Cleanup the unneeded codes only for special cases. Since the new, more generic but simpler codes are already here, use them.
Signed-off-by: Qu Wenruo <[email protected]> --- It feels so good just pressing 'd' in vim!!! --- fs/btrfs/qgroup.c | 249 ------------------------------------------------------ 1 file changed, 249 deletions(-) diff --git a/fs/btrfs/qgroup.c b/fs/btrfs/qgroup.c index 16240e6..88abd13 100644 --- a/fs/btrfs/qgroup.c +++ b/fs/btrfs/qgroup.c @@ -1564,222 +1564,6 @@ static int qgroup_update_refcnt(struct btrfs_fs_info *fs_info, return 0; } -static int qgroup_calc_old_refcnt(struct btrfs_fs_info *fs_info, - u64 root_to_skip, struct ulist *tmp, - struct ulist *roots, struct ulist *qgroups, - u64 seq, int *old_roots, int rescan) -{ - struct ulist_node *unode; - struct ulist_iterator uiter; - struct ulist_node *tmp_unode; - struct ulist_iterator tmp_uiter; - struct btrfs_qgroup *qg; - int ret; - - ULIST_ITER_INIT(&uiter); - while ((unode = ulist_next(roots, &uiter))) { - /* We don't count our current root here */ - if (unode->val == root_to_skip) - continue; - qg = find_qgroup_rb(fs_info, unode->val); - if (!qg) - continue; - /* - * We could have a pending removal of this same ref so we may - * not have actually found our ref root when doing - * btrfs_find_all_roots, so we need to keep track of how many - * old roots we find in case we removed ours and added a - * different one at the same time. I don't think this could - * happen in practice but that sort of thinking leads to pain - * and suffering and to the dark side. - */ - (*old_roots)++; - - ulist_reinit(tmp); - ret = ulist_add(qgroups, qg->qgroupid, ptr_to_u64(qg), - GFP_ATOMIC); - if (ret < 0) - return ret; - ret = ulist_add(tmp, qg->qgroupid, ptr_to_u64(qg), GFP_ATOMIC); - if (ret < 0) - return ret; - ULIST_ITER_INIT(&tmp_uiter); - while ((tmp_unode = ulist_next(tmp, &tmp_uiter))) { - struct btrfs_qgroup_list *glist; - int mod; - - qg = u64_to_ptr(tmp_unode->aux); - /* - * We use this sequence number to keep from having to - * run the whole list and 0 out the refcnt every time. - * We basically use sequnce as the known 0 count and - * then add 1 everytime we see a qgroup. This is how we - * get how many of the roots actually point up to the - * upper level qgroups in order to determine exclusive - * counts. - * - * For rescan none of the extent is recorded before so - * we just don't add old_refcnt. - */ - if (rescan) - mod = 0; - else - mod = 1; - btrfs_qgroup_update_old_refcnt(qg, seq, mod); - btrfs_qgroup_update_new_refcnt(qg, seq, 1); - list_for_each_entry(glist, &qg->groups, next_group) { - ret = ulist_add(qgroups, glist->group->qgroupid, - ptr_to_u64(glist->group), - GFP_ATOMIC); - if (ret < 0) - return ret; - ret = ulist_add(tmp, glist->group->qgroupid, - ptr_to_u64(glist->group), - GFP_ATOMIC); - if (ret < 0) - return ret; - } - } - } - return 0; -} - -/* - * We need to walk forward in our operation tree and account for any roots that - * were deleted after we made this operation. - */ -static int qgroup_account_deleted_refs(struct btrfs_fs_info *fs_info, - struct btrfs_qgroup_operation *oper, - struct ulist *tmp, - struct ulist *qgroups, u64 seq, - int *old_roots) -{ - struct ulist_node *unode; - struct ulist_iterator uiter; - struct btrfs_qgroup *qg; - struct btrfs_qgroup_operation *tmp_oper; - struct rb_node *n; - int ret; - - ulist_reinit(tmp); - - /* - * We only walk forward in the tree since we're only interested in - * removals that happened _after_ our operation. - */ - spin_lock(&fs_info->qgroup_op_lock); - n = rb_next(&oper->n); - spin_unlock(&fs_info->qgroup_op_lock); - if (!n) - return 0; - tmp_oper = rb_entry(n, struct btrfs_qgroup_operation, n); - while (tmp_oper->bytenr == oper->bytenr) { - /* - * If it's not a removal we don't care, additions work out - * properly with our refcnt tracking. - */ - if (tmp_oper->type != BTRFS_QGROUP_OPER_SUB_SHARED && - tmp_oper->type != BTRFS_QGROUP_OPER_SUB_EXCL) - goto next; - qg = find_qgroup_rb(fs_info, tmp_oper->ref_root); - if (!qg) - goto next; - ret = ulist_add(qgroups, qg->qgroupid, ptr_to_u64(qg), - GFP_ATOMIC); - if (ret) { - if (ret < 0) - return ret; - /* - * We only want to increase old_roots if this qgroup is - * not already in the list of qgroups. If it is already - * there then that means it must have been re-added or - * the delete will be discarded because we had an - * existing ref that we haven't looked up yet. In this - * case we don't want to increase old_roots. So if ret - * == 1 then we know that this is the first time we've - * seen this qgroup and we can bump the old_roots. - */ - (*old_roots)++; - ret = ulist_add(tmp, qg->qgroupid, ptr_to_u64(qg), - GFP_ATOMIC); - if (ret < 0) - return ret; - } -next: - spin_lock(&fs_info->qgroup_op_lock); - n = rb_next(&tmp_oper->n); - spin_unlock(&fs_info->qgroup_op_lock); - if (!n) - break; - tmp_oper = rb_entry(n, struct btrfs_qgroup_operation, n); - } - - /* Ok now process the qgroups we found */ - ULIST_ITER_INIT(&uiter); - while ((unode = ulist_next(tmp, &uiter))) { - struct btrfs_qgroup_list *glist; - - qg = u64_to_ptr(unode->aux); - btrfs_qgroup_update_old_refcnt(qg, seq, 1); - btrfs_qgroup_update_new_refcnt(qg, seq, 1); - list_for_each_entry(glist, &qg->groups, next_group) { - ret = ulist_add(qgroups, glist->group->qgroupid, - ptr_to_u64(glist->group), GFP_ATOMIC); - if (ret < 0) - return ret; - ret = ulist_add(tmp, glist->group->qgroupid, - ptr_to_u64(glist->group), GFP_ATOMIC); - if (ret < 0) - return ret; - } - } - return 0; -} - -/* Add refcnt for the newly added reference. */ -static int qgroup_calc_new_refcnt(struct btrfs_fs_info *fs_info, - struct btrfs_qgroup_operation *oper, - struct btrfs_qgroup *qgroup, - struct ulist *tmp, struct ulist *qgroups, - u64 seq) -{ - struct ulist_node *unode; - struct ulist_iterator uiter; - struct btrfs_qgroup *qg; - int ret; - - ulist_reinit(tmp); - ret = ulist_add(qgroups, qgroup->qgroupid, ptr_to_u64(qgroup), - GFP_ATOMIC); - if (ret < 0) - return ret; - ret = ulist_add(tmp, qgroup->qgroupid, ptr_to_u64(qgroup), - GFP_ATOMIC); - if (ret < 0) - return ret; - ULIST_ITER_INIT(&uiter); - while ((unode = ulist_next(tmp, &uiter))) { - struct btrfs_qgroup_list *glist; - - qg = u64_to_ptr(unode->aux); - if (oper->type == BTRFS_QGROUP_OPER_ADD_SHARED) - btrfs_qgroup_update_new_refcnt(qg, seq, 1); - else - btrfs_qgroup_update_old_refcnt(qg, seq, 1); - list_for_each_entry(glist, &qg->groups, next_group) { - ret = ulist_add(tmp, glist->group->qgroupid, - ptr_to_u64(glist->group), GFP_ATOMIC); - if (ret < 0) - return ret; - ret = ulist_add(qgroups, glist->group->qgroupid, - ptr_to_u64(glist->group), GFP_ATOMIC); - if (ret < 0) - return ret; - } - } - return 0; -} - /* * This adjusts the counters for all referenced qgroups if need be. */ @@ -1858,39 +1642,6 @@ static int qgroup_adjust_counters(struct btrfs_fs_info *fs_info, } /* - * If we removed a data extent and there were other references for that bytenr - * then we need to lookup all referenced roots to make sure we still don't - * reference this bytenr. If we do then we can just discard this operation. - */ -static int check_existing_refs(struct btrfs_trans_handle *trans, - struct btrfs_fs_info *fs_info, - struct btrfs_qgroup_operation *oper) -{ - struct ulist *roots = NULL; - struct ulist_node *unode; - struct ulist_iterator uiter; - int ret = 0; - - ret = btrfs_find_all_roots(trans, fs_info, NULL, oper->bytenr, - oper->elem.seq, &roots, 0); - if (ret < 0) - return ret; - ret = 0; - - ULIST_ITER_INIT(&uiter); - while ((unode = ulist_next(roots, &uiter))) { - if (unode->val == oper->ref_root) { - ret = 1; - break; - } - } - ulist_free(roots); - btrfs_put_tree_mod_seq(fs_info, &oper->elem); - - return ret; -} - -/* * If we share a reference across multiple roots then we may need to adjust * various qgroups referenced and exclusive counters. The basic premise is this * -- 2.3.3 -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
