Hi,
On Mon, Jul 22, 2019 at 09:39:07PM -0500, davidc502 wrote:
> See attached: nvme_io_trace.log
>
>
> On 7/22/19 9:19 PM, Ming Lei wrote:
> > Hi,
> >
> > On Sat, Jul 20, 2019 at 09:41:24PM -0500, davidc502 wrote:
> > > Hello,
> > >
> > > I've assembled a X570 board with a 1TB AORUS NVMe Gen4 SSD.
> > >
> > > When attempting to fstrim the NVMe, I receive the following error.
> > > davidc502@Ryzen-3900x:~$ sudo fstrim -a -v
> > > fstrim: /boot/efi: FITRIM ioctl failed: Input/output error
> > > fstrim: /: FITRIM ioctl failed: Input/output error
> > >
> > > Anyhow, I have put some details below which might be helpful. Note that
> > > this NVMe is supposed to be TRIM and SMART compliant. The SMART outputs
> > > are
> > > available using the utility “nvme-cli”.
> > > I am willing to provide whatever command outputs that are needed to help
> > > solve this issue.
> > >
> > > OS= Ubuntu 18.4.2 LTS
> > > Different Kernels I’ve tried = 5.1.16, 5.2 rc7, and 4.18
> > > fstrim version = fstrim from util-linux 2.31.1
> > > Firmware version for Aorus NVMe = EGFM11.0
> > >
> > I saw discard timeout on HGST 1.6TB NVMe, not sure if yours is same with
> > that one.
> >
> > Could you collect logs via the following steps?
> >
> > Suppose your nvme disk name is /dev/nvme0n1:
> >
> > 1) queue limits log:
> >
> > #(cd /sys/block/nvme0n1/queue && find . -type f -exec grep -aH . {} \;)
> >
> >
> > 2) NVMe IO trace
> >
> > - enable nvme IO trace before running fstrim:
> >
> > #echo 1 > /sys/kernel/debug/tracing/events/nvme_setup_cmd/enable
> > #echo 1 > /sys/kernel/debug/tracing/events/nvme_complete_rq/enable
> >
> > - run fstrim
> >
> > - after the fstrim failure is triggered, disable the nvme io trace & post
> > the log:
> >
> > #echo 0 > /sys/kernel/debug/tracing/events/nvme_setup_cmd/enable
> > #echo 0 > /sys/kernel/debug/tracing/events/nvme_complete_rq/enable
> >
> > #cp /sys/kernel/debug/tracing/trace /root/nvme_io_trace.log
> >
> >
> >
> > thanks,
> > Ming
>
>
> Hello Ming
>
> Thank you for the quick reply -- See attached
>From the IO trace, discard command(nvme_cmd_dsm) is failed:
kworker/15:1H-462 [015] .... 91814.342452: nvme_setup_cmd: nvme0:
disk=nvme0n1, qid=7, cmdid=552, nsid=1, flags=0x0, meta=0x0, cmd=(nvme_cmd_dsm
nr=0, attributes=4)
<idle>-0 [013] d.h. 91814.342708: nvme_complete_rq: nvme0:
disk=nvme0n1, qid=7, cmdid=552, res=0, retries=0, flags=0x0, status=8198
And the returned error code is 0x8198, I am not sure how to parse the
'Command Specific Status Values' of 0x98, maybe Christoph, Keith or our other
NVMe guys can help to understand the failure.
Thanks,
Ming
