O problema � o seguinte:
1) O scanner � reconhecido pelo sane-find-scanner:
[EMAIL PROTECTED] pinho]$ sane-find-scanner
# No SCSI scanners found. If you expected something different, make sure that
...
found USB scanner (vendor=0x04b8 [EPSON], product=0x011d [EPSON Scanner], chip=LM983x?) at libusb:001:004
# Your USB scanner was (probably) detected. It may or may not be supported by
# SANE. Try scanimage -L and read the backend's manpage.
# Not checking for parallel port scanners. ...
2) Mas n�o consigo us�-lo:
[EMAIL PROTECTED] pinho]$ scanimage scanimage: no SANE devices found
[EMAIL PROTECTED] pinho]$ xscanimage
[xscanimage] No scanners were identified. If you were expecting something
different, check that the scanner is plugged in, turned on and
detected by sane-find-scanner (if appropriate). Please read
the documentation which came with this software (README, FAQ,
manpages).[EMAIL PROTECTED] pinho]$ scanimage --device plustek:libusb:001:004
scanimage: open of device plustek:libusb:001:004 failed: Error during device I/O
[EMAIL PROTECTED] pinho]$ xscanimage plustek:libusb:001:004
(aparece uma janela mostrando erro de I/O tamb�m)
3) No desespero, editei o /etc/sane.d/dll.conf e deixei somente o backen plustek (o que suporta o meu scanner). N�o alterou nada.
4) No arquivo /etc/sane.d/plustek.conf
troquei [usb] por [usb] 0x04B8 0x011D
e
device auto por device libusb:001:004
e os mesmos erros continuaram. Tentei tamb�m rodar os programas como root e nada.
Algu�m tem alguma id�ia ? Por que diabos o sane-find-scanner reconhece o scanner e os programas n�o ?
--------------------------------------------------------------------------- Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utiliza��o da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
