The last post is incorrect. Fence is still hanging at start up.
Here's another log message. Mar 24 19:03:14 csarcsys3-eth0 ccsd[6425]: Error while processing connect: Connection refused Mar 24 19:03:15 csarcsys3-eth0 dlm_controld[6453]: connect to ccs error -111, check ccsd or cluster status From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bennie Thomas Sent: Monday, March 24, 2008 11:22 AM To: linux clustering Subject: Re: [Linux-cluster] 3 node cluster problems try removing the fully qualified hostname from the cluster.conf file. Dalton, Maurice wrote: I have NO fencing equipment I have been task to setup a 3 node cluster Currently I have having problems getting cman(fence) to start Fence will try to start up during cman start up but will fail I tried to run /sbin/fenced -D - I get the following 1206373475 cman_init error 0 111 Here's my cluster.conf file <?xml version="1.0"?> <cluster alias="csarcsys51" config_version="26" name="csarcsys51"> <fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="3"/> <clusternodes> <clusternode name="csarcsys1-eth0.xxx.xxxx.nasa.gov" nodeid="1" votes="1"> <fence/> </clusternode> <clusternode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" nodeid="2" votes="1"> <fence/> </clusternode> <clusternode name="csarcsys3-eth0.xxx.xxxxnasa.gov" nodeid="3" votes="1"> <fence/> </clusternode> </clusternodes> <cman/> <fencedevices/> <rm> <failoverdomains> <failoverdomain name="csarcsys-fo" ordered="1" restricted="0"> <failoverdomainnode name="csarcsys1-eth0.xxx.xxxx.nasa.gov" priority="1"/> <failoverdomainnode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/> <failoverdomainnode name="csarcsys2-eth0.xxx.xxxx.nasa.gov" priority="1"/> </failoverdomain> </failoverdomains> <resources> <ip address="xxx.xxx.xxx.xxx" monitor_link="1"/> <fs device="/dev/sdc1" force_fsck="0" force_unmount="1" fsid="57739" fstype="ext3" mountpo int="/csarc-test" name="csarcsys-fs" options="rw" self_fence="0"/> <nfsexport name="csarcsys-export"/> <nfsclient name="csarcsys-nfs-client" options="no_root_squash,rw" path="/csarc-test" targe t="xxx.xxx.xxx.*"/> </resources> </rm> </cluster> Messages from the logs ar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection. Mar 24 13:24:19 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection. Mar 24 13:24:20 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection. Mar 24 13:24:21 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection. Mar 24 13:24:22 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Cluster is not quorate. Refusing connection. Mar 24 13:24:23 csarcsys2-eth0 ccsd[24888]: Error while processing connect: Connection refused ________________________________ -- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
