Hi Everybody, I'm looking for tests that demonstrate the characteristics of Red Hat Cluster Behaviour. So far, I came up with the following things myself:
normal operation: 1 Reboot node2 2 Reboot node1 3 Halt node2 4 Halt node1 5 Boot node2 6 Boot node1 hardware failures 7 On the node on which the cluster service is started: • Pull out first ethernet cable of the traffic bond • Wait for three minutes • Pull out second Ethernet cable of the traffic bond 8 On the node on which the cluster service is started: • Pull out first ethernet cable of the cluster interconnect bond • Wait for three minutes • Pull out second Ethernet cable of the cluster interconnect bond 9 On the node on which the cluster service is started: • Pull out the SCSI cable 10 On the node on which the cluster service is started: • Pull out the power cords software failures 11 On the node on which the cluster service is started: • Change the cluster service init script so 'status' always returns '1' (failure) I'm interested in what you use your self ... Thanks in advance, Ferry
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
