On Fri, Jun 10, 2016 at 9:00 PM, Henk Slager <eye...@gmail.com> wrote: > I have seldom seen an fs so full, very regular numbers :) > > But can you provide the output of this script: > https://github.com/knorrie/btrfs-heatmap/blob/master/show_usage.py > > It gives better info w.r.t. devices and it is then easier to say what > has to be done. > > But you have btrfs raid0 data (2 stripes) and raid1 metadata, and they > both want 2 devices currently and there is only one device with place > for your 2G chunks. So in theory you need 2 empty devices added for a > balance to succeed. If you can allow reduces redundancy for some time, > you could shrink the fs used space on hdd1 to half, same for the > partition itself, add a hdd2 parttition and add that to the fs. Or > just add another HDD. > Then your 50Gb of deletions could get into effect if you start > balancing. Also have a look at the balance stripe filters I would say.
So after adding another one [100Gb] disk I've successfully run `btrfs balance` and deleted new disks without any issues. Thanks for your help. //wbr ojab -- To unsubscribe from this list: send the line "unsubscribe linux-btrfs" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html