Update the FSL, GPIO binding documentation to add support for GPIO controller found on Freescale's LS2080A platform.
Signed-off-by: Liu Gang <[email protected]> Signed-off-by: Bhupesh Sharma <[email protected]> --- .../devicetree/bindings/gpio/gpio-mpc8xxx.txt | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt index 805ddcd..f2455c5 100644 --- a/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt +++ b/Documentation/devicetree/bindings/gpio/gpio-mpc8xxx.txt @@ -1,9 +1,9 @@ -* Freescale MPC512x/MPC8xxx GPIO controller +* Freescale MPC512x/MPC8xxx/Layerscape GPIO controller Required properties: - compatible : Should be "fsl,<soc>-gpio" The following <soc>s are known to be supported: - mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq + mpc5121, mpc5125, mpc8349, mpc8572, mpc8610, pq3, qoriq. - reg : Address and length of the register set for the device - interrupts : Should be the port interrupt shared by all 32 pins. - #gpio-cells : Should be two. The first cell is the pin number and -- 1.7.9.5 -- To unsubscribe from this list: send the line "unsubscribe linux-clk" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
