Ol�
Pessoal,
j� esgotei todas minhas possibilidades de solu��o. Vamos ver se algu�m tem
alguma id�ia...
Eu tinha um HD master de uns 40Gb. Nele estavam o Win98 na particao primaria
e o CL 7 no restante do disco.
Havia o HD antigo como slave tb, de uns 3.2 Gb. Com uma particao FAT e outra
FAT32.
Minha id�ia era instalar o CL 8 "por cima" do CL 7. N�o fa�o questao de
manter os dados. Basta instalar mesmo.
Consegui os discos do CL 8, gerei o disco de boot, reiniciei, escolhi as
opcoes de instalar em portugues, confirmei a opcao do mouse que ele sugeriu,
selecionei o teclado.
Depois disso sempre d� a mesma tela. J� usei o Partition Magic pelo win e
exclui minha antiga particao extendida do Linux, mas mesmo assim n�o passa
dessa mensagem de erro:
====--- Advice ---====
Aconteceu algo de errado durante o processo de instalacao e nao eh possivel
continuar. O instalador pode gravar um arquivo de registro em um disquete
para analise posterior. Caso se queira fazer isso, insira um disquete na
unidade de disco. Lembre-se de que qualquer dado em seu disquete serah
perdido!
=======================
Seguem alguns logs (se algu�m estiver interessado, me peca em pvt -
[EMAIL PROTECTED] que enviarei os outros logs... n�o postei aqui pois
ultrapassaram o tamanho m�ximo de e-mail permitido nessa lista - 13312
bytes)
--------------------------------- inicio de
fdisk-l-u.log -------------------------------
Disk /dev/hda: 255 heads, 63 sectors, 4982 cylinders
Units = sectors of 1 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hda1 * 63 4883759 2441848+ b Win95 FAT32
/dev/hda2 4883760 80019764 37568002+ f Win95 Ext'd (LBA)
/dev/hda5 4883823 4980149 48163+ 83 Linux
/dev/hda6 4980213 79618139 37318963+ 83 Linux
/dev/hda7 79618203 80019764 200781 82 Linux swap
Disk /dev/hdb: 255 heads, 63 sectors, 524 cylinders
Units = sectors of 1 * 512 bytes
Device Boot Start End Blocks Id System
/dev/hdb1 * 63 1220939 610438+ 6 FAT16
/dev/hdb2 1220940 8418059 3598560 5 Extended
/dev/hdb5 1221003 8418059 3598528+ b Win95 FAT32
Disk /dev/hdc: 1 heads, 1336268 sectors, 1 cylinders
Units = sectors of 1 * 512 bytes
--------------------------------- fim de
fdisk-l-u.log -------------------------------
--------------------------------- inicio de
syslog -------------------------------
<4>Linux version 2.4.18-2clBOOT ([EMAIL PROTECTED]) (gcc version
2.95.3 20010315 (release)) #1 Sun Mar 10 22:59:59 BRT 2002
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000000c000000 (usable)
<4> BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
<4>On node 0 totalpages: 49152
<4>zone(0): 4096 pages.
<4>zone(1): 45056 pages.
<4>zone(2): 0 pages.
<4>Kernel command line: vga=4 expert
<6>Initializing CPU#0
<4>Detected 350.819 MHz processor.
<4>Console: colour VGA+ 80x30
<4>Calibrating delay loop... 699.59 BogoMIPS
<4>Memory: 190892k/196608k available (1005k kernel code, 5328k reserved,
287k data, 92k init, 0k highmem)
<4>Dentry-cache hash table entries: 32768 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 16384 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
<4>Buffer-cache hash table entries: 16384 (order: 4, 65536 bytes)
<4>Page-cache hash table entries: 65536 (order: 6, 262144 bytes)
<7>CPU: Before vendor init, caps: 0183f9ff 00000000 00000000, vendor = 0
<6>CPU: L1 I cache: 16K, L1 D cache: 16K
<6>CPU: L2 cache: 512K
<7>CPU: After vendor init, caps: 0183f9ff 00000000 00000000 00000000
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<7>CPU: After generic, caps: 0183f9ff 00000000 00000000 00000000
<7>CPU: Common caps: 0183f9ff 00000000 00000000 00000000
<4>CPU: Intel Pentium II (Deschutes) stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Checking 'hlt' instruction... OK.
<6>Checking for popad bug... OK.
<4>POSIX conformance testing by UNIFIX
<4>PCI: PCI BIOS revision 2.10 entry at 0xfdb31, last bus=1
<4>PCI: Using configuration type 1
<4>PCI: Probing PCI hardware
<6>PCI: Using IRQ router VIA [1106/0596] at 00:07.0
<6>Activating ISA DMA hang workarounds.
<6>Linux NET4.0 for Linux 2.4
<6>Based upon Swansea University Computer Society NET3.039
<4>Initializing RT netlink socket
<4>Starting kswapd
<6>Detected PS/2 Mouse Port.
<4>pty: 256 Unix98 ptys configured
<6>Serial driver version 5.05c (2001-07-08) with MANY_PORTS SHARE_IRQ
SERIAL_PCI enabled
<6>ttyS00 at 0x03f8 (irq = 4) is a 16550A
<6>ttyS01 at 0x02f8 (irq = 3) is a 16550A
<4>block: 128 slots per queue, batch=32
<4>RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
<6>Uniform Multi-Platform E-IDE driver Revision: 6.31
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<4>VP_IDE: IDE controller on PCI bus 00 dev 39
<4>VP_IDE: chipset revision 6
<4>VP_IDE: not 100% native mode: will probe irqs later
<4>ide: Assuming 33MHz system bus speed for PIO modes; override with
idebus=xx
<6>VP_IDE: VIA vt82c596a (rev 06) IDE UDMA33 controller on pci00:07.1
<4> ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:DMA
<4> ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio
<4>hda: Maxtor 4D040K2, ATA DISK drive
<4>hdb: SAMSUNG SV0432A, ATA DISK drive
<4>hdc: 50X CD-ROM, ATAPI CD/DVD-ROM drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>ide1 at 0x170-0x177,0x376 on irq 15
<6>hda: 80043264 sectors (40982 MB) w/2048KiB Cache, CHS=79408/16/63
<6>hdb: 8421840 sectors (4312 MB) w/482KiB Cache, CHS=524/255/63
<4>hdc: ATAPI 40X CD-ROM drive, 128kB Cache
<6>Uniform CD-ROM driver Revision: 3.12
<6>Partition check:
<6> hda: [EZD] [remap 0->1] [4982/255/63] hda1 hda2 < hda5 hda6 hda7 >
<6> hdb: hdb1 hdb2 < hdb5 >
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<6>loop: loaded (max 8 devices)
<6>SCSI subsystem driver Revision: 1.00
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP
<4>IP: routing cache hash table of 2048 buckets, 16Kbytes
<4>TCP: Hash tables configured (established 16384 bind 16384)
<6>NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
<5>RAMDISK: Compressed image found at block 0
<4>Freeing initrd memory: 613k freed
<4>VFS: Mounted root (ext2 filesystem).
<7>ISO 9660 Extensions: RRIP_1991A
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: irq timeout: status=0xc0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<6>end_request: I/O error, dev 16:00 (hdc), sector 1181444
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<6>end_request: I/O error, dev 16:00 (hdc), sector 1181448
<6>usb.c: registered new driver usbdevfs
<6>usb.c: registered new driver hub
<6>usb-uhci.c: $Revision: 1.275 $ time 23:08:42 Mar 10 2002
<6>usb-uhci.c: High bandwidth mode enabled
<6>PCI: Assigned IRQ 11 for device 00:07.2
<6>usb-uhci.c: USB UHCI at I/O 0xde00, IRQ 11
<4>usb-uhci.c: Detected 2 ports
<6>usb.c: new USB bus registered, assigned bus number 1
<6>hub.c: USB hub found
<6>hub.c: 2 ports detected
<6>usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
<6>usb.c: registered new driver hiddev
<6>usb.c: registered new driver hid
<6>hid-core.c: v1.8 Andreas Gal, Vojtech Pavlik <[EMAIL PROTECTED]>
<6>hid-core.c: USB HID support drivers
<6>mice: PS/2 mouse device common for all mice
<6>md: raid0 personality registered as nr 2
<6>md: raid1 personality registered as nr 3
<6>raid5: measuring checksumming speed
<4> 8regs : 609.600 MB/sec
<4> 32regs : 454.000 MB/sec
<4> pII_mmx : 799.200 MB/sec
<4> p5_mmx : 823.600 MB/sec
<4>raid5: using function: p5_mmx (823.600 MB/sec)
<6>md: raid5 personality registered as nr 4
<6>LVM version 1.0.1-rc4(ish)(03/10/2001) module loaded
<6>Journalled Block Device driver loaded
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<6>md: Autodetecting RAID arrays.
<6>md: autorun ...
<6>md: ... autorun DONE.
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: irq timeout: status=0xc0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<6>end_request: I/O error, dev 16:00 (hdc), sector 1181444
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<6>end_request: I/O error, dev 16:00 (hdc), sector 1181448
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<6>end_request: I/O error, dev 16:00 (hdc), sector 1181444
<4>hdc: irq timeout: status=0xd0 { Busy }
<4>hdc: ATAPI reset complete
<4>hdc: command error: status=0x51 { DriveReady SeekComplete Error }
<4>hdc: command error: error=0x54
<6>end_request: I/O error, dev 16:00 (hdc), sector 1181448
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 18
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 20
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 22
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 24
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 26
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 28
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 30
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 32
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 34
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 36
<4>floppy0: disk absent or changed during operation
<6>end_request: I/O error, dev 02:00 (floppy), sector 38
<6>attempt to access beyond end of device
<6>02:00: rw=0, want=10, limit=4
<6>attempt to access beyond end of device
<6>02:00: rw=0, want=11, limit=4
<6>attempt to access beyond end of device
<6>02:00: rw=0, want=12, limit=4
<4>floppy0: disk removed during i/o
<6>end_request: I/O error, dev 02:00 (floppy), sector 0
--------------------------------- fim de
syslog -------------------------------
os arquivos
cmds.out
e
gdboutput
tambem foram gerados, mas vazios
outro detalhe,
depois que exclui o conectiva linux 7, os logs nao foram mais gerados no
disquete
Agradeco qquer ajuda
Um abraco
Sobrinho
Assinantes em 28/05/2002: 2263
Mensagens recebidas desde 07/01/1999: 168869
Historico e [des]cadastramento: http://linux-br.conectiva.com.br
Assuntos administrativos e problemas com a lista:
mailto:[EMAIL PROTECTED]
