Olá lista. A configuração da minha placa de captura está quase lá. Andei fazendo uns testes e a captura(exibição) de sinal de video e audio vindo de um video cassete está fundionando normalmente. No entanfo o Tuner(presumo eu) não esta bem configurado, pois não consigo sintonizar nada. Ao digitar dmesg aparece umas infomações sobre o placa de captura (indicando que o modulo foi carrega sem problema) e o tuner. Mas usando estas informações no arquivo de configuração o Xawtev a captura de sianal da antena continua sem funcionar.
<<como está meu arquivo de configuração>> #capture = overlay #input = Television #norm = PAL-M #Channel = 51 #fine = # (-128..+127) ##key = d ##color = 50% #bright = 50% #hue = 50% #contrast = 50% # i2c #alias char-major-89 i2c-dev #options i2c-core i2c_debug=0 #options i2c-algo-bit bit_test=0 #bttv # para o i2c funcionar alias char-major-89 i2c-dev options i2c-core i2c_debug=1 options i2c-algo-bit bit_test=1 # carga do driver bttv alias char-major-81 videodev alias char-major-81 bttv options bttv card=72 radio=1 options tuner debug=5 type=2 # saída de som options snd-card-ens snd_index=0 options msp3400 mixer=1 <<saida co comando dmesg>> Linux video capture interface: v1.00 bttv: driver version 0.9.12 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). bttv0: Bt878 (rev 17) at 0000:00:0a.0, irq: 177, latency: 32, mmio: 0xf7800000 bttv0: detected: Prolink Pixelview PV-BT [card=72], PCI subsystem ID is 1554:4011 bttv0: using: Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM) [card=72,insmod option] bttv0: gpio: en=00000000, out=00000000 in=006fc0ff [init] bttv0: using tuner=5 bttv0: i2c: checking for TDA7432 @ 0x8a... not found tvaudio: TV audio decoder + audio/video mux driver tvaudio: known chips: tda9840,tda9873h,tda9874h/a,tda9850,tda9855,tea6300,tea6420,tda8425,pic16c54 (PV951),ta8874z tuner: chip found at addr 0xc2 i2c-bus bt878 #0 [sw] tuner: type set to 5 (Philips PAL_BG (FI1216 and compatibles)) by bt878 #0 [sw] bttv0: registered device video0 bttv0: registered device vbi0 bttv0: registered device radio0 bttv0: PLL: 28636363 => 35468950 .. ok bttv0: add subdevice "remote0" Perguntas: Alguém sugere alguma solução? O que é i2c? O que signifiva este "type=x" neta linha: "options tuner debug=5 type=2"? obrigado --------------------------------------------- User number #360177 Ajude a contar os usuários Linux! Vá em http://counter.li.org/ e registre-se --------------------------------------------- _______________________________________________________ Yahoo! Acesso Grátis - Internet rápida e grátis. Instale o discador agora! http://br.acesso.yahoo.com/ --------------------------------------------------------------------------- Esta lista é patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br Regras de utilização da lista: http://linux-br.conectiva.com.br FAQ: http://www.zago.eti.br/menu.html
