Hi. try add lvm to this volume.
I think that the locking is working on lvs & not on the VGs. After creating the lvs, I think you should see both vgs & lvs. Shalom. On Mon, Mar 8, 2010 at 3:33 PM, Michael <[email protected]> wrote: > Hi, > > thanks for your reply. pvscan finds the new created pv but vgscan can't > find any new volume group on node2. Locking type is set to 3 on both nodes. > When running in debug mode with "clvmd -d" I get this messages > > CLVMD[7b44a820]: Mar 8 15:31:46 add_to_lvmqueue: cmd=0x1b7fe2a0. > client=0x66eb20, msg=0x7fff2b3c709c, len=31, csid=0x7fff2b3c6fe4, xid=0 > CLVMD[42acf940]: Mar 8 15:31:46 process_work_item: remote > CLVMD[42acf940]: Mar 8 15:31:46 process_remote_command LOCK_VG (0x33) for > clientid 0x5000000 XID 164 on node 10.33.231.98 > CLVMD[42acf940]: Mar 8 15:31:46 Dropping metadata for VG #orphans > CLVMD[42acf940]: Mar 8 15:31:46 LVM thread waiting for work > CLVMD[7b44a820]: Mar 8 15:31:46 add_to_lvmqueue: cmd=0x1b7fe2a0. > client=0x66eb20, msg=0x7fff2b3c709c, len=38, csid=0x7fff2b3c6fe4, xid=0 > CLVMD[42acf940]: Mar 8 15:31:46 process_work_item: remote > CLVMD[42acf940]: Mar 8 15:31:46 process_remote_command LOCK_VG (0x33) for > clientid 0x5000000 XID 165 on node 10.33.231.98 > CLVMD[42acf940]: Mar 8 15:31:46 Dropping metadata for VG storage_cluster > CLVMD[42acf940]: Mar 8 15:31:46 LVM thread waiting for work > CLVMD[7b44a820]: Mar 8 15:31:46 add_to_lvmqueue: cmd=0x1b7fe2a0. > client=0x66eb20, msg=0x7fff2b3c709c, len=31, csid=0x7fff2b3c6fe4, xid=0 > CLVMD[42acf940]: Mar 8 15:31:46 process_work_item: remote > CLVMD[42acf940]: Mar 8 15:31:46 process_remote_command LOCK_VG (0x33) for > clientid 0x5000000 XID 166 on node 10.33.231.98 > CLVMD[42acf940]: Mar 8 15:31:46 Dropping metadata for VG #orphans > CLVMD[42acf940]: Mar 8 15:31:46 LVM thread waiting for work > CLVMD[7b44a820]: Mar 8 15:31:46 add_to_lvmqueue: cmd=0x1b7fe2a0. > client=0x66eb20, msg=0x7fff2b3c709c, len=36, csid=0x7fff2b3c6fe4, xid=0 > CLVMD[42acf940]: Mar 8 15:31:46 process_work_item: remote > CLVMD[42acf940]: Mar 8 15:31:46 process_remote_command VG_BACKUP (0x2b) > for clientid 0x5000000 XID 168 on node 10.33.231.98 > CLVMD[42acf940]: Mar 8 15:31:46 Triggering backup of VG metadata for > storage_cluster. suspended=0 > Error backing up metadata, can't find VG for group storage_cluster > CLVMD[42acf940]: Mar 8 15:31:46 LVM thread waiting for work > > Best regards, > > Michael > > > > ----- Ursprüngliche Mail ---- > Von: brem belguebli <[email protected]> > An: linux clustering <[email protected]> > Gesendet: Montag, den 8. März 2010, 13:49:44 Uhr > Betreff: Re: [Linux-cluster] clvmd does not create vgs > > have you tried to pvscan/vgscan on node2 after creation on node1 ? > > > 2010/3/8 Michael <[email protected]>: > > no suggestion? > > > > Thanks > > > > > > > > ----- Ursprüngliche Mail ---- > > Von: Michael <[email protected]> > > An: [email protected] > > Gesendet: Donnerstag, den 4. März 2010, 11:12:51 Uhr > > Betreff: [Linux-cluster] clvmd does not create vgs > > > > Hi, > > > > we are curenty using cman, clvmd and drbd. The problem occurs when we > want to create volume groups. DRBD shows that both nodes are UpToDate. So > first I try create a Physical Volume: > > > > [r...@node1 log]# pvcreate /dev/drbd/by-res/repdata > > Physical volume "/dev/drbd/by-res/repdata" successfully created > > > > [r...@node2 tmp]# pvs > > PV VG Fmt Attr PSize PFree > > /dev/VolGroup00/storage lvm2 -- 1,14T 1,14T > > /dev/sda2 VolGroup00 lvm2 a- 557,62G 0 > > /dev/sdb1 VolGroup00 lvm2 a- 1,09T 0 > > > > Well, /dev/VolGroup00/storage created on both nodes. Fine. Next I want to > create a Volume Group: > > > > [r...@node1 log]# vgcreate storage_cluster /dev/drbd/by-res/repdata > > vgcreate storage_cluster /dev/drbd0 > > Clustered volume group "storage_cluster" successfully created > > > > [r...@node1 log]# vgs > > VG #PV #LV #SN Attr VSize VFree > > VolGroup00 2 3 0 wz--n- 1,63T 0 > > storage_cluster 1 0 0 wz--nc 1,14T 1,14T > > > > > > [r...@node2 tmp]# vgs > > VG #PV #LV #SN Attr VSize VFree > > VolGroup00 2 3 0 wz--n- 1,63T 0 > > > > Hmmm... there is no vg on node2. I restart the whole server but still no > vg visible. What could be wrong? > > > > We're using Centos 5.4 with all patches installed. > > > > cman-2.0.115-1.el5_4.9 > > lvm2-2.02.46-8.el5_4.2 > > lvm2-cluster-2.02.46-8.el5_4.1 > > > > Thanks in advanced and best regards, > > > > Michael > > > > __________________________________________________ > > Do You Yahoo!? > > Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz > gegen Massenmails. > > http://mail.yahoo.com > > > > > > -- > > Linux-cluster mailing list > > [email protected] > > https://www.redhat.com/mailman/listinfo/linux-cluster > > > > > > __________________________________________________ > > Do You Yahoo!? > > Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz > gegen Massenmails. > > http://mail.yahoo.com > > > > > > -- > > Linux-cluster mailing list > > [email protected] > > https://www.redhat.com/mailman/listinfo/linux-cluster > > > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster > > > __________________________________________________ > Do You Yahoo!? > Sie sind Spam leid? Yahoo! Mail verfügt über einen herausragenden Schutz > gegen Massenmails. > http://mail.yahoo.com > > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster >
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
