On 08/22/2019 02:59 AM, [email protected] wrote:
> From: Xiubo Li <[email protected]>
>
> When the NBD_CFLAG_DESTROY_ON_DISCONNECT flag is set and at the same
> time when the socket is closed due to the server daemon is restarted,
> just before the last DISCONNET is totally done if we start a new connection
> by using the old nbd_index, there will be crashing randomly, like:
>
> <3>[ 110.151949] block nbd1: Receive control failed (result -32)
> <1>[ 110.152024] BUG: unable to handle page fault for address:
> 0000058000000840
> <1>[ 110.152063] #PF: supervisor read access in kernel mode
> <1>[ 110.152083] #PF: error_code(0x0000) - not-present page
> <6>[ 110.152094] PGD 0 P4D 0
> <4>[ 110.152106] Oops: 0000 [#1] SMP PTI
> <4>[ 110.152120] CPU: 0 PID: 6698 Comm: kworker/u5:1 Kdump: loaded Not
> tainted 5.3.0-rc4+ #2
> <4>[ 110.152136] Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
> <4>[ 110.152166] Workqueue: knbd-recv recv_work [nbd]
> <4>[ 110.152187] RIP: 0010:__dev_printk+0xd/0x67
> <4>[ 110.152206] Code: 10 e8 c5 fd ff ff 48 8b 4c 24 18 65 48 33 0c 25 28 00
> [...]
> <4>[ 110.152244] RSP: 0018:ffffa41581f13d18 EFLAGS: 00010206
> <4>[ 110.152256] RAX: ffffa41581f13d30 RBX: ffff96dd7374e900 RCX:
> 0000000000000000
> <4>[ 110.152271] RDX: ffffa41581f13d20 RSI: 00000580000007f0 RDI:
> ffffffff970ec24f
> <4>[ 110.152285] RBP: ffffa41581f13d80 R08: ffff96dd7fc17908 R09:
> 0000000000002e56
> <4>[ 110.152299] R10: ffffffff970ec24f R11: 0000000000000003 R12:
> ffff96dd7374e900
> <4>[ 110.152313] R13: 0000000000000000 R14: ffff96dd7374e9d8 R15:
> ffff96dd6e3b02c8
> <4>[ 110.152329] FS: 0000000000000000(0000) GS:ffff96dd7fc00000(0000)
> knlGS:0000000000000000
> <4>[ 110.152362] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> <4>[ 110.152383] CR2: 0000058000000840 CR3: 0000000067cc6002 CR4:
> 00000000001606f0
> <4>[ 110.152401] Call Trace:
> <4>[ 110.152422] _dev_err+0x6c/0x83
> <4>[ 110.152435] nbd_read_stat.cold+0xda/0x578 [nbd]
> <4>[ 110.152448] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152468] ? __switch_to_asm+0x40/0x70
> <4>[ 110.152478] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152491] ? __switch_to_asm+0x40/0x70
> <4>[ 110.152501] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152511] ? __switch_to_asm+0x40/0x70
> <4>[ 110.152522] ? __switch_to_asm+0x34/0x70
> <4>[ 110.152533] recv_work+0x35/0x9e [nbd]
> <4>[ 110.152547] process_one_work+0x19d/0x340
> <4>[ 110.152558] worker_thread+0x50/0x3b0
> <4>[ 110.152568] kthread+0xfb/0x130
> <4>[ 110.152577] ? process_one_work+0x340/0x340
> <4>[ 110.152609] ? kthread_park+0x80/0x80
> <4>[ 110.152637] ret_from_fork+0x35/0x40
>
> This is very easy to reproduce by running the nbd-runner.
>
> Signed-off-by: Xiubo Li <[email protected]>
> ---
> drivers/block/nbd.c | 36 +++++++++++++++++++++++++++++++++++-
> 1 file changed, 35 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/block/nbd.c b/drivers/block/nbd.c
> index 8c2f17b99224..a25b59725c6e 100644
> --- a/drivers/block/nbd.c
> +++ b/drivers/block/nbd.c
> @@ -26,6 +26,7 @@
> #include <linux/ioctl.h>
> #include <linux/mutex.h>
> #include <linux/compiler.h>
> +#include <linux/completion.h>
> #include <linux/err.h>
> #include <linux/kernel.h>
> #include <linux/slab.h>
> @@ -80,6 +81,9 @@ struct link_dead_args {
> #define NBD_RT_DESTROY_ON_DISCONNECT 6
> #define NBD_RT_DISCONNECT_ON_CLOSE 7
>
> +#define NBD_DESTROY_ON_DISCONNECT 0
> +#define NBD_DISCONNECT_REQUESTED 1
> +
> struct nbd_config {
> u32 flags;
> unsigned long runtime_flags;
> @@ -112,6 +116,9 @@ struct nbd_device {
> struct list_head list;
> struct task_struct *task_recv;
> struct task_struct *task_setup;
> +
> + struct completion destroy_complete;
> + unsigned long flags;
> };
>
> #define NBD_CMD_REQUEUED 1
> @@ -222,6 +229,16 @@ static void nbd_dev_remove(struct nbd_device *nbd)
> disk->private_data = NULL;
> put_disk(disk);
> }
> +
> + /*
> + * Place this in the last just before the nbd is freed to
> + * make sure that the disk and the related kobject are also
> + * totally removed to avoid duplicate creation of the same
> + * one.
> + */
> + if (test_bit(NBD_DESTROY_ON_DISCONNECT, &nbd->flags))
> + complete(&nbd->destroy_complete);
> +
> kfree(nbd);
> }
>
> @@ -230,8 +247,8 @@ static void nbd_put(struct nbd_device *nbd)
> if (refcount_dec_and_mutex_lock(&nbd->refs,
> &nbd_index_mutex)) {
> idr_remove(&nbd_index_idr, nbd->index);
> - mutex_unlock(&nbd_index_mutex);
> nbd_dev_remove(nbd);
> + mutex_unlock(&nbd_index_mutex);
> }
> }
>
> @@ -1103,6 +1120,7 @@ static int nbd_disconnect(struct nbd_device *nbd)
>
> dev_info(disk_to_dev(nbd->disk), "NBD_DISCONNECT\n");
> set_bit(NBD_RT_DISCONNECT_REQUESTED, &config->runtime_flags);
> + set_bit(NBD_DISCONNECT_REQUESTED, &nbd->flags);
> send_disconnects(nbd);
> return 0;
> }
> @@ -1596,6 +1614,7 @@ static int nbd_dev_add(int index)
> nbd->tag_set.flags = BLK_MQ_F_SHOULD_MERGE |
> BLK_MQ_F_BLOCKING;
> nbd->tag_set.driver_data = nbd;
> + init_completion(&nbd->destroy_complete);
>
> err = blk_mq_alloc_tag_set(&nbd->tag_set);
> if (err)
> @@ -1761,6 +1780,16 @@ static int nbd_genl_connect(struct sk_buff *skb,
> struct genl_info *info)
> mutex_unlock(&nbd_index_mutex);
> return -EINVAL;
> }
> +
> + if (test_bit(NBD_DESTROY_ON_DISCONNECT, &nbd->flags) &&
Why does this have to be set? If this is not set would you end up
hitting the config_refs check:
if (refcount_read(&nbd->config_refs)) {
and possibly returning failure?
If you moved the complete() to nbd_config_put would it work if this bit
was set or not?
> + test_bit(NBD_DISCONNECT_REQUESTED, &nbd->flags)) {
> + mutex_unlock(&nbd_index_mutex);
> +
> + /* Wait untill the recv_work exit */
If that is all you need we could do a flush_workqueue(nbd->recv_workq)
(you would need Jens's for next branch which has some work queue changes
in nbd).
I think that might be too messy with how we do the puts for the
nbd_device and config and the locking though.
> + wait_for_completion(&nbd->destroy_complete);
The completion is allocated as part of the nbd device struct. Right
after the other thread does a complete() we will free the nbd device
struct, and we could still access the destroy_complete completion in
this thread in wait_for_completion.
You would want to do DECLARE_COMPLETION_ONSTACK in this function, make
destroy_complete a pointer and set the destroy_complete pointer to the
completion declared in this function.
In nbd_dev_remove you would then just check if destroy_complete is set
to a non-NULL pointer.
> + goto again;
> + }
> +
> if (!refcount_inc_not_zero(&nbd->refs)) {
> mutex_unlock(&nbd_index_mutex);
> if (index == -1)
> @@ -1817,7 +1846,10 @@ static int nbd_genl_connect(struct sk_buff *skb,
> struct genl_info *info)
> if (flags & NBD_CFLAG_DESTROY_ON_DISCONNECT) {
> set_bit(NBD_RT_DESTROY_ON_DISCONNECT,
> &config->runtime_flags);
> + set_bit(NBD_DESTROY_ON_DISCONNECT, &nbd->flags);
> put_dev = true;
> + } else {
> + clear_bit(NBD_DESTROY_ON_DISCONNECT, &nbd->flags);
> }
> if (flags & NBD_CFLAG_DISCONNECT_ON_CLOSE) {
> set_bit(NBD_RT_DISCONNECT_ON_CLOSE,
> @@ -1987,10 +2019,12 @@ static int nbd_genl_reconfigure(struct sk_buff *skb,
> struct genl_info *info)
> if (!test_and_set_bit(NBD_RT_DESTROY_ON_DISCONNECT,
> &config->runtime_flags))
> put_dev = true;
> + set_bit(NBD_DESTROY_ON_DISCONNECT, &nbd->flags);
> } else {
> if (test_and_clear_bit(NBD_RT_DESTROY_ON_DISCONNECT,
> &config->runtime_flags))
> refcount_inc(&nbd->refs);
> + clear_bit(NBD_DESTROY_ON_DISCONNECT, &nbd->flags);
> }
>
> if (flags & NBD_CFLAG_DISCONNECT_ON_CLOSE) {
>
