Ok i think that it works but now i have another problem On the node0 messages i can see the follow message
fence_manual: Node node1 needs to be reset before recovery can procede. Waiting for node1 to rejoin the cluster or for manual acknowledgement that it has been reset (i.e. fence_ack_manual -n node1) so i try to fence_ack_manual -n node1 and i recived this message fence_ack_manual -n node1 Warning: If the node "node1" has not been manually fenced (i.e. power cycled or disconnected from shared storage devices) the GFS file system may become corrupted and all its data unrecoverable! Please verify that the node shown above has been reset or disconnected from storage. Are you certain you want to continue? [yN] y can't open /tmp/fence_manual.fifo: No such file or directory Thank you for your help Best Regards Mauro Casiraghi On Thu, Nov 13, 2008 at 3:58 PM, John Ruemker <[EMAIL PROTECTED]> wrote: > Try adding the nodename attribute to each device as seen here: > > Mauro Casiraghi wrote: > >> I have two cluster nodes with the follow configuration >> For each node i had setup manual fencing >> <?xml version="1.0"?> >> <cluster alias="rhcs" config_version="13" name="mauro"> >> <fence_daemon clean_start="0" post_fail_delay="0" >> post_join_delay="3"/> >> <clusternodes> >> <clusternode name="node0" nodeid="1" votes="1"> >> <fence> >> <method name="1"> >> > <device name="Manual-0" > nodename="node0"/> > >> </method> >> </fence> >> </clusternode> >> <clusternode name="node1" nodeid="2" votes="1"> >> <fence> >> <method name="1"> >> > <device name="Manual-1" > nodename="node1"/> > > </method> >> </fence> >> </clusternode> >> </clusternodes> >> <cman expected_votes="1" two_node="1"/> >> <fencedevices> >> <fencedevice agent="fence_manual" name="Manual-0" /> >> <fencedevice agent="fence_manual" name="Manual-1" /> >> </fencedevices> >> <rm> >> <failoverdomains> >> <failoverdomain name="rhcs-domain" ordered="0" >> restricted="1"> >> <failoverdomainnode name="node0" >> priority="1"/> >> <failoverdomainnode name="node1" >> priority="1"/> >> </failoverdomain> >> </failoverdomains> >> <resources> >> <ip address="xx.xxx.xx.78" monitor_link="1"/> >> </resources> >> <service autostart="1" domain="rhcs-domain" exclusive="0" >> name="rhcs-web" recovery="relocate"> >> <ip ref="xx.xxx.xx..78"/> >> </service> >> </rm> >> </cluster> >> On my messages (node0) i had recived this message >> Nov 13 12:06:34 lxxxxxxx fenced[2002]: fencing node "node1" >> Nov 13 12:06:34 lxxxxxxx fenced[2002]: agent "fence_manual" reports: >> failed: fence_manual no node name >> How can i fix this problem >> >> > > -John > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster >
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
