Hello Arturo, indeed Conga doesn't seem to summarize all the /dev/sd devices to their belonging mpath one. A potential side effect of this being if you have an important number of /dev/sd devices conga will timeout without showing you any result.
I personnaly gave up using conga. About HP-DM, there is a OS's shipped solution (on which relies HP-DM!) called device-mapper-multipath, there's no necessity to use the HP one. Brem 2009/10/8 Arturo Gonzalez Ferrer <[email protected]> > > Hello, > I'm using RHEL 5.4 with an HP MSA2312fc array, and I'm trying to configure a > 3-node cluster sharing a GFS filesystem. I want to do this by using Conga. > All went good, the cluster is up, but when going to the "storage" tab, I saw > 8 devices (sda, sdb...sdh). This is caused of course by having two HBA in > every node (there is another 4th node that is going to access another volume > on the MSA). > So, I went for multipathing: > I've already installed HPDM (hp multipath) in the first node and I can see > now on the command line both volumes that I created (/dev/mapper/mpath0 with > 1TB and /dev/mapper/mpath1 with 600GB), but the problem is that in Conga I > can only see the previous 8 devices... so I'm starting to think that Conga > does not look at multipath devices...or surely I don't know what I'm doing > wrong in order to display them somehow. > Could you give me some direction to follow now? There is no much > documentation about Conga storage management. > Cheers, > Arturo. > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster -- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
