Read-policy type 'device' and device flag 'read-preferred':
The read-policy type device picks the device(s) flagged as
read-preferred for reading stripes of type raid1, raid10,
raid1c3 and raid1c4.
A system might contain SSD, nvme, iscsi, or san lun, and which are all
a non-rotational device, so it is not a good idea to set the read-preferred
automatically. Instead, device read-policy along with the read-preferred
flag provides an ability to do it manually. This advanced tuning is useful
in more than one situation, for example,
- In heterogeneous-disk volume, it provides an ability to manually choose
the low latency disks for reading.
- Useful for more accurate testing.
- Avoid known problematic device from reading the chunk until it is
replaced (by marking the other good devices as read-preferred).
Note:
If the read-policy type is set to 'device', but there isn't any device
which is flagged as read-preferred, then stripe 0 is used for reading.
The device replacement won't migrate the read-preferred flag to the new
replace the target device.
As of now, this is an in-memory only feature.
It's pointless to set the read-preferred flag on the missing device, as
IOs aren't submitted to the missing device.
If there is more than one read-preferred device in a chunk, the read IO
shall go to the stripe 0 as of now.
Usage example:
Consider a typical two disks raid1.
Configure devid1 for reading.
$ echo 1 > devinfo/1/read_preferred
$ cat devinfo/1/read_preferred
1
$ cat devinfo/2/read_preferred
0
$ pwd
/sys/fs/btrfs/12345678-1234-1234-1234-123456789abc
$ cat read_policy
[pid] device
$ echo device > ./read_policy
$ cat read_policy
pid [device]
Now read IOs are sent to devid 1 (sdb).
$ echo 3 > /proc/sys/vm/drop_caches
$ md5sum /btrfs/YkZI
$ iostat -zy 1 | egrep 'sdb|sdc' (from another terminal)
sdb 50.00 40048.00 0.00 40048 0
Change the read-preferred device from devid 1 to devid 2 (sdc).
$ echo 0 > ./devinfo/1/read_preferred
[ 3343.918658] BTRFS info (device sdb): reset read preferred on devid 1 (1334)
$ echo 1 > ./devinfo/2/read_preferred
[ 3343.919876] BTRFS info (device sdb): set read preferred on devid 2 (1334)
$ echo 3 > /proc/sys/vm/drop_caches
$ md5sum /btrfs/YkZI
Further read ios are sent to devid 2 (sdc).
$ iostat -zy 1 | egrep 'sdb|sdc' (from another terminal)
sdc 49.00 40048.00 0.00 40048 0
Signed-off-by: Anand Jain <[email protected]>
Reviewed-by: Josef Bacik <[email protected]>
---
v4: add Josef rb.
v3: update the change log.
v2: -
rfc->v1: -
fs/btrfs/sysfs.c | 3 ++-
fs/btrfs/volumes.c | 22 ++++++++++++++++++++++
fs/btrfs/volumes.h | 2 ++
3 files changed, 26 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/sysfs.c b/fs/btrfs/sysfs.c
index 5888e15e3d14..dd1835a2a7ab 100644
--- a/fs/btrfs/sysfs.c
+++ b/fs/btrfs/sysfs.c
@@ -916,7 +916,8 @@ static bool strmatch(const char *buffer, const char *string)
}
/* Must follow the order as in enum btrfs_read_policy */
-static const char * const btrfs_read_policy_name[] = { "pid", "latency" };
+static const char * const btrfs_read_policy_name[] = { "pid", "latency",
+ "device" };
static ssize_t btrfs_read_policy_show(struct kobject *kobj,
struct kobj_attribute *a, char *buf)
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index f361f1c87eb6..d942260f8d2c 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -5524,6 +5524,25 @@ static int btrfs_find_best_stripe(struct btrfs_fs_info
*fs_info,
return best_stripe;
}
+static int btrfs_find_read_preferred(struct map_lookup *map, int first, int
num_stripe)
+{
+ int stripe_index;
+ int last = first + num_stripe;
+
+ /*
+ * If there are more than one read preferred devices, then just pick the
+ * first found read preferred device as of now.
+ */
+ for (stripe_index = first; stripe_index < last; stripe_index++) {
+ if (test_bit(BTRFS_DEV_STATE_READ_PREFERRED,
+ &map->stripes[stripe_index].dev->dev_state))
+ return stripe_index;
+ }
+
+ /* If there is no read preferred device then just use the first stripe
*/
+ return first;
+}
+
static int find_live_mirror(struct btrfs_fs_info *fs_info,
struct map_lookup *map, int first,
int dev_replace_is_ongoing)
@@ -5557,6 +5576,9 @@ static int find_live_mirror(struct btrfs_fs_info *fs_info,
preferred_mirror = btrfs_find_best_stripe(fs_info, map, first,
num_stripes);
break;
+ case BTRFS_READ_POLICY_DEVICE:
+ preferred_mirror = btrfs_find_read_preferred(map, first,
num_stripes);
+ break;
}
if (dev_replace_is_ongoing &&
diff --git a/fs/btrfs/volumes.h b/fs/btrfs/volumes.h
index ea786864b903..8d5a2cddc0ab 100644
--- a/fs/btrfs/volumes.h
+++ b/fs/btrfs/volumes.h
@@ -225,6 +225,8 @@ enum btrfs_read_policy {
BTRFS_READ_POLICY_PID,
/* Find and use device with the lowest latency */
BTRFS_READ_POLICY_LATENCY,
+ /* Use the device marked with READ_PREFERRED state */
+ BTRFS_READ_POLICY_DEVICE,
BTRFS_NR_READ_POLICY,
};
--
2.28.0
