E a� galera! Como prometi, k� estou, mas sem sucesso nenhum!
Nem consegui acessar a cam por ptp pelo gtkam (depois de ter setado
isso nela) nem consegui montar a danada como um disco usb-storage.
Eu li que para realizar tal fa�anha precisaria do m�dulo sd_mod, mas
quando tento usar o modprobe acontece:
[EMAIL PROTECTED]:~# modprobe sd_mod
Note: /etc/modules.conf is more recent than /lib/modules/2.4.26/modules.dep
modprobe: Can't locate module sd_mod
Algu�m a� tem alguma dica?
Abaixo algumas informa��es relacionadas:
lsmod (resumido):
Module Size Used by Tainted: PF
usb-storage 69760 0 (unused)
apm 9996 0
ide-scsi 10096 1
isdn 121612 0 [hisax]
slhc 5392 0 [ppp_generic isdn]
isa-pnp 31504 0 [hisax]
uhci 25372 0 (unused)
ehci-hcd 18156 0 (unused)
usbcore 62220 1 [usb-storage uhci ehci-hcd]
via-rhine 12688 0 (unused)
mii 2368 0 [via-rhine]
crc32 2848 0 [via-rhine]
-----------------
lsusb
Bus 004 Device 001: ID 0000:0000
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 001: ID 0000:0000
Bus 001 Device 004: ID 054c:0010 Sony Corp.
DSC-S30/S70/S75/F505V/F505/FD92 Cybershot/Mavica Digital Camera
-------------------------
tail -f /var/log/messages (resumido)
Nov 20 16:33:32 darkstar -- MARK --
Nov 20 16:33:45 darkstar kernel: hub.c: new USB device 00:10.3-4,
assigned address 4
Nov 20 16:33:49 darkstar usb.agent[14218]: ... no modules for USB
product 54c/10/500
-----------------
dmesg (resumido)
Linux version 2.4.26 ([EMAIL PROTECTED]) (gcc version 3.3.4) #3 Mon Nov 1
01:29:06 BRST 2004
BIOS-provided physical RAM map:
Kernel command line: BOOT_IMAGE=Linux ro root=307 hdc=ide-scsi
ide_setup: hdc=ide-scsi
Initializing CPU#0
Detected 1661.967 MHz processor.
PCI: PCI BIOS revision 2.10 entry at 0xfb3a0, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router VIA [1106/3177] at 00:11.0
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS
MULTIPORT SHARE_IRQ SERIAL_PCI enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
ide0: BM-DMA at 0xe800-0xe807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xe808-0xe80f, BIOS settings: hdc:DMA, hdd:DMA
hda: Maxtor 6E040L0, ATA DISK drive
blk: queue c03c9820, I/O limit 4095Mb (mask 0xffffffff)
hdc: HL-DT-ST RW/DVD GCC-4480B, ATAPI CD/DVD-ROM drive
hdd: LTN525, ATAPI CD/DVD-ROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: attached ide-disk driver.
hda: host protected area => 1
hda: 80293248 sectors (41110 MB) w/2048KiB Cache, CHS=4998/255/63, UDMA(133)
hdd: attached ide-cdrom driver.
hdd: ATAPI 52X CD-ROM drive, 120kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Partition check:
hda: hda1 hda2 hda3 < hda5 hda6 hda7 > hda4
SCSI subsystem driver Revision: 1.00
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
kmod: failed to exec /sbin/modprobe -s -k scsi_hostadapter, errno = 2
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
PCI: Found IRQ 12 for device 00:10.3
ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 00:10.3: irq 12, pci mem d0e40000
usb.c: new USB bus registered, assigned bus number 1
ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4
hub.c: USB hub found
hub.c: 6 ports detected
uhci.c: USB Universal Host Controller Interface driver v1.1
PCI: Found IRQ 11 for device 00:10.0
PCI: Sharing IRQ 11 with 00:08.0
PCI: Sharing IRQ 11 with 00:12.0
uhci.c: USB UHCI at I/O 0xdc00, IRQ 11
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 10 for device 00:10.1
PCI: Sharing IRQ 10 with 00:09.0
uhci.c: USB UHCI at I/O 0xe000, IRQ 10
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
PCI: Found IRQ 5 for device 00:10.2
uhci.c: USB UHCI at I/O 0xe400, IRQ 5
usb.c: new USB bus registered, assigned bus number 4
hub.c: USB hub found
hub.c: 2 ports detected
hub.c: new USB device 00:10.3-4, assigned address 2
usb.c: USB device 2 (vend/prod 0x54c/0x10) is not claimed by any active driver.
usb.c: USB disconnect on device 00:10.3-4 address 2
hdc: attached ide-scsi driver.
scsi0 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: HL-DT-ST Model: RW/DVD GCC-4480B Rev: 1.02
Type: CD-ROM ANSI SCSI revision: 02
Attached scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 40x/40x writer cd/rw xa/form2 cdda tray
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16)
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
USB Mass Storage support registered.
hub.c: new USB device 00:10.3-4, assigned address 4
usb.c: USB device 4 (vend/prod 0x54c/0x10) is not claimed by any active driver.
------------------------
cat /proc/bus/usb/devices (resumido):
T: Bus=04 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI-alt Root Hub
S: SerialNumber=e400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=256ms
T: Bus=01 Lev=01 Prnt=01 Port=03 Cnt=01 Dev#= 4 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1
P: Vendor=054c ProdID=0010 Rev= 5.00
S: Manufacturer=Sony
S: Product=Sony DSC
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=ff Prot=01 Driver=(none)
E: Ad=01(O) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 512 Ivl=0ms
E: Ad=83(I) Atr=03(Int.) MxPS= 8 Ivl=4096ms
--------------------------
--
Um abra�o,
Erick Gomes Anast�cio
socrates.if.usp.br/~erickfis
---------------------------------------------------------------------------
Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br
Regras de utiliza��o da lista: http://linux-br.conectiva.com.br
FAQ: http://www.zago.eti.br/menu.html
