Olá pessoal,
Estou tentando usar o kernel 2.6.13 mas não consigo "bootá-lo"
corretamente. Desconfio que seja problema com controladora de HD.
Olhem o q acontece:
VFS: Cannot open root device "2103" or unknown-block(33,3)
Please append a correct "root=" boot option
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(33,3)
Meu /proc/partitions:
major minor #blocks name rio rmerge rsect ruse wio wmerge wsect
wuse running use aveq
33 0 39088896 ide/host2/bus0/target0/lun0/disc 13870 32650
371802 553390 7615 21325 231656 1773570 -1 5572320 39648682
33 1 104391 ide/host2/bus0/target0/lun0/part1 0 0 0 0 0 0 0 0 0 0 0
33 2 787185 ide/host2/bus0/target0/lun0/part2 1 0 8 10 0 0 0 0 0 10 10
33 3 12691350 ide/host2/bus0/target0/lun0/part3 10537 19287
238544 386150 5236 5330 84640 1227890 0 158660 1614040
33 4 25503187 ide/host2/bus0/target0/lun0/part4 3330 13357
133234 167190 2379 15995 147016 545680 0 48990 712910
O boot com o kernel 2.4.26:
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ide: late registration of driver.
VP_IDE: IDE controller at PCI slot 00:04.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci00:04.1
ide0: BM-DMA at 0xb800-0xb807, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xb808-0xb80f, BIOS settings: hdc:pio, hdd:pio
PDC20265: IDE controller at PCI slot 00:11.0
PCI: Found IRQ 11 for device 00:11.0
PDC20265: chipset revision 2
PDC20265: not 100% native mode: will probe irqs later
PDC20265: (U)DMA Burst Bit ENABLED Primary PCI Mode Secondary PCI Mode.
ide2: BM-DMA at 0x7800-0x7807, BIOS settings: hde:DMA, hdf:pio
ide3: BM-DMA at 0x7808-0x780f, BIOS settings: hdg:DMA, hdh:pio
hda: CREATIVE CD5233E-CF, ATAPI CD/DVD-ROM drive
hde: QUANTUM FIREBALLlct20 40, ATA DISK drive
blk: queue f08277c8, I/O limit 4095Mb (mask 0xffffffff)
spurious 8259A interrupt: IRQ7.
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide2 at 0x9000-0x9007,0x8802 on irq 11
hde: attached ide-disk driver.
hde: 78177792 sectors (40027 MB) w/418KiB Cache, CHS=77557/16/63, UDMA(33)
Partition check:
/dev/ide/host2/bus0/target0/lun0: [PTBL] [4866/255/63] p1 p2 p3 p4
Journalled Block Device driver loaded
VFS: Can't find ext3 filesystem on dev ide2(33,3).
VFS: Can't find ext2 filesystem on dev ide2(33,3).
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide2(33,3)) ...
for (ide2(33,3))
ide2(33,3):Using r5 hash to sort names
VFS: Can't find ext3 filesystem on dev ide2(33,3).
VFS: Can't find ext2 filesystem on dev ide2(33,3).
reiserfs: found format "3.6" with standard journal
reiserfs: checking transaction log (device ide2(33,3)) ...
for (ide2(33,3))
ide2(33,3):Using r5 hash to sort names
Adding Swap: 787168k swap-space (priority -1)
hda: attached ide-cdrom driver.
hda: ATAPI 52X CD-ROM drive, 120kB Cache, DMA
Uniform CD-ROM driver Revision: 3.12
Real Time Clock Driver v1.10f
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide2(33,4), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Minhas opções de compilação do kernel (lembrando q tenho um Athlon,
chipset VIA VT8363/8365 [KT133/KM133] (rev 3)):
CONFIG_IDE=y
CONFIG_BLK_DEV_IDE=y
CONFIG_BLK_DEV_IDEDISK=y
CONFIG_IDEDISK_MULTI_MODE=y
CONFIG_BLK_DEV_IDECD=y
CONFIG_BLK_DEV_IDEFLOPPY=y
CONFIG_BLK_DEV_IDESCSI=m
CONFIG_IDE_GENERIC=y
CONFIG_BLK_DEV_IDEPCI=y
CONFIG_IDEPCI_SHARE_IRQ=y
CONFIG_BLK_DEV_IDEDMA_PCI=y
CONFIG_IDEDMA_PCI_AUTO=y
CONFIG_BLK_DEV_IT821X=y
CONFIG_BLK_DEV_PDC202XX_OLD=y
CONFIG_PDC202XX_BURST=y
CONFIG_BLK_DEV_PDC202XX_NEW=y
CONFIG_PDC202XX_FORCE=y
CONFIG_BLK_DEV_VIA82CXXX=y
CONFIG_IDEDMA_AUTO=y
As opções de ext2, 3 e reiserfs estão habilitadas tb, entre outras
coisas. Desconfio q não estou compilando alguma coisa q a controladora
exige. Será q alguém tem uma luz??? Quero deixar esse kernel
redondinho com minha máquina, pois preciso de desempenho.
Obrigados e abraços,
Carlos
--
Carlos Eduardo de Andrade
---------------------------------------------------------------------------
Esta lista é patrocinada pela Conectiva S.A. Visite http://www.conectiva.com.br
Arquivo: http://bazar2.conectiva.com.br/mailman/listinfo/linux-br
Regras de utilização da lista: http://linux-br.conectiva.com.br
FAQ: http://www.zago.eti.br/menu.html
