On Tue, 2017-08-29 at 19:16 +0800, Ming Lei wrote:
> Hi Bart,
> 
> Did you see perf regression on SRP with smaller jobs after applying
> my patchset V3?
> 
> I just run the test with 16 jobs(the system has 16 CPU cores) instead of 64,
> looks not see perf regression on SRP about v4.13-rc6+blk-next(2nd column) VS.
> v4.13-rc6+blk-next+patch V3(3rd column):
> 
> 
> ---------------------------------------
>  IOPS(K)  |    NONE     |    NONE
> ---------------------------------------
> read      |      475.83 |      485.88
> ---------------------------------------
> randread  |      142.86 |      141.96
> ---------------------------------------
> write     |       483.9 |      492.39
> ---------------------------------------
> randwrite |      124.83 |      124.53
> ---------------------------------------
> [ ... ]
> ---------------------------------------
>  LAT(us)  |    NONE     |    NONE
> ---------------------------------------
> read      |        2.15 |        2.11
> ---------------------------------------
> randread  |        7.17 |        7.21
> ---------------------------------------
> write     |        2.11 |        2.08
> ---------------------------------------
> randwrite |         8.2 |        8.22
> ---------------------------------------
> [ ... ]

Hello Ming,

Although I would prefer to see measurement data against an SRP target system
that supports a higher workload (>1M IOPS) and also for a high-end NVMe drive,
I think the above data is sufficient to show that the performance impact of
your patch series is most likely small enough even for high-end SCSI initiator
drivers.

Bart.

Reply via email to