half a second (or so), I blend in a mild pwm with a saw, filtered to match the overall sound. as well as to give a slight vocal, singing character. Real pianos do not have this kind of extended sustain. The pwm/saw is finally routed through a three way chorus which makes them sound a bit as if it were the neighbouring strings that were resonating and reverberating. Or, that is at least what was intended. The modulation wheel is wired to vibrato (on pwm/saw ) as well as send to delay line for a longer, even more "singing" sustain. This is not in use here though. The second modulation wheel is wired to turn filtering far down, plate reverberation off as well as release rate to none for a very dry, round "fusion-like" micromoog sound. > Was this > only one piano, or did you perhaps use two sounds layered? I'm intrigued, > because as an effect it was quite need: Noticeable but not beat me in the > face. :-) It will "beat you in the face" if you collapse the two channels into mono - so don't do that! /J > Warmly yours > Julien _______________________________________________ Linux-audio-dev mailing list [email protected] http://lists.linuxaudio.org/listinfo/linux-audio-dev
