Run basic btrfs information commands in various ways, performing
sanity tests of: filesystem show, label, sync, and device stats
(sync is included just because it's simple). These are mostly
just smoke tests, although for example show by label & UUID
should verify that the correct fs was shown.
This also adds quite a few new filters to accommodate the output
of the new commands.
Cc: linux-btrfs@vger.kernel.org
Signed-off-by: Eric Sandeen <sand...@redhat.com>
---
V2: sort & uniq device stats output to account for variable
nrs. of devices. Optionally check that the proper nr. of
devices was returned, as well.
V3: _filter_uuid needs to pay attention to $1, not hope
that the caller has set $UUID. Oops.
diff --git a/313 b/313
new file mode 100755
index 0000000..579b0d3
--- /dev/null
+++ b/313
@@ -0,0 +1,96 @@
+#! /bin/bash
+# FS QA Test No. 313
+#
+# run basic btrfs information commands in various ways
+# sanity tests: filesystem show, label, sync, and device stats
+#
+#-----------------------------------------------------------------------
+# Copyright (c) 2013 Red Hat, Inc. All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
+#-----------------------------------------------------------------------
+#
+# creator
+owner=sand...@redhat.com
+
+seq=`basename $0`
+echo "== QA output created by $seq"
+
+here=`pwd`
+tmp=/tmp/$$
+status=1 # failure is the default!
+trap "_cleanup; exit \$status" 0 1 2 3 15
+
+_cleanup()
+{
+ cd /
+ rm -f $tmp.*
+}
+
+# get standard environment, filters and checks
+. ./common.rc
+. ./btrfs.filter
+
+# real QA test starts here
+
+# Modify as appropriate.
+_supported_fs btrfs
+_supported_os Linux
+_require_scratch
+_require_scratch_dev_pool
+
+rm -f $seq.full
+
+FIRST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $1}'`
+LAST_POOL_DEV=`echo $SCRATCH_DEV_POOL | awk '{print $NF}'`
+TOTAL_DEVS=`echo $SCRATCH_DEV $SCRATCH_DEV_POOL | wc -w`
+LABEL=TestLabel.$seq
+
+echo "Scratch $SCRATCH_DEV First $FIRST_POOL_DEV last $LAST_POOL_DEV Total
$TOTAL_DEVS" > $seq.full
+
+_scratch_mkfs $SCRATCH_DEV_POOL >> $seq.full 2>&1 || _fail "mkfs failed"
+
+# These have to be done unmounted...?
+echo "== Set filesystem label to $LABEL"
+$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV $LABEL
+echo "== Get filesystem label"
+$BTRFS_UTIL_PROG filesystem label $SCRATCH_DEV
+
+echo "== Mount."
+_scratch_mount
+
+echo "== Show filesystem by label"
+$BTRFS_UTIL_PROG filesystem show $LABEL | _filter_btrfs_filesystem_show
$TOTAL_DEVS
+UUID=`$BTRFS_UTIL_PROG filesystem show $LABEL | grep uuid: | awk '{print $NF}'`
+
+echo "UUID $UUID" >> $seq.full
+
+echo "== Show filesystem by UUID"
+$BTRFS_UTIL_PROG filesystem show $UUID | _filter_btrfs_filesystem_show
$TOTAL_DEVS $UUID
+
+echo "== Sync filesystem"
+$BTRFS_UTIL_PROG filesystem sync $SCRATCH_MNT | _filter_scratch
+
+echo "== Show device stats by mountpoint"
+$BTRFS_UTIL_PROG device stats $SCRATCH_MNT | _filter_btrfs_device_stats
$TOTAL_DEVS
+echo "== Show device stats by first/scratch dev"
+$BTRFS_UTIL_PROG device stats $SCRATCH_DEV | _filter_btrfs_device_stats
+echo "== Show device stats by second dev"
+$BTRFS_UTIL_PROG device stats $FIRST_POOL_DEV | sed -e
"s,$FIRST_POOL_DEV,FIRST_POOL_DEV,g"
+echo "== Show device stats by last dev"
+$BTRFS_UTIL_PROG device stats $LAST_POOL_DEV | sed -e
"s,$LAST_POOL_DEV,LAST_POOL_DEV,g"
+
+# success, all done
+status=0
+exit
diff --git a/313.out b/313.out
new file mode 100644
index 0000000..f513bdd
--- /dev/null
+++ b/313.out
@@ -0,0 +1,41 @@
+== QA output created by 313
+== Set filesystem label to TestLabel.313
+== Get filesystem label
+TestLabel.313
+== Mount.
+== Show filesystem by label
+Label: 'TestLabel.313' uuid: <UUID>
+ Total devices <EXACTNUM> FS bytes used <SIZE>
+ devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
+
+== Show filesystem by UUID
+Label: 'TestLabel.313' uuid: <EXACTUUID>
+ Total devices <EXACTNUM> FS bytes used <SIZE>
+ devid <DEVID> size <SIZE> used <SIZE> path SCRATCH_DEV
+
+== Sync filesystem
+FSSync 'SCRATCH_MNT'
+== Show device stats by mountpoint
+ <NUMDEVS> [SCRATCH_DEV].corruption_errs <NUM>
+ <NUMDEVS> [SCRATCH_DEV].flush_io_errs <NUM>
+ <NUMDEVS> [SCRATCH_DEV].generation_errs <NUM>
+ <NUMDEVS> [SCRATCH_DEV].read_io_errs <NUM>
+ <NUMDEVS> [SCRATCH_DEV].write_io_errs <NUM>
+== Show device stats by first/scratch dev
+[SCRATCH_DEV].corruption_errs <NUM>
+[SCRATCH_DEV].flush_io_errs <NUM>
+[SCRATCH_DEV].generation_errs <NUM>
+[SCRATCH_DEV].read_io_errs <NUM>
+[SCRATCH_DEV].write_io_errs <NUM>
+== Show device stats by second dev
+[FIRST_POOL_DEV].write_io_errs 0
+[FIRST_POOL_DEV].read_io_errs 0
+[FIRST_POOL_DEV].flush_io_errs 0
+[FIRST_POOL_DEV].corruption_errs 0
+[FIRST_POOL_DEV].generation_errs 0
+== Show device stats by last dev
+[LAST_POOL_DEV].write_io_errs 0
+[LAST_POOL_DEV].read_io_errs 0
+[LAST_POOL_DEV].flush_io_errs 0
+[LAST_POOL_DEV].corruption_errs 0
+[LAST_POOL_DEV].generation_errs 0
diff --git a/btrfs.filter b/btrfs.filter
new file mode 100644
index 0000000..8a749bf
--- /dev/null
+++ b/btrfs.filter
@@ -0,0 +1,60 @@
+# Filters for btrfs command output
+
+. ./common.filter
+
+# Some, but not all, commands emit "Btrfs <version>"
+_filter_btrfs_version()
+{
+ sed -e "s/^Btrfs.*//g"
+}
+
+_filter_devid()
+{
+ sed -e "s/\(devid\s\+\)[0-9]\+/\1 <DEVID>/g"
+}
+
+# If passed a number as first arg, filter that number of devices
+# If passed a UUID as second arg, filter that exact UUID
+_filter_btrfs_filesystem_show()
+{
+ if [ ! -z $1 ]; then
+ NUMDEVS=$1
+ NUM_SUBST="<EXACTNUM>"
+ else
+ NUMDEVS="[0-9]\+"
+ NUM_SUBST="<NUM>"
+ fi
+
+ UUID=""
+ if [ ! -z $2 ]; then
+ UUID=$2
+ fi
+
+ # the uniq collapses all device lines into 1
+ _filter_uuid $UUID | _filter_scratch | _filter_scratch_pool | \
+ _filter_size | _filter_btrfs_version | _filter_devid | \
+ sed -e "s/\(Total devices\) $NUMDEVS/\1 $NUM_SUBST/g" | \
+ uniq
+}
+
+# This eliminates all numbers, and shows only unique lines,
+# to accomodate a varying nr. of devices.
+# If given an argument, make sure we saw that many devices
+# in total.
+_filter_btrfs_device_stats()
+{
+ if [ ! -z $1 ]; then
+ NUMDEVS=$1
+ UNIQ_OPT="-c"
+ else
+ NUMDEVS="thiswillnotmatch"
+ UNIQ=""
+ fi
+
+ _filter_scratch | _filter_scratch_pool | \
+ sed -e "s/[0-9]\+$/<NUM>/g" | sort | uniq $UNIQ_OPT | \
+ sed -e "s/$NUMDEVS /<NUMDEVS> /g"
+}
+
+# make sure this script returns success
+/bin/true
diff --git a/common.filter b/common.filter
index c854a98..c34809f 100644
--- a/common.filter
+++ b/common.filter
@@ -226,6 +226,13 @@ _filter_scratch()
sed -e "s,$SCRATCH_DEV,SCRATCH_DEV,g" -e "s,$SCRATCH_MNT,SCRATCH_MNT,g"
}
+# Turn any device in the scratch pool into SCRATCH_DEV
+_filter_scratch_pool()
+{
+ FILTER_STRINGS=`echo $SCRATCH_DEV_POOL | sed -e 's/\s\+/\\\|/g'`
+ sed -e "s,$FILTER_STRINGS,SCRATCH_DEV,g"
+}
+
_filter_spaces()
{
sed -e 's/ [ ]*/ /g'
@@ -238,5 +245,23 @@ _filter_ln()
-e "s,failed to create,creating,"
}
+# If given an arg, filter *that* UUID string
+# Otherwise look for something that looks like a generic UUID
+_filter_uuid()
+{
+ if [ ! -z $1 ]; then
+ UUID=$1
+ sed -e "s/\(uuid:\) $UUID/\1 <EXACTUUID>/i"
+ else
+ sed -e "s/\(uuid:\) *[0-9a-f-][0-9a-f-]*/\1 <UUID>/i"
+ fi
+}
+
+# Filter out sizes like 6.14MB etc
+_filter_size()
+{
+ sed -e "s/[0-9\.]\+\s\?[b|k|m|g|t][b]\?/<SIZE>/ig"
+}
+
# make sure this script returns success
/bin/true
diff --git a/group b/group
index 8096968..fcbdfb6 100644
--- a/group
+++ b/group
@@ -429,3 +429,4 @@ stress
303 aio dangerous ioctl rw stress
304 aio dangerous ioctl rw stress
305 aio dangerous enospc rw stress
+313 auto quick
--
To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
