Caros Colegas,
EU tenho uma DAT da TECMAR modelo WANGDAT 3200 instalado no Conectiva 9 atrav�s de uma adaptec 2940, porem qdo eu utilizo o m�dulo aic7xxx_old o sistema n�o reconhece dat como um dispositivo sequencial-access. Veja abaixo a sa�da do arquivo /proc/scsi/scsi e /proc/scsi/aic7xx/0
============================================================ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: 3.0eAFW0 Model: 3.0M Rev: 3.0M Type: Unknown ANSI SCSI revision: ffffffff
=======================================================================
=============================================================== cat /proc/scsi/aic7xxx/0 Adaptec AIC7xxx driver version: 5.2.4/5.2.0 Compile Options: TCQ Enabled By Default : Disabled AIC7XXX_PROC_STATS : Enabled
Adapter Configuration:
SCSI Adapter: Adaptec AHA-294X SCSI host adapter
Narrow Controller at PCI 0/8/0
PCI MMAPed I/O Base: 0xe0410000
Adapter SEEPROM Config: SEEPROM found and used.
Adaptec SCSI BIOS: Enabled
IRQ: 9
SCBs: Active 0, Max Active 1,
Allocated 31, HW 16, Page 255
Interrupts: 13
BIOS Control Word: 0x1096
Adapter Control Word: 0x0048
Extended Translation: Enabled
Disconnect Enable Flags: 0x00ff
Tag Queue Enable Flags: 0x0000
Ordered Queue Tag Flags: 0x0000
Default Tag Queue Depth: 8
Tagged Queue By Device array for aic7xxx host instance 0:
{255,255,255,255,255,255,255,255,255,255,255,255,255,255,255,255}
Actual queue depth per device for aic7xxx host instance 0:
{1,1,1,1,1,1,1,1,1,1,1,1,1,1,1,1}Statistics:
(scsi0:0:6:0)
Device using Narrow/Async transfers.
Transinfo settings: current(0/0/0/0), goal(255/0/0/0), user(0/0/0/0)
Total transfers 0 (0 reads and 0 writes)
< 2K 2K+ 4K+ 8K+ 16K+ 32K+ 64K+ 128K+
Reads: 0 0 0 0 0 0 0 0
Writes: 0 0 0 0 0 0 0 0
==============================================================
Verifique no google e n�o encontrei nenhuma solu��o.
Como eu posso for�ar o reconhecimento deste dispositivo pelo LINUX ?
Eu j� tentei usar a DAT como /dev/st0 , /dev/sg0, /dev/nst0, porem o Linux n�o consegue acessar o dispositivo.
Eu tb j� tentei usar o m�dulo aic7xxx porem o LINUX fica tentando inicializar o m�dulo e fica parado nisso (como se fosse em loop infinito).
Alguem pode me ajudar ?
Grato.
Adriano Frare
--------------------------------------------------------------------------- Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utiliza��o da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
