Commit 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation")
introduced a validation for controllers with duplicate cntlid that runs
on nvme_init_subsystem(). The problem is that the validation relies on
ctrl->cntlid, and this value is assigned (from id_ctrl value) after the
call for nvme_init_subsystem() in nvme_init_identify() for non-fabrics
scenario. That leads to ctrl->cntlid always being 0 in case we have a
physical set of controllers in the same subsystem.
This patch fixes that by loading the discovered cntlid id_ctrl value into
ctrl->cntlid before the subsystem initialization, only for the non-fabrics
case. The patch was tested with emulated nvme devices (qemu) having two
controllers in a single subsystem. Without the patch, we couldn't make
it work failing in the duplicate check; when running with the patch, we
could see the subsystem holding both controllers.
For the fabrics case we see ctrl->cntlid has a more intricate relation
with the admin connect, so we didn't change that.
Fixes: 1b1031ca63b2 ("nvme: validate cntlid during controller initialisation")
Signed-off-by: Guilherme G. Piccoli <[email protected]>
---
drivers/nvme/host/core.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c
index 8f3fbe5ca937..cca270836892 100644
--- a/drivers/nvme/host/core.c
+++ b/drivers/nvme/host/core.c
@@ -2591,6 +2591,9 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
goto out_free;
}
+ if (!(ctrl->ops->flags & NVME_F_FABRICS))
+ ctrl->cntlid = le16_to_cpu(id->cntlid);
+
if (!ctrl->identified) {
int i;
@@ -2691,7 +2694,6 @@ int nvme_init_identify(struct nvme_ctrl *ctrl)
goto out_free;
}
} else {
- ctrl->cntlid = le16_to_cpu(id->cntlid);
ctrl->hmpre = le32_to_cpu(id->hmpre);
ctrl->hmmin = le32_to_cpu(id->hmmin);
ctrl->hmminds = le32_to_cpu(id->hmminds);
--
2.22.0
