Of note, testing with rg_tool yields the correct sequence (or so I'd expect),
yet, I don't see the mysql/asterisk scripts called at all...
[EMAIL PROTECTED]:/etc/cluster# rg_test noop cluster.conf start service asterisk
Running in test mode.
Starting asterisk...
[start] service:asterisk
[start] ip:192.168.111.1
[start] script:drbdcontrol
[start] fs:mysql_disk
[start] script:mysql
[start] script:asterisk
Start of asterisk complete
+++ Memory table dump +++
0xb74d6d10 (32 bytes) allocation trace:
0x804bc04
--- End Memory table dump ---
[EMAIL PROTECTED]:/etc/cluster# rg_test noop cluster.conf stop service asterisk
Running in test mode.
Stopping asterisk...
[stop] script:asterisk
[stop] script:mysql
[stop] fs:mysql_disk
[stop] script:drbdcontrol
[stop] ip:192.168.111.1
[stop] service:asterisk
Stop of asterisk complete
+++ Memory table dump +++
0xb74c5d10 (32 bytes) allocation trace:
0x804bc04
--- End Memory table dump ---
Arjuna Christensen | Systems Engineer
Maximum Internet Ltd
7a Parkhead Pl, Albany, North Shore, 0632 | PO Box 8006, Auckland, 1150, NZ
DDI: + 64 9 913 9683 | Ph: +64 9 915 1825 | Fax:: +64 9 300 7227
[EMAIL PROTECTED]| www.maxnet.co.nz
________________________________
Maxnet | mission critical internet
________________________________
This email (including any attachments) is confidential and intended only for
the person to whom it is addressed.
If you have received this email in error, please notify the sender immediately
and erase all copies of this message
and attachments. The views expressed in this email do not necessarily reflect
those held by Maxnet.
-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Arjuna
Christensen
Sent: Friday, 28 March 2008 1:54 p.m.
To: [email protected]
Subject: [Linux-cluster] RHCS / DRBD / MYSQL
Hiyas,
I'm having some slight issues getting RHCS to work with drbd/asterisk/mysql.
Basically I've got a service configured which (as far as I know) should bring
up an IP address, set itself to the DRBD primary, mount the MySQL DRBD
partition and then proceed to start up mysql/asterisk.
I can see it bringing the IP up, setting itself as the DRBD primary and even
mounting the partition, yet it fails to bring up asterisk/mysql. Could anyone
take a look at my clusterconf - see below.
<?xml version="1.0"?>
<cluster name="asterisk" config_version="23">
<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="5"/>
<cman two_node="1" expected_votes="1"/>
<clusternodes>
<clusternode name="asterisktest01" votes="1" nodeid="1">
<fence>
<method name="single">
<device name="asterisktest01" ipaddr="10.0.0.1"/>
</method>
</fence>
</clusternode>
<clusternode name="asterisktest02" votes="1" nodeid="2">
<fence>
<method name="single">
<device name="asterisktest02" ipaddr="10.0.0.2"/>
</method>
</fence>
</clusternode>
</clusternodes>
<fencedevices>
<fencedevice agent="fence_vi3" name="asterisktest01"
ipaddr="vc01.maxnet.net.nz" login="fence_vmware" passwd="fence123"
vmname="asterisktest01"/>
<fencedevice agent="fence_vi3" name="asterisktest02"
ipaddr="vc01.maxnet.net.nz" login="fence_vmware" passwd="fence123"
vmname="asterisktest02"/>
</fencedevices>
<rm>
<failoverdomains>
<failoverdomain name="asterisk" ordered="0" restricted="1">
<failoverdomainnode name="asterisktest01" priority="1"/>
<failoverdomainnode name="asterisktest02" priority="1"/>
</failoverdomain>
</failoverdomains>
<service name="asterisk" autostart="1" domain="asterisk">
<ip address="192.168.111.1" monitor_link="1">
<script name="drbdcontrol" file="/etc/init.d/drbdcontrol">
<fs name="mysql_disk" device="/dev/drbd0"
mountpoint="/var/lib/mysql">
<script name="mysql" file="/etc/init.d/mysql"/>
<script name="asterisk" file="/etc/init.d/asterisk"/>
</fs>
</script>
</ip>
</service>
</rm>
</cluster>
Any enlightenment would be much appreciated :)
Regards,
Arjuna Christensen | Systems Engineer
Maximum Internet Ltd
7a Parkhead Pl, Albany, North Shore, 0632 | PO Box 8006, Auckland, 1150, NZ
DDI: + 64 9 913 9683 | Ph: +64 9 915 1825 | Fax:: +64 9 300 7227
[EMAIL PROTECTED]| www.maxnet.co.nz
________________________________
Maxnet | mission critical internet
________________________________
This email (including any attachments) is confidential and intended only for
the person to whom it is addressed.
If you have received this email in error, please notify the sender immediately
and erase all copies of this message
and attachments. The views expressed in this email do not necessarily reflect
those held by Maxnet.
--
Linux-cluster mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-cluster
--
Linux-cluster mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-cluster
