Caros,
estava com problemas para gravar DVDs com o cdrecord no Mandrake 10, mas com a ajuda do Gustavo consegui resolver este problema,
no entanto, ap�s gravado (cdrecord -v -dao dev=ATA:1,1,0 -data /home/backup/iso/backup1.iso) n�o consigo montar a unidade,
e como n�o tenho outro leitor de DVD n�o consigo saber se a grava��o est� OK.
Segue transcri��o da grava��o e da tentativa de montagem:
[EMAIL PROTECTED] scripts]# cdrecord -v -dao dev=ATA:1,1,0 -data /home/backup/iso/backup1.iso
Cdrecord-Clone 2.01a28-dvd (i686-pc-linux-gnu) Copyright (C) 1995-2004 J�rg Schilling
Note: This version is an unofficial (modified) version with DVD support
Note: and therefore may have bugs that are not present in the original.
Note: Please send bug reports or support requests to <[EMAIL PROTECTED]>.
Note: The author of cdrecord should not be bothered with problems in this version.
TOC Type: 1 = CD-ROM
scsidev: 'ATA:1,1,0'
devname: 'ATA'
scsibus: 1 target: 1 lun: 0
Warning: Using badly designed ATAPI via /dev/hd* interface.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.8'.
cdrecord: Warning: using inofficial libscg transport code version (warly-Mandrakelinux-scsi-linux-sg '@(#)scsi-linux-sg.c 1.81 04/04/18 Copyright 1997 J. Schilling').
SCSI buffer size: 64512
atapi: -1
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'HL-DT-ST'
Identifikation : 'DVDRAM GSA-4160B'
Revision : 'A300'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x001B
Profile: 0x0012
Profile: 0x0011
Profile: 0x0014
Profile: 0x0013
Profile: 0x001A
Profile: 0x001B (current)
Profile: 0x002B
Profile: 0x0010
Profile: 0x0009
Profile: 0x000A
Profile: 0x0008
Profile: 0x0002
cdrecord: Found DVD media: using cdr_mdvd.
Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd).
Driver flags : SWABAUDIO BURNFREE
Supported modes: PACKET SAO
Drive buf size : 1114112 = 1088 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 3490 MB
Total size: 4008 MB (397:07.56) = 1787067 sectors
Lout start: 4008 MB (397:09/42) = 1787067 sectors
Current Secsize: 2048
ATIP start of lead in: -150 (00:00/00)
ATIP start of lead out: 157789 (35:05/64)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
Blocks total: 2295104 Blocks current: 2295104 Blocks remaining: 508037
Starting to write CD/DVD at speed 4.0 in real SAO mode for single session.
Last chance to quit, starting real write 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
trackno=0
BURN-Free is OFF.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
cdrecord: WARNING: Drive returns wrong startsec (0) using -150
Starting new track at sector: 0
Track 01: 3490 of 3490 MB written (fifo 100%) [buf 98%] 4.1x.
Track 01: Total bytes read/written: 3659913216/3659913216 (1787067 sectors).
Writing time: 674.255s
Average write speed 4.0x.
Min drive buffer fill was 97%
Fixating...
Fixating time: 0.209s
cdrecord: fifo had 57648 puts and 57648 gets.
cdrecord: fifo was 0 times empty and 27783 times full, min fill was 25%.
[EMAIL PROTECTED] scripts]# mount /dev/cdrom /mnt/cdrom/ /dev/cdrom: Invalid argument mount: block device /dev/cdrom is write-protected, mounting read-only /dev/cdrom: Invalid argument mount: you must specify the filesystem type
Mais uma vez conto com a ajuda de voc�s.
Abra�os,
Bruno
Ent�o, ao gravar utilize o seguinte sintaxe [EMAIL PROTECTED] scripts]# cdrecord --dev=ATA:1,1,0 /home/backup/iso/backup1.iso
ou
[EMAIL PROTECTED] scripts]# cdrecord --dev=ATAPI:1,1,0 /home/backup/iso/backup1.iso
--------------------------------------------------------------------------- Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utiliza��o da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
