On 01/03/2018 03:03 PM, Coly Li wrote:
> When there are too many I/O errors on cache device, current bcache code
> will retire the whole cache set, and detach all bcache devices. But the
> detached bcache devices are not stopped, which is problematic when bcache
> is in writeback mode.
>
> If the retired cache set has dirty data of backing devices, continue
> writing to bcache device will write to backing device directly. If the
> LBA of write request has a dirty version cached on cache device, next time
> when the cache device is re-registered and backing device re-attached to
> it again, the stale dirty data on cache device will be written to backing
> device, and overwrite latest directly written data. This situation causes
> a quite data corruption.
>
> This patch checkes whether cache_set->io_disable is true in
> __cache_set_unregister(). If cache_set->io_disable is true, it means cache
> set is unregistering by too many I/O errors, then all attached bcache
> devices will be stopped as well. If cache_set->io_disable is not true, it
> means __cache_set_unregister() is triggered by writing 1 to sysfs file
> /sys/fs/bcache/<UUID>/bcache/stop. This is an exception because users do
> it explicitly, this patch keeps existing behavior and does not stop any
> bcache device.
>
> Even the failed cache device has no dirty data, stopping bcache device is
> still a desired behavior by many Ceph and data base users. Then their
> application will report I/O errors due to disappeared bcache device, and
> operation people will know the cache device is broken or disconnected.
>
> Signed-off-by: Coly Li <col...@suse.de>
> ---
> drivers/md/bcache/super.c | 8 ++++++++
> 1 file changed, 8 insertions(+)
>
> diff --git a/drivers/md/bcache/super.c b/drivers/md/bcache/super.c
> index 49d6fedf89c3..20a7a6959506 100644
> --- a/drivers/md/bcache/super.c
> +++ b/drivers/md/bcache/super.c
> @@ -1458,6 +1458,14 @@ static void __cache_set_unregister(struct closure *cl)
> dc = container_of(c->devices[i],
> struct cached_dev, disk);
> bch_cached_dev_detach(dc);
> + /*
> + * If we come here by too many I/O errors,
> + * bcache device should be stopped too, to
> + * keep data consistency on cache and
> + * backing devices.
> + */
> + if (c->io_disable)
> + bcache_device_stop(c->devices[i]);
> } else {
> bcache_device_stop(c->devices[i]);
> }
>
Reviewed-by: Hannes Reinecke <h...@suse.com>
Cheers,
Hannes
--
Dr. Hannes Reinecke Teamlead Storage & Networking
h...@suse.de +49 911 74053 688
SUSE LINUX GmbH, Maxfeldstr. 5, 90409 Nürnberg
GF: F. Imendörffer, J. Smithard, J. Guild, D. Upmanyu, G. Norton
HRB 21284 (AG Nürnberg)
