Do manual (RTFM) do FreeSwan :]
http://www.freeswan.org/freeswan_trees/freeswan-1.98b/doc/faq.html#noKLIPS
<manual>
ipsec_setup: Fatal error, kernel appears to lack KLIPS
These messages indicate an installation failure. The kernel you are running does not contain the KLIPS (kernel IPsec) code.
Note that the "modprobe: Can't locate module ipsec" message appears even if you are not using modules. If there is no KLIPS in your kernel, FreeS/WAN tries to load it as a module. If that fails, you get this message.
Commands you can quickly try are:
uname -a
to get details, including compilation date and time, of the currently running kernel
ls /
ls /boot
to ensure a new kernel is where it should be. If kernel compilation puts it in / but lilo wants it in /boot , then you should uncomment the INSTALL_PATH=/boot line in the kernel Makefile.
more /etc/lilo.conf
to see that lilo has correct information
lilo
to ensure that information in /etc/lilo.conf has been transferred to the boot sector
If those don't find the problem, you have to go back and check through the install procedure to see what was missed.
Here is one of Claudia's messages on the topic:
> I tried to install freeswan 1.8 on my mandrake 7.2 test box. ...
> It does show version and some output for whack.
Yes, because the Pluto (daemon) part of ipsec is installed correctly, but as we see below the kernel portion is not.
> However, I get the following from /var/log/messages:
>
> Mar 11 22:11:55 pavillion ipsec_setup: Starting FreeS/WAN IPsec 1.8...
> Mar 11 22:12:02 pavillion ipsec_setup: modprobe: Can't locate module ipsec
> Mar 11 22:12:02 pavillion ipsec_setup: Fatal error, kernel appears to lack
> KLIPS.
This is your problem. You have not successfully installed a kernel with IPSec machinery in it.
Did you build Linux FreeS/WAN as a module? If so, you need to ensure that your new module has been installed in the directory where your kernel loader normally finds your modules. If not, you need to ensure that the new IPSec-enabled kernel is being loaded correctly.
See also doc/install.html, and INSTALL in the distro.
</manual>
No manual do FreeSwan tem as respostas para todas suas d�vidas...
[]�s
S�rgio Val�rio
Sandro Carvalho wrote:
Ola lista.. fiz td segundo o manual conectiva.. mas qunado vou startar o servico ipsec...
#./ipsec start ipsec_setup: Starting FreeS/WAN IPsec 1.9... ipsec_setup: modprobe: Can't locate module ipsec ipsec_setup: Fatal error, kernel appears to lack KLIPS. Cannot continue IPsec startup.
alguem sabe o q pode ser???
--------------------------------------------------------------------------- Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utiliza��o da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
