Hi!
>From the messages I see in this forum, I got the impression that it is a
developer forum and not a help forum. I seek help. So, please point me
to the right place if I shouldn't ask my questions here.
Since I am new, first my data:
linux-va3e:~ # uname -a
Linux linux-va3e.site 3.16.7-29-desktop #1 SMP PREEMPT Fri Oct 23
00:46:04 UTC 2015 (6be6a97) x86_64 x86_64 x86_64 GNU/Linux
linux-va3e:~ # btrfs --version
btrfs-progs v4.0+20150429
linux-va3e:~ # btrfs fi show
Label: none uuid: 656dc65f-240b-4137-a490-0175717dd7fa
Total devices 1 FS bytes used 13.49GiB
devid 1 size 20.00GiB used 16.19GiB path /dev/sda2
btrfs-progs v4.0+20150429
linux-va3e:~ # btrfs fi df /
Data, single: total=12.62GiB, used=12.14GiB
System, DUP: total=32.00MiB, used=16.00KiB
Metadata, DUP: total=1.75GiB, used=1.35GiB
GlobalReserve, single: total=304.00MiB, used=0.00B
dmesg > dmesg.log is attached.
When I installed openSuse 13.2 on my computer, I used the default:
- btrfs is used for a root partition of 20GB
- A program called "snapper" creates snapshots of the system whenever a
change is done (i.e., whenever a new program is installed or an old
program is upgraded).
After a while, the root partition was full because of btrfs's metadata.
In an openSuse forum, people told me I should regularly delete the
snapshots, and should "btrfs balance" and "btrf fi defragment" in order
to keep the metadata under control.
It was effective in the sense that I could use my computer again. It is
annoying that the user has to manually delete snapshots and has to
remember to regularly do balancing, though.
Now to my current problem: It seems that my root partition gradually
fills up. So, I am afraid that in a few weeks my computer will be broken
again. And that happens although I keep deleting old snapshots and try
balancing.
My questions:
1. There is one old snapshot that I can not delete:
# snapper -c root delete 318
Fehler beim Löschen des Schnappschusses.
The error message does not hint *why* the snapshot can not be deleted.
Here is one observation that may indicate what goes wrong:
# find / -name 318
/.snapshots/318
find: File system loop detected; ‘/.snapshots/318/snapshot’ is part of
the same file system loop as ‘/’.
So, what can I do to delete the snapshot to hopefully free some memory?
2. When I simply do "btrfs balance start /", then it says the device is
full. So, I tried
linux-va3e:~ # btrfs balance start -mlimit=1 -dlimit=2 -dusage=10 /
Done, had to relocate 2 out of 28 chunks
Fine. But when I try it again, it still says that it had to relocate 2
out of 28 chunks! Shouldn't it be the case that the work has already
been done, so that no further relocation is needed with the same parameters?
3. When I increase the parameters, I always come to the point that there
is no space left on device. So, how can I achieve full balance of the
system?
One last remark: On the openSuse forum, I was advised to re-install the
system, and either reserve at least 50GB for the root partition, or drop
btrfs and use ext4 for the root partition. I would like to avoid such
trouble and hope that you can tell me how to sanitise my root partition,
and *keep* it sane.
Best regards,
Simon
[ 0.000000] CPU0 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.16.7-29-desktop (geeko@buildhost) (gcc version 4.8.3 20140627 [gcc-4_8-branch revision 212064] (SUSE Linux) ) #1 SMP PREEMPT Fri Oct 23 00:46:04 UTC 2015 (6be6a97)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-29-desktop root=UUID=656dc65f-240b-4137-a490-0175717dd7fa resume=/dev/disk/by-uuid/4d8e38d7-cfb9-4101-965e-1a66d96bd37d splash=silent quiet showopts
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bfd6afff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd6b000-0x00000000bfdbefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfdbf000-0x00000000bfe82fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfe83000-0x00000000bfebefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfebf000-0x00000000bfedefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfedf000-0x00000000bfef5fff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfef6000-0x00000000bfefdfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfefe000-0x00000000bfefefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfeff000-0x00000000bfefffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bff00000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fff00000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Hewlett-Packard HP Pavilion dv7 Notebook PC/30F4, BIOS F.23 12/04/2008
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0FFF00000 mask FFFF00000 write-protect
[ 0.000000] 3 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 4 base 100000000 mask FC0000000 write-back
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbff00 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x0220b000, 0x0220bfff] PGTABLE
[ 0.000000] BRK [0x0220c000, 0x0220cfff] PGTABLE
[ 0.000000] BRK [0x0220d000, 0x0220dfff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13fe00000-0x13fffffff]
[ 0.000000] [mem 0x13fe00000-0x13fffffff] page 2M
[ 0.000000] BRK [0x0220e000, 0x0220efff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x13c000000-0x13fdfffff]
[ 0.000000] [mem 0x13c000000-0x13fdfffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13bffffff]
[ 0.000000] [mem 0x100000000-0x13bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xbfd6afff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0xbfbfffff] page 2M
[ 0.000000] [mem 0xbfc00000-0xbfd6afff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfdbf000-0xbfe82fff]
[ 0.000000] [mem 0xbfdbf000-0xbfe82fff] page 4k
[ 0.000000] BRK [0x0220f000, 0x0220ffff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xbfebf000-0xbfedefff]
[ 0.000000] [mem 0xbfebf000-0xbfedefff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfef6000-0xbfefdfff]
[ 0.000000] [mem 0xbfef6000-0xbfefdfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xbfeff000-0xbfefffff]
[ 0.000000] [mem 0xbfeff000-0xbfefffff] page 4k
[ 0.000000] RAMDISK: [mem 0x36716000-0x37382fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 HP )
[ 0.000000] ACPI: XSDT 0x00000000BFEFE120 000074 (v01 HPQOEM SLIC-MPC 00000001 01000013)
[ 0.000000] ACPI: FACP 0x00000000BFEF3000 0000F4 (v04 HP VADER 00000001 MSFT 01000013)
[ 0.000000] ACPI: DSDT 0x00000000BFEE4000 00A652 (v01 HP VADER 00000001 MSFT 01000013)
[ 0.000000] ACPI: FACS 0x00000000BFE8C000 000040
[ 0.000000] ACPI: DMAR 0x00000000BFEF5000 000098 (v01 ? 00000001 00000000)
[ 0.000000] ACPI: SSDT 0x00000000BFEF4000 000655 (v01 PmRef CpuPm 00003000 INTL 20060912)
[ 0.000000] ACPI: HPET 0x00000000BFEF2000 000038 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: APIC 0x00000000BFEF1000 00006C (v02 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: MCFG 0x00000000BFEF0000 00003C (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: ASF! 0x00000000BFEEF000 0000A5 (v32 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SLIC 0x00000000BFEE3000 000176 (v01 HPQOEM SLIC-MPC 00000001 LOHR 000F4240)
[ 0.000000] ACPI: BOOT 0x00000000BFEE2000 000028 (v01 HPQOEM SLIC-MPC 00000001 MSFT 01000013)
[ 0.000000] ACPI: SSDT 0x00000000BFEE1000 000296 (v01 INTEL SataAhci 00001000 INTL 20060912)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13fffffff]
[ 0.000000] NODE_DATA [mem 0x13ffe9000-0x13fffcfff]
[ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013b600000-ffff88013edfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13fffffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xbfd6afff]
[ 0.000000] node 0: [mem 0xbfdbf000-0xbfe82fff]
[ 0.000000] node 0: [mem 0xbfebf000-0xbfedefff]
[ 0.000000] node 0: [mem 0xbfef6000-0xbfefdfff]
[ 0.000000] node 0: [mem 0xbfeff000-0xbfefffff]
[ 0.000000] node 0: [mem 0x100000000-0x13fffffff]
[ 0.000000] On node 0 totalpages: 1048053
[ 0.000000] DMA zone: 56 pages used for memmap
[ 0.000000] DMA zone: 21 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 10691 pages used for memmap
[ 0.000000] DMA32 zone: 781912 pages, LIFO batch:31
[ 0.000000] Normal zone: 3584 pages used for memmap
[ 0.000000] Normal zone: 262144 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfd6b000-0xbfdbefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfe83000-0xbfebefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfedf000-0xbfef5fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbfefe000-0xbfefefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xbff00000-0xbfffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc0000000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfed0ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed10000-0xfed13fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed14000-0xfed17fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed18000-0xfed19fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1a000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xffefffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfff00000-0xffffffff]
[ 0.000000] e820: [mem 0xc0000000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013fc00000 s79104 r8192 d23296 u524288
[ 0.000000] pcpu-alloc: s79104 r8192 d23296 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1033701
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.16.7-29-desktop root=UUID=656dc65f-240b-4137-a490-0175717dd7fa resume=/dev/disk/by-uuid/4d8e38d7-cfb9-4101-965e-1a66d96bd37d splash=silent quiet showopts
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] ------------[ cut here ]------------
[ 0.000000] WARNING: CPU: 0 PID: 0 at ../drivers/iommu/dmar.c:760 warn_invalid_dmar+0x7a/0x8a()
[ 0.000000] Your BIOS is broken; DMAR reported at address 0!
BIOS vendor: Hewlett-Packard; Ver: F.23; Product Version: F.23
[ 0.000000] Modules linked in:
[ 0.000000] CPU: 0 PID: 0 Comm: swapper Not tainted 3.16.7-29-desktop #1
[ 0.000000] Hardware name: Hewlett-Packard HP Pavilion dv7 Notebook PC/30F4, BIOS F.23 12/04/2008
[ 0.000000] ffffffff81006c35 ffffffff8161c923 ffffffff81e03e80 ffffffff8105caf7
[ 0.000000] ffffffff8220a010 ffffffff81e03ed0 0000000000000000 ffffffff81fb52c0
[ 0.000000] ffffffff81e03fb0 ffffffff8105cba4 ffffffff81a95e38 ffffffff00000030
[ 0.000000] Call Trace:
[ 0.000000] [<ffffffff810051ee>] dump_trace+0x8e/0x350
[ 0.000000] [<ffffffff81005556>] show_stack_log_lvl+0xa6/0x190
[ 0.000000] [<ffffffff81006c51>] show_stack+0x21/0x50
[ 0.000000] [<ffffffff8161c923>] dump_stack+0x49/0x6a
[ 0.000000] [<ffffffff8105caf7>] warn_slowpath_common+0x77/0x90
[ 0.000000] [<ffffffff8105cba4>] warn_slowpath_fmt_taint+0x44/0x50
[ 0.000000] [<ffffffff8161dc50>] warn_invalid_dmar+0x7a/0x8a
[ 0.000000] [<ffffffff81f6144a>] detect_intel_iommu+0x79/0x16a
[ 0.000000] [<ffffffff81f17c31>] pci_iommu_alloc+0x46/0x67
[ 0.000000] [<ffffffff81f28be7>] mem_init+0x11/0x99
[ 0.000000] [<ffffffff81f12de9>] start_kernel+0x22e/0x498
[ 0.000000] [<ffffffff81f126fb>] x86_64_start_kernel+0x14d/0x15c
[ 0.000000] ---[ end trace a9058d2246002da8 ]---
[ 0.000000] Memory: 4036732K/4192212K available (6305K kernel code, 1009K rwdata, 4708K rodata, 1560K init, 1532K bss, 155480K reserved)
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=4.
[ 0.000000] Offload RCU callbacks from all CPUs
[ 0.000000] Offload RCU callbacks from CPUs: 0-3.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS:33024 nr_irqs:712 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2127.905 MHz processor
[ 0.001015] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.81 BogoMIPS (lpj=2127905)
[ 0.001019] pid_max: default: 32768 minimum: 301
[ 0.001033] ACPI: Core revision 20140424
[ 0.014918] ACPI: All ACPI Tables successfully acquired
[ 0.015048] Security Framework initialized
[ 0.015067] AppArmor: AppArmor initialized
[ 0.016185] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.018254] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.019283] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019291] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.019669] Initializing cgroup subsys memory
[ 0.019702] Initializing cgroup subsys devices
[ 0.019711] Initializing cgroup subsys freezer
[ 0.019715] Initializing cgroup subsys net_cls
[ 0.019723] Initializing cgroup subsys blkio
[ 0.019729] Initializing cgroup subsys perf_event
[ 0.019732] Initializing cgroup subsys net_prio
[ 0.019741] Initializing cgroup subsys hugetlb
[ 0.019770] CPU: Physical Processor ID: 0
[ 0.019771] CPU: Processor Core ID: 0
[ 0.019774] mce: CPU supports 6 MCE banks
[ 0.019783] CPU0: Thermal monitoring enabled (TM1)
[ 0.019791] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
tlb_flushall_shift: -1
[ 0.019891] Freeing SMP alternatives memory: 24K (ffffffff82084000 - ffffffff8208a000)
[ 0.021183] ftrace: allocating 24414 entries in 96 pages
[ 0.027114] dmar: Host address width 36
[ 0.027118] dmar: DRHD base: 0x00000000000000 flags: 0x1
[ 0.027120] dmar: parse DMAR table failure.
[ 0.027543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.037579] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P7450 @ 2.13GHz (fam: 06, model: 17, stepping: 06)
[ 0.038000] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.038000] ... version: 2
[ 0.038000] ... bit width: 40
[ 0.038000] ... generic registers: 2
[ 0.038000] ... value mask: 000000ffffffffff
[ 0.038000] ... max period: 000000007fffffff
[ 0.038000] ... fixed-purpose events: 3
[ 0.038000] ... event mask: 0000000700000003
[ 0.048143] x86: Booting SMP configuration:
[ 0.048145] .... node #0, CPUs: #1
[ 0.002000] CPU1 microcode updated early to revision 0x60f, date = 2010-09-29
[ 0.061112] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.061125] x86: Booted up 1 node, 2 CPUs
[ 0.061128] smpboot: Total of 2 processors activated (8511.62 BogoMIPS)
[ 0.062144] devtmpfs: initialized
[ 0.069072] PM: Registering ACPI NVS region [mem 0xbfe83000-0xbfebefff] (245760 bytes)
[ 0.070374] pinctrl core: initialized pinctrl subsystem
[ 0.070421] RTC time: 14:37:34, date: 10/31/15
[ 0.070491] NET: Registered protocol family 16
[ 0.070664] cpuidle: using governor ladder
[ 0.070667] cpuidle: using governor menu
[ 0.070724] ACPI: bus type PCI registered
[ 0.070727] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.070828] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.070831] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.070943] PCI: Using configuration type 1 for base access
[ 0.071143] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.071144] mtrr: probably your BIOS does not setup all CPUs.
[ 0.071145] mtrr: corrected configuration.
[ 0.074086] ACPI: Added _OSI(Module Device)
[ 0.074086] ACPI: Added _OSI(Processor Device)
[ 0.074086] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.074086] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.077849] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.079509] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.086374] ACPI: Dynamic OEM Table Load:
[ 0.086382] ACPI: SSDT 0xFFFF8801399F5800 000223 (v01 PmRef Cpu0Ist 00003000 INTL 20060912)
[ 0.087126] ACPI: Dynamic OEM Table Load:
[ 0.087134] ACPI: SSDT 0xFFFF88013F041800 0005B3 (v01 PmRef Cpu0Cst 00003001 INTL 20060912)
[ 0.091438] ACPI: Dynamic OEM Table Load:
[ 0.091446] ACPI: SSDT 0xFFFF8801398D0000 0001CF (v01 PmRef ApIst 00003000 INTL 20060912)
[ 0.094127] ACPI: Dynamic OEM Table Load:
[ 0.094133] ACPI: SSDT 0xFFFF880139A2FE80 00008D (v01 PmRef ApCst 00003000 INTL 20060912)
[ 0.118022] ACPI : EC: GPE storm detected(10 GPEs), transactions will use polling mode
[ 0.118022] ACPI: Interpreter enabled
[ 0.118022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
[ 0.118022] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
[ 0.118043] ACPI: (supports S0 S3 S4 S5)
[ 0.118045] ACPI: Using IOAPIC for interrupt routing
[ 0.118086] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.358219] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.359282] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 0.383018] ACPI: Power Resource [FN00] (off)
[ 0.509613] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.509620] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.509627] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.510704] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
[ 0.510943] PCI host bridge to bus 0000:00
[ 0.510946] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.510949] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.510951] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.510954] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.510956] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[ 0.510965] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.510986] DMAR: Forcing write-buffer flush capability
[ 0.510988] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.511098] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
[ 0.511142] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.511285] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.511355] pci 0000:00:1a.0: reg 0x20: [io 0x80e0-0x80ff]
[ 0.511502] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.511568] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.511642] pci 0000:00:1a.1: reg 0x20: [io 0x80c0-0x80df]
[ 0.511783] pci 0000:00:1a.1: System wakeup disabled by ACPI
[ 0.511856] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.511884] pci 0000:00:1a.7: reg 0x10: [mem 0xdf004c00-0xdf004fff]
[ 0.512012] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.512098] pci 0000:00:1a.7: System wakeup disabled by ACPI
[ 0.512165] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.512188] pci 0000:00:1b.0: reg 0x10: [mem 0xdf000000-0xdf003fff 64bit]
[ 0.512283] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.512401] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.512498] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.512564] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.512624] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.512722] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.512787] pci 0000:00:1c.1: System wakeup disabled by ACPI
[ 0.512847] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
[ 0.512943] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.513014] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.513074] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
[ 0.513174] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.513241] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.513302] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
[ 0.513398] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[ 0.513463] pci 0000:00:1c.4: System wakeup disabled by ACPI
[ 0.513523] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.513630] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.513697] pci 0000:00:1c.5: System wakeup disabled by ACPI
[ 0.513762] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.513833] pci 0000:00:1d.0: reg 0x20: [io 0x80a0-0x80bf]
[ 0.513980] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.514049] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.514123] pci 0000:00:1d.1: reg 0x20: [io 0x8080-0x809f]
[ 0.514264] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.514329] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.514401] pci 0000:00:1d.2: reg 0x20: [io 0x8060-0x807f]
[ 0.514539] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.514604] pci 0000:00:1d.3: [8086:2939] type 00 class 0x0c0300
[ 0.514676] pci 0000:00:1d.3: reg 0x20: [io 0x8040-0x805f]
[ 0.514850] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.514878] pci 0000:00:1d.7: reg 0x10: [mem 0xdf004800-0xdf004bff]
[ 0.515005] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.515089] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.515148] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.515270] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.515331] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
[ 0.515565] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.515593] pci 0000:00:1f.2: reg 0x10: [io 0x8108-0x810f]
[ 0.515604] pci 0000:00:1f.2: reg 0x14: [io 0x8114-0x8117]
[ 0.515615] pci 0000:00:1f.2: reg 0x18: [io 0x8100-0x8107]
[ 0.515626] pci 0000:00:1f.2: reg 0x1c: [io 0x8110-0x8113]
[ 0.515636] pci 0000:00:1f.2: reg 0x20: [io 0x8020-0x803f]
[ 0.515647] pci 0000:00:1f.2: reg 0x24: [mem 0xdf004000-0xdf0047ff]
[ 0.515707] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.515819] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.515839] pci 0000:00:1f.3: reg 0x10: [mem 0xdf005000-0xdf0050ff 64bit]
[ 0.515865] pci 0000:00:1f.3: reg 0x20: [io 0x8000-0x801f]
[ 0.516115] pci 0000:01:00.0: [10de:0649] type 00 class 0x030000
[ 0.516173] pci 0000:01:00.0: reg 0x10: [mem 0xd2000000-0xd2ffffff]
[ 0.516202] pci 0000:01:00.0: reg 0x14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.516237] pci 0000:01:00.0: reg 0x1c: [mem 0xd0000000-0xd1ffffff 64bit]
[ 0.516267] pci 0000:01:00.0: reg 0x24: [io 0x7000-0x707f]
[ 0.516298] pci 0000:01:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
[ 0.518039] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.518043] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.518046] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.518050] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.518233] pci 0000:02:00.0: [8086:4237] type 00 class 0x028000
[ 0.518295] pci 0000:02:00.0: reg 0x10: [mem 0xde000000-0xde001fff 64bit]
[ 0.518515] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[ 0.518568] pci 0000:02:00.0: System wakeup disabled by ACPI
[ 0.520043] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.520048] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.520053] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.520059] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.520144] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.520148] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.520153] pci 0000:00:1c.1: bridge window [mem 0xdd000000-0xddffffff]
[ 0.520160] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 0.520249] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.520254] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.520258] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdcffffff]
[ 0.520265] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[ 0.520437] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.520509] pci 0000:05:00.0: reg 0x10: [io 0x3000-0x30ff]
[ 0.520618] pci 0000:05:00.0: reg 0x18: [mem 0xd6010000-0xd6010fff 64bit pref]
[ 0.520687] pci 0000:05:00.0: reg 0x20: [mem 0xd6000000-0xd600ffff 64bit pref]
[ 0.520731] pci 0000:05:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
[ 0.520996] pci 0000:05:00.0: supports D1 D2
[ 0.520998] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.521096] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.521221] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.521226] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.521230] pci 0000:00:1c.3: bridge window [mem 0xdb000000-0xdbffffff]
[ 0.521238] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref]
[ 0.521389] pci 0000:06:00.0: [197b:2380] type 00 class 0x0c0010
[ 0.521420] pci 0000:06:00.0: reg 0x10: [mem 0xda000000-0xda0007ff]
[ 0.521440] pci 0000:06:00.0: reg 0x14: [mem 0xda000d00-0xda000d7f]
[ 0.521495] pci 0000:06:00.0: reg 0x20: [mem 0xda000c80-0xda000cff]
[ 0.521514] pci 0000:06:00.0: reg 0x24: [mem 0xda000c00-0xda000c7f]
[ 0.521669] pci 0000:06:00.0: System wakeup disabled by ACPI
[ 0.521743] pci 0000:06:00.1: [197b:2382] type 00 class 0x088000
[ 0.521770] pci 0000:06:00.1: reg 0x10: [mem 0xda000b00-0xda000bff]
[ 0.522045] pci 0000:06:00.2: [197b:2381] type 00 class 0x080501
[ 0.522072] pci 0000:06:00.2: reg 0x10: [mem 0xda000a00-0xda000aff]
[ 0.522343] pci 0000:06:00.3: [197b:2383] type 00 class 0x088000
[ 0.522370] pci 0000:06:00.3: reg 0x10: [mem 0xda000900-0xda0009ff]
[ 0.522640] pci 0000:06:00.4: [197b:2384] type 00 class 0x088000
[ 0.522667] pci 0000:06:00.4: reg 0x10: [mem 0xda000800-0xda0008ff]
[ 0.525025] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.525030] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.525034] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xdaffffff]
[ 0.525041] pci 0000:00:1c.4: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref]
[ 0.525127] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[ 0.525132] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
[ 0.525137] pci 0000:00:1c.5: bridge window [mem 0xd9000000-0xd9ffffff]
[ 0.525144] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
[ 0.525243] pci 0000:00:1e.0: PCI bridge to [bus 0a] (subtractive decode)
[ 0.525255] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.525257] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.525259] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.525262] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.525504] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.525618] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 *10 11 12)
[ 0.525731] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.525843] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.525955] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.526070] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.526183] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 9 10 *11 12)
[ 0.526295] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 10 11 12) *0, disabled.
[ 0.534109] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.534179] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.534248] vgaarb: setting as boot device: PCI:0000:01:00.0
[ 0.534248] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.534248] vgaarb: loaded
[ 0.534248] vgaarb: bridge control possible 0000:01:00.0
[ 0.534248] SCSI subsystem initialized
[ 0.534248] libata version 3.00 loaded.
[ 0.534248] ACPI: bus type USB registered
[ 0.534248] usbcore: registered new interface driver usbfs
[ 0.534248] usbcore: registered new interface driver hub
[ 0.534248] usbcore: registered new device driver usb
[ 0.534248] PCI: Using ACPI for IRQ routing
[ 0.536554] PCI: pci_cache_line_size set to 64 bytes
[ 0.536720] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.536722] e820: reserve RAM buffer [mem 0xbfd6b000-0xbfffffff]
[ 0.536724] e820: reserve RAM buffer [mem 0xbfe83000-0xbfffffff]
[ 0.536726] e820: reserve RAM buffer [mem 0xbfedf000-0xbfffffff]
[ 0.536728] e820: reserve RAM buffer [mem 0xbfefe000-0xbfffffff]
[ 0.536730] e820: reserve RAM buffer [mem 0xbff00000-0xbfffffff]
[ 0.536878] NetLabel: Initializing
[ 0.536880] NetLabel: domain hash size = 128
[ 0.536881] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.536900] NetLabel: unlabeled traffic allowed by default
[ 0.536935] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.536940] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.536945] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.539030] Switched to clocksource hpet
[ 0.548475] AppArmor: AppArmor Filesystem Enabled
[ 0.548528] pnp: PnP ACPI init
[ 0.548552] ACPI: bus type PNP registered
[ 0.667311] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000:00:1c.5 BAR 13 [io 0x1000-0x1fff]
[ 0.667414] system 00:00: [io 0x0600-0x060f] has been reserved
[ 0.667417] system 00:00: [io 0x0610] has been reserved
[ 0.667420] system 00:00: [io 0x0800-0x080f] has been reserved
[ 0.667423] system 00:00: [io 0x0810-0x0817] has been reserved
[ 0.667425] system 00:00: [io 0x0820-0x0823] has been reserved
[ 0.667428] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.667431] system 00:00: [io 0x0500-0x053f] has been reserved
[ 0.667434] system 00:00: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.667437] system 00:00: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.667439] system 00:00: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.667442] system 00:00: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.667445] system 00:00: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.667448] system 00:00: [mem 0xfec00000-0xfec00fff] could not be reserved
[ 0.667450] system 00:00: [mem 0xfed20000-0xfed8ffff] has been reserved
[ 0.667453] system 00:00: [mem 0xfee00000-0xfee00fff] has been reserved
[ 0.667457] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.667524] pnp 00:01: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.667634] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.667691] pnp 00:03: Plug and Play ACPI device, IDs SYN0156 SYN0100 SYN0002 PNP0f13 (active)
[ 0.667857] pnp 00:04: Plug and Play ACPI device, IDs ENE0100 (active)
[ 0.667964] pnp: PnP ACPI: found 5 devices
[ 0.667965] ACPI: bus type PNP unregistered
[ 0.675471] pci 0000:01:00.0: can't claim BAR 6 [mem 0xfff80000-0xffffffff pref]: no compatible bridge window
[ 0.675476] pci 0000:05:00.0: can't claim BAR 6 [mem 0xffff0000-0xffffffff pref]: no compatible bridge window
[ 0.675546] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.675549] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.675552] pci 0000:00:01.0: bridge window [io 0x7000-0x7fff]
[ 0.675556] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xd2ffffff]
[ 0.675560] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.675564] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.675568] pci 0000:00:1c.0: bridge window [io 0x6000-0x6fff]
[ 0.675574] pci 0000:00:1c.0: bridge window [mem 0xde000000-0xdeffffff]
[ 0.675578] pci 0000:00:1c.0: bridge window [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.675585] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.675589] pci 0000:00:1c.1: bridge window [io 0x5000-0x5fff]
[ 0.675594] pci 0000:00:1c.1: bridge window [mem 0xdd000000-0xddffffff]
[ 0.675599] pci 0000:00:1c.1: bridge window [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 0.675605] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.675609] pci 0000:00:1c.2: bridge window [io 0x4000-0x4fff]
[ 0.675614] pci 0000:00:1c.2: bridge window [mem 0xdc000000-0xdcffffff]
[ 0.675619] pci 0000:00:1c.2: bridge window [mem 0xd5000000-0xd5ffffff 64bit pref]
[ 0.675628] pci 0000:05:00.0: BAR 6: assigned [mem 0xdb000000-0xdb00ffff pref]
[ 0.675631] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.675634] pci 0000:00:1c.3: bridge window [io 0x3000-0x3fff]
[ 0.675640] pci 0000:00:1c.3: bridge window [mem 0xdb000000-0xdbffffff]
[ 0.675645] pci 0000:00:1c.3: bridge window [mem 0xd6000000-0xd6ffffff 64bit pref]
[ 0.675652] pci 0000:00:1c.4: PCI bridge to [bus 06]
[ 0.675656] pci 0000:00:1c.4: bridge window [io 0x2000-0x2fff]
[ 0.675661] pci 0000:00:1c.4: bridge window [mem 0xda000000-0xdaffffff]
[ 0.675666] pci 0000:00:1c.4: bridge window [mem 0xd7000000-0xd7ffffff 64bit pref]
[ 0.675673] pci 0000:00:1c.5: PCI bridge to [bus 07-09]
[ 0.675676] pci 0000:00:1c.5: bridge window [io 0x1000-0x1fff]
[ 0.675682] pci 0000:00:1c.5: bridge window [mem 0xd9000000-0xd9ffffff]
[ 0.675686] pci 0000:00:1c.5: bridge window [mem 0xd8000000-0xd8ffffff 64bit pref]
[ 0.675693] pci 0000:00:1e.0: PCI bridge to [bus 0a]
[ 0.675707] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.675709] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.675712] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.675714] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.675717] pci_bus 0000:01: resource 0 [io 0x7000-0x7fff]
[ 0.675719] pci_bus 0000:01: resource 1 [mem 0xd0000000-0xd2ffffff]
[ 0.675721] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.675724] pci_bus 0000:02: resource 0 [io 0x6000-0x6fff]
[ 0.675726] pci_bus 0000:02: resource 1 [mem 0xde000000-0xdeffffff]
[ 0.675728] pci_bus 0000:02: resource 2 [mem 0xd3000000-0xd3ffffff 64bit pref]
[ 0.675731] pci_bus 0000:03: resource 0 [io 0x5000-0x5fff]
[ 0.675733] pci_bus 0000:03: resource 1 [mem 0xdd000000-0xddffffff]
[ 0.675735] pci_bus 0000:03: resource 2 [mem 0xd4000000-0xd4ffffff 64bit pref]
[ 0.675737] pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
[ 0.675740] pci_bus 0000:04: resource 1 [mem 0xdc000000-0xdcffffff]
[ 0.675742] pci_bus 0000:04: resource 2 [mem 0xd5000000-0xd5ffffff 64bit pref]
[ 0.675744] pci_bus 0000:05: resource 0 [io 0x3000-0x3fff]
[ 0.675746] pci_bus 0000:05: resource 1 [mem 0xdb000000-0xdbffffff]
[ 0.675749] pci_bus 0000:05: resource 2 [mem 0xd6000000-0xd6ffffff 64bit pref]
[ 0.675751] pci_bus 0000:06: resource 0 [io 0x2000-0x2fff]
[ 0.675753] pci_bus 0000:06: resource 1 [mem 0xda000000-0xdaffffff]
[ 0.675755] pci_bus 0000:06: resource 2 [mem 0xd7000000-0xd7ffffff 64bit pref]
[ 0.675758] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff]
[ 0.675760] pci_bus 0000:07: resource 1 [mem 0xd9000000-0xd9ffffff]
[ 0.675762] pci_bus 0000:07: resource 2 [mem 0xd8000000-0xd8ffffff 64bit pref]
[ 0.675765] pci_bus 0000:0a: resource 4 [io 0x0000-0x0cf7]
[ 0.675767] pci_bus 0000:0a: resource 5 [io 0x0d00-0xffff]
[ 0.675769] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.675771] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[ 0.675821] NET: Registered protocol family 2
[ 0.676099] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.676239] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[ 0.676444] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.676487] TCP: reno registered
[ 0.676496] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.676529] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.676619] NET: Registered protocol family 1
[ 1.777016] pci 0000:00:1a.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.879017] pci 0000:00:1d.7: EHCI: BIOS handoff failed (BIOS bug?) 01010001
[ 2.879384] pci 0000:01:00.0: Video device with shadowed ROM
[ 2.879442] PCI: CLS 64 bytes, default 64
[ 2.879506] Unpacking initramfs...
[ 4.537889] Freeing initrd memory: 12724K (ffff880036716000 - ffff880037383000)
[ 4.537906] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 4.537909] software IO TLB [mem 0xbbd6b000-0xbfd6b000] (64MB) mapped at [ffff8800bbd6b000-ffff8800bfd6afff]
[ 4.537963] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[ 4.537965] Simple Boot Flag at 0x44 set to 0x1
[ 4.538186] microcode: CPU0 sig=0x10676, pf=0x80, revision=0x60f
[ 4.538195] microcode: CPU1 sig=0x10676, pf=0x80, revision=0x60f
[ 4.538296] microcode: Microcode Update Driver: v2.00 <tig...@aivazian.fsnet.co.uk>, Peter Oruba
[ 4.538329] Scanning for low memory corruption every 60 seconds
[ 4.538726] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 4.538781] audit: initializing netlink subsys (disabled)
[ 4.538813] audit: type=2000 audit(1446302257.537:1): initialized
[ 4.539241] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 4.539293] zbud: loaded
[ 4.539505] VFS: Disk quotas dquot_6.5.2
[ 4.539525] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 4.539723] msgmni has been set to 7909
[ 4.539766] Key type big_key registered
[ 4.540105] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 4.540164] io scheduler noop registered
[ 4.540168] io scheduler deadline registered
[ 4.540209] io scheduler cfq registered (default)
[ 4.540608] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 4.540896] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
[ 4.541230] pcieport 0000:00:1c.1: irq 42 for MSI/MSI-X
[ 4.541549] pcieport 0000:00:1c.2: irq 43 for MSI/MSI-X
[ 4.541866] pcieport 0000:00:1c.3: irq 44 for MSI/MSI-X
[ 4.542194] pcieport 0000:00:1c.4: irq 45 for MSI/MSI-X
[ 4.542515] pcieport 0000:00:1c.5: irq 46 for MSI/MSI-X
[ 4.542647] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 4.542669] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 4.542731] vesafb: mode is 640x480x32, linelength=2560, pages=0
[ 4.542733] vesafb: scrolling: redraw
[ 4.542735] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 4.542751] vesafb: framebuffer at 0xd1000000, mapped to 0xffffc90004780000, using 1216k, total 1216k
[ 4.557256] Console: switching to colour frame buffer device 80x30
[ 4.571571] fb0: VESA VGA frame buffer device
[ 4.571594] intel_idle: does not run on family 6 model 23
[ 4.571652] GHES: HEST is not enabled!
[ 4.571713] Serial: 8250/16550 driver, 32 ports, IRQ sharing disabled
[ 4.574026] Non-volatile memory driver v1.3
[ 4.574030] Linux agpgart interface v0.103
[ 4.574277] ahci 0000:00:1f.2: version 3.0
[ 4.574539] ahci 0000:00:1f.2: irq 47 for MSI/MSI-X
[ 4.574584] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[ 4.574622] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
[ 4.574625] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ccc ems
[ 4.580862] scsi0 : ahci
[ 4.581031] scsi1 : ahci
[ 4.581166] scsi2 : ahci
[ 4.581300] scsi3 : ahci
[ 4.581432] scsi4 : ahci
[ 4.581562] scsi5 : ahci
[ 4.581629] ata1: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004100 irq 47
[ 4.581632] ata2: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004180 irq 47
[ 4.581633] ata3: DUMMY
[ 4.581635] ata4: DUMMY
[ 4.581638] ata5: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004300 irq 47
[ 4.581641] ata6: SATA max UDMA/133 abar m2048@0xdf004000 port 0xdf004380 irq 47
[ 4.581677] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 4.581687] ehci-pci: EHCI PCI platform driver
[ 4.581958] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 4.581968] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 4.581984] ehci-pci 0000:00:1a.7: debug port 1
[ 4.585892] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 4.585909] ehci-pci 0000:00:1a.7: irq 18, io mem 0xdf004c00
[ 4.591020] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 4.591131] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.591135] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.591137] usb usb1: Product: EHCI Host Controller
[ 4.591139] usb usb1: Manufacturer: Linux 3.16.7-29-desktop ehci_hcd
[ 4.591141] usb usb1: SerialNumber: 0000:00:1a.7
[ 4.591307] hub 1-0:1.0: USB hub found
[ 4.591325] hub 1-0:1.0: 4 ports detected
[ 4.591780] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 4.591787] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 4.591803] ehci-pci 0000:00:1d.7: debug port 1
[ 4.595719] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 4.595736] ehci-pci 0000:00:1d.7: irq 20, io mem 0xdf004800
[ 4.601020] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 4.601089] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 4.601092] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.601094] usb usb2: Product: EHCI Host Controller
[ 4.601096] usb usb2: Manufacturer: Linux 3.16.7-29-desktop ehci_hcd
[ 4.601098] usb usb2: SerialNumber: 0000:00:1d.7
[ 4.601231] hub 2-0:1.0: USB hub found
[ 4.601241] hub 2-0:1.0: 8 ports detected
[ 4.601487] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 4.601492] uhci_hcd: USB Universal Host Controller Interface driver
[ 4.601735] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 4.601742] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 4.601752] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 4.601786] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000080e0
[ 4.601841] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.601844] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.601846] usb usb3: Product: UHCI Host Controller
[ 4.601848] usb usb3: Manufacturer: Linux 3.16.7-29-desktop uhci_hcd
[ 4.601850] usb usb3: SerialNumber: 0000:00:1a.0
[ 4.601985] hub 3-0:1.0: USB hub found
[ 4.601995] hub 3-0:1.0: 2 ports detected
[ 4.602350] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 4.602357] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 4.602366] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 4.602398] uhci_hcd 0000:00:1a.1: irq 17, io base 0x000080c0
[ 4.602452] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.602455] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.602457] usb usb4: Product: UHCI Host Controller
[ 4.602460] usb usb4: Manufacturer: Linux 3.16.7-29-desktop uhci_hcd
[ 4.602462] usb usb4: SerialNumber: 0000:00:1a.1
[ 4.602592] hub 4-0:1.0: USB hub found
[ 4.602600] hub 4-0:1.0: 2 ports detected
[ 4.602948] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.602955] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
[ 4.602964] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 4.602986] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000080a0
[ 4.603052] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.603055] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.603057] usb usb5: Product: UHCI Host Controller
[ 4.603059] usb usb5: Manufacturer: Linux 3.16.7-29-desktop uhci_hcd
[ 4.603061] usb usb5: SerialNumber: 0000:00:1d.0
[ 4.603191] hub 5-0:1.0: USB hub found
[ 4.603199] hub 5-0:1.0: 2 ports detected
[ 4.603538] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.603545] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
[ 4.603554] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 4.603585] uhci_hcd 0000:00:1d.1: irq 22, io base 0x00008080
[ 4.603642] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.603645] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.603647] usb usb6: Product: UHCI Host Controller
[ 4.603649] usb usb6: Manufacturer: Linux 3.16.7-29-desktop uhci_hcd
[ 4.603651] usb usb6: SerialNumber: 0000:00:1d.1
[ 4.603783] hub 6-0:1.0: USB hub found
[ 4.603792] hub 6-0:1.0: 2 ports detected
[ 4.604148] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.604156] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
[ 4.604164] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 4.604185] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00008060
[ 4.604239] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.604242] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.604244] usb usb7: Product: UHCI Host Controller
[ 4.604247] usb usb7: Manufacturer: Linux 3.16.7-29-desktop uhci_hcd
[ 4.604249] usb usb7: SerialNumber: 0000:00:1d.2
[ 4.604383] hub 7-0:1.0: USB hub found
[ 4.604393] hub 7-0:1.0: 2 ports detected
[ 4.604734] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 4.604741] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 8
[ 4.604750] uhci_hcd 0000:00:1d.3: detected 2 ports
[ 4.604782] uhci_hcd 0000:00:1d.3: irq 19, io base 0x00008040
[ 4.604839] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001
[ 4.604842] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 4.604844] usb usb8: Product: UHCI Host Controller
[ 4.604846] usb usb8: Manufacturer: Linux 3.16.7-29-desktop uhci_hcd
[ 4.604848] usb usb8: SerialNumber: 0000:00:1d.3
[ 4.604980] hub 8-0:1.0: USB hub found
[ 4.604988] hub 8-0:1.0: 2 ports detected
[ 4.605169] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at 0x60,0x64 irq 1,12
[ 4.643883] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 4.643919] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 4.644068] mousedev: PS/2 mouse device common for all mice
[ 4.646840] rtc_cmos 00:01: RTC can wake from S4
[ 4.647013] rtc_cmos 00:01: rtc core: registered rtc_cmos as rtc0
[ 4.647045] rtc_cmos 00:01: alarms up to one month, 242 bytes nvram, hpet irqs
[ 4.647063] ledtrig-cpu: registered to indicate activity on CPUs
[ 4.647089] hidraw: raw HID events driver (C) Jiri Kosina
[ 4.647227] usbcore: registered new interface driver usbhid
[ 4.647229] usbhid: USB HID core driver
[ 4.647296] TCP: cubic registered
[ 4.647336] NET: Registered protocol family 10
[ 4.647918] registered taskstats version 1
[ 4.648023] AppArmor: AppArmor sha1 policy hashing enabled
[ 4.648797] Magic number: 3:421:638
[ 4.648926] rtc_cmos 00:01: setting system clock to 2015-10-31 14:37:38 UTC (1446302258)
[ 4.649050] PM: Checking hibernation image partition /dev/disk/by-uuid/4d8e38d7-cfb9-4101-965e-1a66d96bd37d
[ 4.690202] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 4.903017] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 5.022784] usb 2-1: New USB device found, idVendor=12d1, idProduct=1436
[ 5.022787] usb 2-1: New USB device strings: Mfr=4, Product=3, SerialNumber=0
[ 5.022789] usb 2-1: Product: HUAWEI Mobile
[ 5.022791] usb 2-1: Manufacturer: HUAWEI Technology
[ 5.043027] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 5.044074] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.044214] ata1.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
[ 5.044334] ata1.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[ 5.044337] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.044446] ata1.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
[ 5.044532] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.045392] ata1.00: ATA-8: HGST HTS545050A7E380, GG2OAC90, max UDMA/133
[ 5.045394] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 5.049087] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.049090] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.049183] ata1.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) rejected by device (Stat=0x51 Err=0x04)
[ 5.049438] ata1.00: configured for UDMA/133
[ 5.049568] scsi 0:0:0:0: Direct-Access ATA HGST HTS545050A7 AC90 PQ: 0 ANSI: 5
[ 5.049800] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 5.049803] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 5.049894] sd 0:0:0:0: [sda] Write Protect is off
[ 5.049897] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.049936] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 5.180018] usb 2-5: new high-speed USB device number 4 using ehci-pci
[ 5.311535] usb 2-5: New USB device found, idVendor=064e, idProduct=c107
[ 5.311539] usb 2-5: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 5.311541] usb 2-5: Product: HP Webcam
[ 5.311543] usb 2-5: Manufacturer: SuYin
[ 5.311545] usb 2-5: SerialNumber: CN0314-MM00-MI06-VH-R53.90.01
[ 5.354026] ata2: SATA link down (SStatus 4 SControl 300)
[ 5.384433] sda: sda1 sda2 sda3
[ 5.384855] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.518017] usb 5-2: new low-speed USB device number 2 using uhci_hcd
[ 5.540019] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[ 5.686041] usb 5-2: New USB device found, idVendor=045e, idProduct=00cb
[ 5.686044] usb 5-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 5.686046] usb 5-2: Product: Microsoft Basic Optical Mouse v2.0
[ 5.686048] usb 5-2: Manufacturer: Microsoft
[ 5.714504] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/0003:045E:00CB.0001/input/input3
[ 5.714611] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-0000:00:1d.0-2/input0
[ 5.814029] ata5: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 5.831669] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.832109] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
[ 5.832537] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[ 5.832540] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.832965] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
[ 5.833469] ata5.00: ACPI cmd ef/10:05:00:00:00:a0 (SET FEATURES) succeeded
[ 5.846605] ata5.00: ATAPI: TSSTcorp CDDVDW TS-L633L, 0400, max UDMA/100
[ 5.865178] ata5.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
[ 5.865617] ata5.00: ACPI cmd ef/10:01:00:00:00:a0 (SET FEATURES) succeeded
[ 5.866046] ata5.00: ACPI cmd ef/10:02:00:00:00:a0 (SET FEATURES) succeeded
[ 5.866049] ata5.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 5.866476] ata5.00: ACPI cmd ef/10:04:00:00:00:a0 (SET FEATURES) succeeded
[ 5.881331] ata5.00: configured for UDMA/100
[ 5.883888] scsi 4:0:0:0: CD-ROM TSSTcorp CDDVDW TS-L633L 0400 PQ: 0 ANSI: 5
[ 6.200026] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.478634] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.2, id: 0x1a0b1, caps: 0xd04751/0xa00000/0x20000, board id: 3655, fw id: 509933
[ 6.540064] Switched to clocksource tsc
[ 6.599587] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input2
[ 6.607511] PM: Hibernation image not present or could not be loaded.
[ 6.609075] Freeing unused kernel memory: 1560K (ffffffff81efe000 - ffffffff82084000)
[ 6.609077] Write protecting the kernel read-only data: 14336k
[ 6.614388] Freeing unused kernel memory: 1876K (ffff88000162b000 - ffff880001800000)
[ 6.618271] Freeing unused kernel memory: 1436K (ffff880001c99000 - ffff880001e00000)
[ 6.620665] random: systemd urandom read with 26 bits of entropy available
[ 6.687011] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.687054] scsi 4:0:0:0: Attached scsi generic sg1 type 5
[ 6.698392] systemd-journald[117]: Failed to set file attributes: Inappropriate ioctl for device
[ 6.803162] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
[ 6.803218] ACPI: Power Button [PWRB]
[ 6.803289] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input5
[ 6.803402] ACPI: Lid Switch [LID0]
[ 6.803465] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input6
[ 6.803503] ACPI: Sleep Button [SLPB]
[ 6.803601] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
[ 6.803639] ACPI: Power Button [PWRF]
[ 6.807935] wmi: Mapper loaded
[ 6.811849] ACPI: Video Device [EVGA] (multi-head: yes rom: no post: no)
[ 6.811878] [Firmware Bug]: ACPI: No _BQC method, cannot determine initial brightness
[ 6.824993] [drm] Initialized drm 1.1.0 20060810
[ 6.834201] acpi device:06: registered as cooling_device0
[ 6.834283] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:05/LNXVIDEO:01/input/input8
[ 6.863491] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.863496] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 6.863682] sr 4:0:0:0: Attached scsi CD-ROM sr0
[ 6.887075] firewire_ohci 0000:06:00.0: added OHCI v1.10 device as card 0, 4 IR + 0 IT contexts, quirks 0x10
[ 6.887913] nvidia: module license 'NVIDIA' taints kernel.
[ 6.887917] Disabling lock debugging due to kernel taint
[ 6.904626] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=none
[ 6.905157] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 6.905169] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.93 Wed Aug 19 16:49:15 PDT 2015
[ 6.907397] nvidia_uvm: Loaded the UVM driver, major device number 249
[ 7.193022] raid6: sse2x1 3582 MB/s
[ 7.193084] random: nonblocking pool is initialized
[ 7.210021] raid6: sse2x2 3808 MB/s
[ 7.227026] raid6: sse2x4 6207 MB/s
[ 7.227028] raid6: using algorithm sse2x4 (6207 MB/s)
[ 7.227030] raid6: using ssse3x2 recovery algorithm
[ 7.227258] xor: measuring software checksum speed
[ 7.237003] prefetch64-sse: 8700.000 MB/sec
[ 7.247008] generic_sse: 7716.000 MB/sec
[ 7.247011] xor: using function: prefetch64-sse (8700.000 MB/sec)
[ 7.251651] Btrfs loaded, assert=on
[ 7.257937] BTRFS: device fsid 656dc65f-240b-4137-a490-0175717dd7fa devid 1 transid 704933 /dev/sda2
[ 7.276150] PM: Marking nosave pages: [mem 0x0009e000-0x000fffff]
[ 7.276157] PM: Marking nosave pages: [mem 0xbfd6b000-0xbfdbefff]
[ 7.276161] PM: Marking nosave pages: [mem 0xbfe83000-0xbfebefff]
[ 7.276164] PM: Marking nosave pages: [mem 0xbfedf000-0xbfef5fff]
[ 7.276166] PM: Marking nosave pages: [mem 0xbfefe000-0xbfefefff]
[ 7.276168] PM: Marking nosave pages: [mem 0xbff00000-0xffffffff]
[ 7.276977] PM: Basic memory bitmaps created
[ 7.299718] PM: Basic memory bitmaps freed
[ 7.299725] video LNXVIDEO:01: Restoring backlight state
[ 7.309658] PM: Starting manual resume from disk
[ 7.309664] PM: Hibernation image partition 8:1 present
[ 7.309665] PM: Looking for hibernation image.
[ 7.316565] PM: Image not found (code -22)
[ 7.316568] PM: Hibernation image not present or could not be loaded.
[ 7.388105] firewire_core 0000:06:00.0: created device fw0: GUID 8c3f02007bb540d9, S400
[ 7.458257] BTRFS info (device sda2): disk space caching is enabled
[ 10.233267] device-mapper: uevent: version 1.0.3
[ 10.233330] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-de...@redhat.com
[ 12.380353] BTRFS info (device sda2): disk space caching is enabled
[ 14.035779] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 14.037324] Monitor-Mwait will be used to enter C-1 state
[ 14.037334] Monitor-Mwait will be used to enter C-2 state
[ 14.037338] Monitor-Mwait will be used to enter C-3 state
[ 14.037343] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.037364] ACPI: acpi_idle registered with cpuidle
[ 14.040226] ACPI: Fan [FAN] (off)
[ 14.041141] Switched to clocksource hpet
[ 14.041498] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 14.042655] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042f conflicts with OpRegion 0x0000000000000400-0x000000000000047f (\PMBA) (20140424/utaddress-258)
[ 14.042663] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.042668] ACPI Warning: SystemIO range 0x0000000000000530-0x000000000000053f conflicts with OpRegion 0x0000000000000500-0x000000000000053b (\GPIO) (20140424/utaddress-258)
[ 14.042671] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.042673] ACPI Warning: SystemIO range 0x0000000000000500-0x000000000000052f conflicts with OpRegion 0x0000000000000500-0x000000000000053b (\GPIO) (20140424/utaddress-258)
[ 14.042677] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.042678] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 14.043457] ACPI Warning: SystemIO range 0x0000000000008000-0x000000000000801f conflicts with OpRegion 0x0000000000008000-0x000000000000800f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
[ 14.043463] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.104094] thermal LNXTHERM:00: registered as thermal_zone0
[ 14.104102] ACPI: Thermal Zone [THRM] (62 C)
[ 14.521293] hp_accel: hardware type DV7 found
[ 14.525178] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 14.525187] ACPI: Battery Slot [BAT0] (battery present)
[ 14.525966] lis3lv02d: 8 bits sensor found
[ 14.565860] input: ST LIS3LV02DL Accelerometer as /devices/platform/lis3lv02d/input/input10
[ 14.615979] cfg80211: Calling CRDA to update world regulatory domain
[ 14.646985] iTCO_vendor_support: vendor-support=0
[ 14.647785] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 14.647837] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 14.648266] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.661085] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
[ 14.699901] Linux video capture interface: v2.00
[ 14.798099] ACPI: AC Adapter [AC] (on-line)
[ 15.053655] sdhci: Secure Digital Host Controller Interface driver
[ 15.053658] sdhci: Copyright(c) Pierre Ossman
[ 15.138677] ene_ir: chip is 0x3926 - kbver = 0x00, rev = 0xc0
[ 15.138680] ene_ir: PLL freq = 1406
[ 15.138681] ene_ir: KB3926C detected
[ 15.138695] ene_ir: Firmware regs: c1 01
[ 15.138696] ene_ir: Hardware features:
[ 15.138697] ene_ir: * Uses GPIO 40 for IR demodulated input
[ 15.206498] sdhci-pci 0000:06:00.1: SDHCI controller found [197b:2382] (rev 0)
[ 15.206657] mmc0: no vqmmc regulator found
[ 15.206659] mmc0: no vmmc regulator found
[ 15.206974] mmc0: SDHCI controller on PCI [0000:06:00.1] using DMA
[ 15.206988] sdhci-pci 0000:06:00.2: SDHCI controller found [197b:2381] (rev 0)
[ 15.207087] sdhci-pci 0000:06:00.2: Refusing to bind to secondary interface.
[ 15.383123] cdc_ether 2-1:1.1 wwan0: register 'cdc_ether' at usb-0000:00:1d.7-1, Mobile Broadband Network Device, 02:50:f3:00:00:00
[ 15.383155] usbcore: registered new interface driver cdc_ether
[ 15.453230] usb-storage 2-1:1.0: USB Mass Storage device detected
[ 15.453679] usb-storage 2-1:1.3: USB Mass Storage device detected
[ 15.453807] usb-storage 2-1:1.4: USB Mass Storage device detected
[ 15.453909] usb-storage 2-1:1.5: USB Mass Storage device detected
[ 15.454833] scsi9 : usb-storage 2-1:1.5
[ 15.454932] usb-storage 2-1:1.6: USB Mass Storage device detected
[ 15.455323] scsi10 : usb-storage 2-1:1.6
[ 15.455425] usbcore: registered new interface driver usb-storage
[ 15.465393] Intel(R) Wireless WiFi driver for Linux, in-tree:d
[ 15.465397] Copyright(c) 2003- 2014 Intel Corporation
[ 15.465626] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 15.465764] iwlwifi 0000:02:00.0: irq 48 for MSI/MSI-X
[ 15.517265] input: HP WMI hotkeys as /devices/virtual/input/input12
[ 15.611020] Registered IR keymap rc-rc6-mce
[ 15.611122] input: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0/input11
[ 15.611226] rc0: ENE eHome Infrared Remote Receiver as /devices/virtual/rc/rc0
[ 15.612385] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 15.612399] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 15.612758] r8169 0000:05:00.0: irq 49 for MSI/MSI-X
[ 15.612994] r8169 0000:05:00.0 eth0: RTL8168c/8111c at 0xffffc90004766000, 00:23:5a:1e:4f:36, XID 1c4000c0 IRQ 49
[ 15.612997] r8169 0000:05:00.0 eth0: jumbo features [frames: 6128 bytes, tx checksumming: ko]
[ 15.621156] ene_ir: driver has been successfully loaded
[ 15.659184] usbcore: registered new interface driver uas
[ 15.675511] snd_hda_intel 0000:00:1b.0: irq 50 for MSI/MSI-X
[ 15.721385] iwlwifi 0000:02:00.0: loaded firmware version 8.83.5.1 build 33692 op_mode iwldvm
[ 15.835955] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[ 15.844924] input: HP Webcam as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input13
[ 15.845083] usbcore: registered new interface driver uvcvideo
[ 15.845085] USB Video Class driver (1.1.1)
[ 15.884356] IR RC5(x) protocol handler initialized
[ 15.884595] IR RC6 protocol handler initialized
[ 15.884665] IR Sharp protocol handler initialized
[ 15.884975] IR SANYO protocol handler initialized
[ 15.885025] IR Sony protocol handler initialized
[ 15.893391] IR JVC protocol handler initialized
[ 15.906677] IR NEC protocol handler initialized
[ 15.906777] input: MCE IR Keyboard/Mouse (ene_ir) as /devices/virtual/input/input14
[ 15.906872] IR MCE Keyboard/mouse protocol handler initialized
[ 15.921447] lirc_dev: IR Remote Control driver registered, major 248
[ 15.956833] sound hdaudioC0D0: autoconfig: line_outs=1 (0xd/0x0/0x0/0x0/0x0) type:speaker
[ 15.956838] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 15.956841] sound hdaudioC0D0: hp_outs=1 (0xa/0x0/0x0/0x0/0x0)
[ 15.956843] sound hdaudioC0D0: mono: mono_out=0x0
[ 15.956845] sound hdaudioC0D0: dig-out=0x1e/0x0
[ 15.956847] sound hdaudioC0D0: inputs:
[ 15.956849] sound hdaudioC0D0: Internal Mic=0x18
[ 15.956852] sound hdaudioC0D0: Mic=0xb
[ 15.978067] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0/hdaudioC0D0/input15
[ 15.978486] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input16
[ 15.978578] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input17
[ 15.978709] input: HDA Intel HDMI/DP,pcm=3 Phantom as /devices/pci0000:00/0000:00:1b.0/sound/card0/input18
[ 16.104930] rc rc0: lirc_dev: driver ir-lirc-codec (ene_ir) registered at minor = 0
[ 16.104933] IR LIRC bridge handler initialized
[ 16.225216] usbcore: registered new interface driver usbserial
[ 16.225236] usbcore: registered new interface driver usbserial_generic
[ 16.225251] usbserial: USB Serial support registered for generic
[ 16.270662] cfg80211: World regulatory domain updated:
[ 16.270666] cfg80211: DFS Master region: unset
[ 16.270668] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 16.270671] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.270673] cfg80211: (2457000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.270675] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.270678] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 16.270681] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 16.270683] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 16.270685] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 16.270688] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 16.304239] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 16.304243] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 16.304246] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 16.304248] iwlwifi 0000:02:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
[ 16.304347] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 16.307233] usbcore: registered new interface driver option
[ 16.307252] usbserial: USB Serial support registered for GSM modem (1-port)
[ 16.307341] option 2-1:1.0: GSM modem (1-port) converter detected
[ 16.308446] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB0
[ 16.308531] option 2-1:1.3: GSM modem (1-port) converter detected
[ 16.308637] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB1
[ 16.308691] option 2-1:1.4: GSM modem (1-port) converter detected
[ 16.308797] usb 2-1: GSM modem (1-port) converter now attached to ttyUSB2
[ 16.333911] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[ 16.457306] scsi 9:0:0:0: CD-ROM HUAWEI Mass Storage 2.31 PQ: 0 ANSI: 2
[ 16.458079] scsi 10:0:0:0: Direct-Access HUAWEI SD Storage 2.31 PQ: 0 ANSI: 2
[ 16.459577] sd 10:0:0:0: Attached scsi generic sg2 type 0
[ 16.462549] sr1: scsi-1 drive
[ 16.463443] sr 9:0:0:0: Attached scsi CD-ROM sr1
[ 16.463587] sr 9:0:0:0: Attached scsi generic sg3 type 5
[ 16.465495] sd 10:0:0:0: [sdb] Attached SCSI removable disk
[ 19.064146] Adding 2103292k swap on /dev/sda1. Priority:-1 extents:1 across:2103292k FS
[ 24.003277] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 27.619141] audit: type=1400 audit(1446302281.470:2): apparmor="STATUS" operation="profile_load" name="/{usr/,}bin/ping" pid=824 comm="apparmor_parser"
[ 27.633621] audit: type=1400 audit(1446302281.484:3): apparmor="STATUS" operation="profile_load" name="/sbin/klogd" pid=831 comm="apparmor_parser"
[ 27.643281] audit: type=1400 audit(1446302281.494:4): apparmor="STATUS" operation="profile_load" name="/sbin/syslog-ng" pid=835 comm="apparmor_parser"
[ 27.652458] audit: type=1400 audit(1446302281.503:5): apparmor="STATUS" operation="profile_load" name="/sbin/syslogd" pid=839 comm="apparmor_parser"
[ 27.652967] audit: type=1305 audit(1446302281.503:6): audit_pid=800 old=0 auid=4294967295 ses=4294967295 res=1
[ 29.564945] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.573636] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 29.577582] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 33.072308] r8169 0000:05:00.0 enp5s0: link down
[ 33.072357] IPv6: ADDRCONF(NETDEV_UP): enp5s0: link is not ready
[ 33.076465] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 33.079464] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 33.173187] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
[ 33.176152] iwlwifi 0000:02:00.0: Radio type=0x1-0x2-0x0
[ 33.201448] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[ 34.177199] NET: Registered protocol family 17
[ 37.785656] nvidia 0000:01:00.0: irq 51 for MSI/MSI-X
[ 39.518164] NVRM: Your system is not currently configured to drive a VGA console
[ 39.518169] NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
[ 39.518171] NVRM: requires the use of a text-mode VGA console. Use of other console
[ 39.518173] NVRM: drivers including, but not limited to, vesafb, may result in
[ 39.518174] NVRM: corruption and stability problems, and is not supported.
[ 97.127312] Bluetooth: Core ver 2.19
[ 97.127339] NET: Registered protocol family 31
[ 97.127341] Bluetooth: HCI device and connection manager initialized
[ 97.127351] Bluetooth: HCI socket layer initialized
[ 97.127354] Bluetooth: L2CAP socket layer initialized
[ 97.127366] Bluetooth: SCO socket layer initialized
[ 97.168147] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 97.168152] Bluetooth: BNEP filters: protocol multicast
[ 97.168163] Bluetooth: BNEP socket layer initialized
[ 124.624338] PPP generic driver version 2.4.2
[ 124.719141] PPP BSD Compression module registered
[ 124.727453] PPP Deflate Compression module registered
[ 131.967262] fuse init (API version 7.23)
