Hi, I'm running RedHat 5.2 Beta (Tikanga) and I'm trying to achieve this behavior:
- 2 NICs (eth0, eth1) for one bond0 device intended for public LAN XXX.XXX.XXX.XXX traffic - 2 NICs (eth2, eth3) for one bond1 device intended for inter-cluster LAN YYY.YYY.YYY.YYY traffic - NodeA and NodeB IP addresses are in LAN XXX.XXX.XXX.XXX In cluster.conf: <cman> <multicast addr="239.192.NN.NN"/> </cman> <clusternode name="nodeA"> <multicast addr="239.192.NN.NN" interface="bond1"/> <clusternode/> <clusternode name="nodeB"> <multicast addr="239.192.NN.NN" interface="bond1"/> <clusternode/> Unfortunately all the cluster traffic is bound to bond0: [EMAIL PROTECTED] ip maddr show bond0 ... inet 239.192.NN.NN inet 224.0.0.1 ... [EMAIL PROTECTED] ip maddr show bond1 ... inet 224.0.0.1 ... Is it possible to do it like that (all the clusters have 2 VLAN with bonding each) ? If not, should I put NodeA and NodeB into the LAN YYY.YYY.YYY.YYY in cluster.conf ? Thx for your help !
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
