2018-07-22 18:13 GMT+02:00 Coly Li <[email protected]>:
> Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle")
> allows the writeback rate to be faster if there is no I/O request on a
> bcache device. It works well if there is only one bcache device attached
> to the cache set. If there are many bcache devices attached to a cache
> set, it may introduce performance regression because multiple faster
> writeback threads of the idle bcache devices will compete the btree level
> locks with the bcache device who have I/O requests coming.
>
> This patch fixes the above issue by only permitting fast writebac when
> all bcache devices attached on the cache set are idle. And if one of the
> bcache devices has new I/O request coming, minimized all writeback
> throughput immediately and let PI controller __update_writeback_rate()
> to decide the upcoming writeback rate for each bcache device.
>
> Also when all bcache devices are idle, limited wrieback rate to a small
> number is wast of thoughput, especially when backing devices are slower
> non-rotation devices (e.g. SATA SSD). This patch sets a max writeback
> rate for each backing device if the whole cache set is idle. A faster
> writeback rate in idle time means new I/Os may have more available space
> for dirty data, and people may observe a better write performance then.
>
> Please note bcache may change its cache mode in run time, and this patch
> still works if the cache mode is switched from writeback mode and there
> is still dirty data on cache.
Running with this patch on 4.17, I see reduced IO lags in desktop
usage during heavy writes. The reduction is minor but noticeable. The
small short IO lags seem to be fixed with this but I still see the
stalls with long lags in desktop usage. I don't address those to
bcache, tho. This seems more like an issue resulting from using bees
on btrfs.
> Fixes: Commit b1092c9af9ed ("bcache: allow quick writeback when backing idle")
> Cc: [email protected] #4.16+
> Signed-off-by: Coly Li <[email protected]>
> Cc: Michael Lyle <[email protected]>
Tested-by: Kai Krakow <[email protected]>
> ---
> drivers/md/bcache/bcache.h | 9 +---
> drivers/md/bcache/request.c | 42 ++++++++++++++-
> drivers/md/bcache/sysfs.c | 14 +++--
> drivers/md/bcache/util.c | 2 +-
> drivers/md/bcache/util.h | 2 +-
> drivers/md/bcache/writeback.c | 98 +++++++++++++++++++++++++----------
> 6 files changed, 126 insertions(+), 41 deletions(-)
>
> diff --git a/drivers/md/bcache/bcache.h b/drivers/md/bcache/bcache.h
> index d6bf294f3907..f7451e8be03c 100644
> --- a/drivers/md/bcache/bcache.h
> +++ b/drivers/md/bcache/bcache.h
> @@ -328,13 +328,6 @@ struct cached_dev {
> */
> atomic_t has_dirty;
>
> - /*
> - * Set to zero by things that touch the backing volume-- except
> - * writeback. Incremented by writeback. Used to determine when to
> - * accelerate idle writeback.
> - */
> - atomic_t backing_idle;
> -
> struct bch_ratelimit writeback_rate;
> struct delayed_work writeback_rate_update;
>
> @@ -514,6 +507,8 @@ struct cache_set {
> struct cache_accounting accounting;
>
> unsigned long flags;
> + atomic_t idle_counter;
> + atomic_t at_max_writeback_rate;
>
> struct cache_sb sb;
>
> diff --git a/drivers/md/bcache/request.c b/drivers/md/bcache/request.c
> index ae67f5fa8047..fe45f561a054 100644
> --- a/drivers/md/bcache/request.c
> +++ b/drivers/md/bcache/request.c
> @@ -1104,6 +1104,34 @@ static void detached_dev_do_request(struct
> bcache_device *d, struct bio *bio)
>
> /* Cached devices - read & write stuff */
>
> +static void quit_max_writeback_rate(struct cache_set *c)
> +{
> + int i;
> + struct bcache_device *d;
> + struct cached_dev *dc;
> +
> + mutex_lock(&bch_register_lock);
> +
> + for (i = 0; i < c->devices_max_used; i++) {
> + if (!c->devices[i])
> + continue;
> +
> + if (UUID_FLASH_ONLY(&c->uuids[i]))
> + continue;
> +
> + d = c->devices[i];
> + dc = container_of(d, struct cached_dev, disk);
> + /*
> + * set writeback rate to default minimum value,
> + * then let update_writeback_rate() to decide the
> + * upcoming rate.
> + */
> + atomic64_set(&dc->writeback_rate.rate, 1);
> + }
> +
> + mutex_unlock(&bch_register_lock);
> +}
> +
> static blk_qc_t cached_dev_make_request(struct request_queue *q,
> struct bio *bio)
> {
> @@ -1119,7 +1147,19 @@ static blk_qc_t cached_dev_make_request(struct
> request_queue *q,
> return BLK_QC_T_NONE;
> }
>
> - atomic_set(&dc->backing_idle, 0);
> + if (d->c) {
> + atomic_set(&d->c->idle_counter, 0);
> + /*
> + * If at_max_writeback_rate of cache set is true and new I/O
> + * comes, quit max writeback rate of all cached devices
> + * attached to this cache set, and set at_max_writeback_rate
> + * to false.
> + */
> + if (unlikely(atomic_read(&d->c->at_max_writeback_rate) == 1))
> {
> + atomic_set(&d->c->at_max_writeback_rate, 0);
> + quit_max_writeback_rate(d->c);
> + }
> + }
> generic_start_io_acct(q, rw, bio_sectors(bio), &d->disk->part0);
>
> bio_set_dev(bio, dc->bdev);
> diff --git a/drivers/md/bcache/sysfs.c b/drivers/md/bcache/sysfs.c
> index 225b15aa0340..d719021bff81 100644
> --- a/drivers/md/bcache/sysfs.c
> +++ b/drivers/md/bcache/sysfs.c
> @@ -170,7 +170,8 @@ SHOW(__bch_cached_dev)
> var_printf(writeback_running, "%i");
> var_print(writeback_delay);
> var_print(writeback_percent);
> - sysfs_hprint(writeback_rate, dc->writeback_rate.rate << 9);
> + sysfs_hprint(writeback_rate,
> + atomic64_read(&dc->writeback_rate.rate) << 9);
> sysfs_hprint(io_errors, atomic_read(&dc->io_errors));
> sysfs_printf(io_error_limit, "%i", dc->error_limit);
> sysfs_printf(io_disable, "%i", dc->io_disable);
> @@ -188,7 +189,8 @@ SHOW(__bch_cached_dev)
> char change[20];
> s64 next_io;
>
> - bch_hprint(rate, dc->writeback_rate.rate << 9);
> + bch_hprint(rate,
> + atomic64_read(&dc->writeback_rate.rate) << 9);
> bch_hprint(dirty, bcache_dev_sectors_dirty(&dc->disk)
> << 9);
> bch_hprint(target, dc->writeback_rate_target << 9);
> bch_hprint(proportional,dc->writeback_rate_proportional << 9);
> @@ -255,8 +257,12 @@ STORE(__cached_dev)
>
> sysfs_strtoul_clamp(writeback_percent, dc->writeback_percent, 0, 40);
>
> - sysfs_strtoul_clamp(writeback_rate,
> - dc->writeback_rate.rate, 1, INT_MAX);
> + if (attr == &sysfs_writeback_rate) {
> + int v;
> +
> + sysfs_strtoul_clamp(writeback_rate, v, 1, INT_MAX);
> + atomic64_set(&dc->writeback_rate.rate, v);
> + }
>
> sysfs_strtoul_clamp(writeback_rate_update_seconds,
> dc->writeback_rate_update_seconds,
> diff --git a/drivers/md/bcache/util.c b/drivers/md/bcache/util.c
> index fc479b026d6d..84f90c3d996d 100644
> --- a/drivers/md/bcache/util.c
> +++ b/drivers/md/bcache/util.c
> @@ -200,7 +200,7 @@ uint64_t bch_next_delay(struct bch_ratelimit *d, uint64_t
> done)
> {
> uint64_t now = local_clock();
>
> - d->next += div_u64(done * NSEC_PER_SEC, d->rate);
> + d->next += div_u64(done * NSEC_PER_SEC, atomic64_read(&d->rate));
>
> /* Bound the time. Don't let us fall further than 2 seconds behind
> * (this prevents unnecessary backlog that would make it impossible
> diff --git a/drivers/md/bcache/util.h b/drivers/md/bcache/util.h
> index cced87f8eb27..7e17f32ab563 100644
> --- a/drivers/md/bcache/util.h
> +++ b/drivers/md/bcache/util.h
> @@ -442,7 +442,7 @@ struct bch_ratelimit {
> * Rate at which we want to do work, in units per second
> * The units here correspond to the units passed to bch_next_delay()
> */
> - uint32_t rate;
> + atomic64_t rate;
> };
>
> static inline void bch_ratelimit_reset(struct bch_ratelimit *d)
> diff --git a/drivers/md/bcache/writeback.c b/drivers/md/bcache/writeback.c
> index ad45ebe1a74b..72059f910230 100644
> --- a/drivers/md/bcache/writeback.c
> +++ b/drivers/md/bcache/writeback.c
> @@ -49,6 +49,63 @@ static uint64_t __calc_target_rate(struct cached_dev *dc)
> return (cache_dirty_target * bdev_share) >> WRITEBACK_SHARE_SHIFT;
> }
>
> +static bool set_at_max_writeback_rate(struct cache_set *c,
> + struct cached_dev *dc)
> +{
> + int i, dirty_dc_nr = 0;
> + struct bcache_device *d;
> +
> + mutex_lock(&bch_register_lock);
> + for (i = 0; i < c->devices_max_used; i++) {
> + if (!c->devices[i])
> + continue;
> + if (UUID_FLASH_ONLY(&c->uuids[i]))
> + continue;
> + d = c->devices[i];
> + dc = container_of(d, struct cached_dev, disk);
> + if (atomic_read(&dc->has_dirty))
> + dirty_dc_nr++;
> + }
> + mutex_unlock(&bch_register_lock);
> +
> + /*
> + * Idle_counter is increased everytime when update_writeback_rate()
> + * is rescheduled in. If all backing devices attached to the same
> + * cache set has same dc->writeback_rate_update_seconds value, it
> + * is about 10 rounds of update_writeback_rate() is called on each
> + * backing device, then the code will fall through at set 1 to
> + * c->at_max_writeback_rate, and a max wrteback rate to each
> + * dc->writeback_rate.rate. This is not very accurate but works well
> + * to make sure the whole cache set has no new I/O coming before
> + * writeback rate is set to a max number.
> + */
> + if (atomic_inc_return(&c->idle_counter) < dirty_dc_nr * 10)
> + return false;
> +
> + if (atomic_read(&c->at_max_writeback_rate) != 1)
> + atomic_set(&c->at_max_writeback_rate, 1);
> +
> +
> + atomic64_set(&dc->writeback_rate.rate, INT_MAX);
> +
> + /* keep writeback_rate_target as existing value */
> + dc->writeback_rate_proportional = 0;
> + dc->writeback_rate_integral_scaled = 0;
> + dc->writeback_rate_change = 0;
> +
> + /*
> + * Check c->idle_counter and c->at_max_writeback_rate agagain in case
> + * new I/O arrives during before set_at_max_writeback_rate() returns.
> + * Then the writeback rate is set to 1, and its new value should be
> + * decided via __update_writeback_rate().
> + */
> + if (atomic_read(&c->idle_counter) < dirty_dc_nr * 10 ||
> + !atomic_read(&c->at_max_writeback_rate))
> + return false;
> +
> + return true;
> +}
> +
> static void __update_writeback_rate(struct cached_dev *dc)
> {
> /*
> @@ -104,8 +161,9 @@ static void __update_writeback_rate(struct cached_dev *dc)
>
> dc->writeback_rate_proportional = proportional_scaled;
> dc->writeback_rate_integral_scaled = integral_scaled;
> - dc->writeback_rate_change = new_rate - dc->writeback_rate.rate;
> - dc->writeback_rate.rate = new_rate;
> + dc->writeback_rate_change = new_rate -
> + atomic64_read(&dc->writeback_rate.rate);
> + atomic64_set(&dc->writeback_rate.rate, new_rate);
> dc->writeback_rate_target = target;
> }
>
> @@ -138,9 +196,16 @@ static void update_writeback_rate(struct work_struct
> *work)
>
> down_read(&dc->writeback_lock);
>
> - if (atomic_read(&dc->has_dirty) &&
> - dc->writeback_percent)
> - __update_writeback_rate(dc);
> + if (atomic_read(&dc->has_dirty) && dc->writeback_percent) {
> + /*
> + * If the whole cache set is idle, set_at_max_writeback_rate()
> + * will set writeback rate to a max number. Then it is
> + * unncessary to update writeback rate for an idle cache set
> + * in maximum writeback rate number(s).
> + */
> + if (!set_at_max_writeback_rate(c, dc))
> + __update_writeback_rate(dc);
> + }
>
> up_read(&dc->writeback_lock);
>
> @@ -422,27 +487,6 @@ static void read_dirty(struct cached_dev *dc)
>
> delay = writeback_delay(dc, size);
>
> - /* If the control system would wait for at least half a
> - * second, and there's been no reqs hitting the backing disk
> - * for awhile: use an alternate mode where we have at most
> - * one contiguous set of writebacks in flight at a time. If
> - * someone wants to do IO it will be quick, as it will only
> - * have to contend with one operation in flight, and we'll
> - * be round-tripping data to the backing disk as quickly as
> - * it can accept it.
> - */
> - if (delay >= HZ / 2) {
> - /* 3 means at least 1.5 seconds, up to 7.5 if we
> - * have slowed way down.
> - */
> - if (atomic_inc_return(&dc->backing_idle) >= 3) {
> - /* Wait for current I/Os to finish */
> - closure_sync(&cl);
> - /* And immediately launch a new set. */
> - delay = 0;
> - }
> - }
> -
> while (!kthread_should_stop() &&
> !test_bit(CACHE_SET_IO_DISABLE, &dc->disk.c->flags) &&
> delay) {
> @@ -715,7 +759,7 @@ void bch_cached_dev_writeback_init(struct cached_dev *dc)
> dc->writeback_running = true;
> dc->writeback_percent = 10;
> dc->writeback_delay = 30;
> - dc->writeback_rate.rate = 1024;
> + atomic64_set(&dc->writeback_rate.rate, 1024);
> dc->writeback_rate_minimum = 8;
>
> dc->writeback_rate_update_seconds =
> WRITEBACK_RATE_UPDATE_SECS_DEFAULT;
> --
> 2.17.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-bcache" in
> the body of a message to [email protected]
> More majordomo info at http://vger.kernel.org/majordomo-info.html
