U have to configure this in /etc/cluster/cluster.conf file. If you are new to RHCS better to use system-config-cluster or conga to configure the Redhat cluster. Thanks, --Santosh
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of m.. mm.. Sent: Monday, February 04, 2008 5:12 PM To: linux clustering Subject: Re: [Linux-cluster] Cluster nodenames, question Patrick Caulfeld kirjoitti 04.02.2008 kello 10:23: > m.. mm.. wrote: > > Hi everyone! > > > > How about this RedHat ClusterSuite 5.1 configuration, if i have example 2 > nodes test1 and test2: > > > > Network is configured like this: > > prodution network > > test1 ip=10.10.10.5 > > test2 ip=10.10.10.6 > > > > Private Heartbeat network > > test1hb ip=192.168.0.2 (machine= test1) > > test2hb ip=192.168.0.3 (-------= test2) > > > > What names should i use when i add cluster member to my cluster "test". > Is'it test1 or sould i use test1hb name? > > > You should tell cluster suite the names of the heartbeat interfaces. > test1hb etc. > > Patrick > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster Hi, But where? ................................................................... Luukku Plus paketilla pääset eroon tila- ja turvallisuusongelmista. Hanki Luukku Plus ja helpotat elämääsi. http://www.mtv3.fi/luukku -- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
