Hannes, On 4/24/17 15:24, Hannes Reinecke wrote: > On 04/21/2017 05:55 AM, [email protected] wrote: >> From: Damien Le Moal <[email protected]> >> >> This series introduces zoned block device support to the device mapper >> infrastructure. Pathces are as follows: >> >> - Patch 1: Add a new target type feature flag to indicate if a target type >> supports host-managed zoned block devices. This prevents using these drives >> with the current target types since none of them have the proper support >> implemented and will not operate properly with these drives. >> - Patch 2: If a target device is a zoned block device, check that the range >> of >> LBAs mapped is aligned to the device zone size and that the device start >> offset also aligns to zone boundaries. This is necessary for zone reset and >> zone report correct execution. >> - Patch 3: Check that the different target devices of a table have compatible >> zone sizes and models. This is necessary for target types that expose a >> zone >> model different from the underlying device. >> - Patch 4: Fix handling of REQ_OP_ZONE_RESET bios >> - Patch 5: Fix handling of REQ_OP_ZONE_REPORT bios >> - Patch 6: Introduce a new helper function to reverse map a device zone >> report >> to the target LBA range >> - Patch 7: Add support for host-managed zoned block devices to dm-flakey. >> This >> is necessary for testing file systems supporting natively these drives >> (e.g. >> f2fs). >> - Patch 8: Add support for for zoned block devices to dm-linear. This can >> have >> useful applications during development and testing (e.g. allow creating >> smaller zoned devices with different combinations and positions of zones). >> There are also interesting applications for production, for instance, the >> ability to aggregate conventional zones of different drives to create a >> regular disk. >> - Patch 9: Add sequential write enforcement to dm_kcopyd_copy so that >> sequential zones of a host-managed zoned block device can be specified as >> destinations. >> - Patch 10: New dm-zoned target type (this was already sent for review >> twice). >> This resend adds modifications suggested by Hannes to implement reclaim >> using dm-kcopyd. dm-zoned depends on patch 9. >> >> As always, comments and reviews are welcome. >> >> Damien Le Moal (10): >> dm-table: Introduce DM_TARGET_ZONED_HM feature >> dm-table: Check device area zone alignment >> dm-table: Check block devices zone model compatibility >> dm: Fix REQ_OP_ZONE_RESET bio handling >> dm: Fix REQ_OP_ZONE_REPORT bio handling >> dm: Introduce dm_remap_zone_report() >> dm-flakey: Add support for zoned block devices >> dm-linear: Add support for zoned block devices >> dm-kcopyd: Add sequential write feature >> dm-zoned: Drive-managed zoned block device target >> >> Documentation/device-mapper/dm-zoned.txt | 154 +++ >> drivers/md/Kconfig | 19 + >> drivers/md/Makefile | 2 + >> drivers/md/dm-flakey.c | 21 +- >> drivers/md/dm-kcopyd.c | 68 +- >> drivers/md/dm-linear.c | 14 +- >> drivers/md/dm-table.c | 145 ++ >> drivers/md/dm-zoned-io.c | 998 ++++++++++++++ >> drivers/md/dm-zoned-metadata.c | 2195 >> ++++++++++++++++++++++++++++++ >> drivers/md/dm-zoned-reclaim.c | 535 ++++++++ >> drivers/md/dm-zoned.h | 528 +++++++ >> drivers/md/dm.c | 93 +- >> include/linux/device-mapper.h | 16 + >> include/linux/dm-kcopyd.h | 1 + >> 14 files changed, 4783 insertions(+), 6 deletions(-) >> create mode 100644 Documentation/device-mapper/dm-zoned.txt >> create mode 100644 drivers/md/dm-zoned-io.c >> create mode 100644 drivers/md/dm-zoned-metadata.c >> create mode 100644 drivers/md/dm-zoned-reclaim.c >> create mode 100644 drivers/md/dm-zoned.h >> > Very nice. > > You can add my > > Reviewed-by: Hannes Reinecke <[email protected]> > > to the whole series.
Thank you for the review. Best regards. -- Damien Le Moal, Ph.D. Sr. Manager, System Software Research Group, Western Digital Corporation [email protected] (+81) 0466-98-3593 (ext. 513593) 1 kirihara-cho, Fujisawa, Kanagawa, 252-0888 Japan www.wdc.com, www.hgst.com
