Esse modem � slmodem sim, no entanto, os pacotes bin�rios do CL n�o funcionam com o kernel > 2.6.10. Para funcionar � preciso compilar o driver na m�o e aplicar um patch.
Siga os procedimentos contidos nessa p�gina : http://www.ccl-br.com.br/artigos/linux-no-toshiba/
principalmente na parte de compila��o do winmodem, no entanto, antes de compila-lo aplique esse patch :
http://www.datiku.com/documents/2610_migration.php
Quanto ao mouse, no meu notebook o funcionamento � perfeito juntamente com o mouse usb da microsoft.
Envio abaixo meu XF86Config-4, ate+
Section "ServerLayout"
Identifier "NV AGP"
Screen "Screen AGP" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "SendCoreEvents"
InputDevice "TouchPad_ALPS" "CorePointer"
EndSection
Section "Files"
FontPath "/usr/X11R6/lib/X11/fonts/misc:unscaled"
FontPath "/usr/X11R6/lib/X11/fonts/TTF"
FontPath "/usr/X11R6/lib/X11/fonts/Type1"
FontPath "/usr/share/fonts/default/ghostscript"
FontPath "/usr/share/fonts/default/Type1-freefonts"
EndSectionSection "Module"
Load "extmod"
Load "glx"
#Load "dri"
Load "dbe"
Load "record"
Load "freetype"
Load "type1"
EndSectionSection "ServerFlags"
# Uncomment this to cause a core dump at the spot where a signal is
# received. This may leave the console in an unusable state, but may
# provide a better stack trace in the core dump to aid in debugging
#NoTrapSignals
# Uncomment this to disable the <Crtl><Alt><BS> server abort sequence
# This allows clients to receive this key event.
#DontZap
# Uncomment this to disable the <Crtl><Alt><KP_+>/<KP_-> mode switching
# sequences. This allows clients to receive these key events.
#DontZoom
# This allows the server to start up even if the
# mouse device can't be opened/initialised.
Option "allowmouseopenfail"
EndSectionSection "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "XkbModel" "toshiba_s3000"
Option "XkbLayout" "us_intl"
#Option "XkdDisable" "off"
EndSectionSection "InputDevice"
# Modified by mouseconfig
Identifier "Mouse0"
Driver "mouse"
Option "Device" "/dev/mouse"
Option "Protocol" "IMPS/2"
Option "Emulate3Buttons" "yes"
Option "ZAxisMapping" "4 5"
EndSectionSection "InputDevice"
Identifier "TouchPad_ALPS"
Driver "mouse"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
EndSectionSection "Monitor"
Identifier "Monitor0"
VendorName "Generic LCD Display"
ModelName "LCD Panel 1024x768"
HorizSync 31.5 - 48.5
VertRefresh 40.0 - 70.0
Option "DPMS" "true"
EndSectionSection "Device"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command. The BusID is usually optional when
# only using one graphics card.
Identifier "NV AGP"
Driver "nvidia"
#Driver "nv"
VendorName "nvidia"
VideoRam 32768
#BusID "PCI:1:0:0"
#Option "DPMS" "true"
Option "RenderAccel" "true"
Option "CursorShadow" "true"
Option "CursorShadowAlpha" "100"
Option "NoLogo" "true"
Option "DigitalVibrance" "2"
Option "AllowGLXWithComposite" "true"
Option "AllowGLXWithComposite" "true"
EndSectionSection "Device"
# update this with the PCI id of your card. Consult the output
# of the 'lspci' command. The BusID is usually optional when
# only using one graphics card.
# sample twinview setup
Identifier "NV AGP TwinView"
Driver "nvidia"
VendorName "nvidia"
Option "TwinView"
# be sure to replace the HorizSync and VertRefresh with correct values
# for your monitor!
Option "SecondMonitorHorizSync" "31-82"
Option "SecondMonitorVertRefresh" "55-120"
Option "TwinViewOrientation" "RightOf"
Option "MetaModes" "1280x1024,1280x1024; 1024x768,1024x768"
Option "ConnectedMonitor" "crt,crt"
BusID "PCI:1:0:0"
EndSectionSection "Screen"
Identifier "Screen AGP"
Device "NV AGP"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 4
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1024x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1024x768"
EndSubSection
EndSection
Section "Screen" Identifier "Screen AGP TwinView" Device "NV AGP TwinView" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 8 Modes "1280x1024" "1024x768" "800x600" "640x400" EndSubSection SubSection "Display" Depth 16 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection SubSection "Display" Depth 24 Modes "1280x1024" "1024x768" "800x600" "640x480" EndSubSection EndSection
Neo Darkman wrote:
Atualizei o sistema (Conectiva 10) instalado num notebook Toshiba Satellite 1905-S277 (P4 1.6GHz) quando logo usando o kernel 2.6.11-72032U10_16cl o touchpad fica "louco". O clique n�o funfa, �s vezes o cursor move aleatoriamente (mesmo sem estar com as m�os pr�ximas), outras vezes simplesmente n�o funciona. Todavia, se volto a logar com o kernel antigo 2.6.5-63077cl o touchpad funfa normalmente, ser� algum bug do kernel 2.6.11-72032U_16cl?
A prop�sito ainda n�o consegui fazer funfar o modem que h� nesse notebook, ele � um intel, o lspci retorna:
0000:00:1f.6 Modem: Intel Corp. Intel 537 [82801BA/BAM AC'97 Modem] (rev 05)
quando carrego o m�dulo slmodem, h� o retorno: HSF Modem can't find.
Alguma dica?
--------------------------------------------------------------------------- Esta lista � patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utiliza��o da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
