s/dependant of/dependent on/
s/ouput/output/
Signed-off-by: Geert Uytterhoeven <[email protected]>
---
drivers/clk/shmobile/clk-rcar-gen2.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c
b/drivers/clk/shmobile/clk-rcar-gen2.c
index 3f02b40b4911831c..5928d8480db90061 100644
--- a/drivers/clk/shmobile/clk-rcar-gen2.c
+++ b/drivers/clk/shmobile/clk-rcar-gen2.c
@@ -117,7 +117,7 @@ static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned
long rate,
*
* Using experimental measurements, it seems that no more than
* ~10 iterations are needed, independently of the CPU rate.
- * Since this value might be dependant of external xtal rate, pll1
+ * Since this value might be dependent on external xtal rate, pll1
* rate or even the other emulation clocks rate, use 1000 as a
* "super" safe value.
*/
@@ -264,7 +264,7 @@ static struct clk * __init cpg_adsp_clk_register(struct
rcar_gen2_cpg *cpg)
* 1 1 0 30 / 2 x172/2 x208/2 x106
* 1 1 1 30 / 2 x172/2 x208/2 x88
*
- * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2)
+ * *1 : Table 7.6 indicates VCO output (PLLx = VCO/2)
*/
#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \
(((md) & BIT(13)) >> 12) | \
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-clk" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
