Please give me the cluster.conf file On Mon, Jun 6, 2011 at 2:53 PM, Manish Kathuria < [email protected]> wrote:
> I am facing a strange problem configuring a two node cluster using > RHCS 4.8. Both nodes are HP Proliant DL 180 G6 servers using HP LO > 100i (IPMI Based). > > When I run the fence_node command to check the fence device > configuration for either of the nodes, it fails giving the following > message in the logs: > > fence_node[nnnn]: Fence of "node1" was unsuccessful > fence_node[nnnn]: Fence of "node2" was unsuccessful > > However, when I run the fence_impilan command using the same > credentials, it executes successfully and is able to switch on, off > and reboot the nodes. The cluster configuration for the fence devices > is: > > IPMI Lan Type > Name: lo1 > IP Address: 172.16.1.x > Login admin > Password passone > Auth Type password > > Name: lo2 > IP Address: 172.16.1.y > Login admin > Password passtwo > Auth Type password > > I have already tried different options for Auth Type (blank, password, > md5). Have also tried using / not using lanplus for both the fence > devices in the Manage Fencing dialog without success. > > Any suggestions ? > > Thanks, > > Manish Kathuria > > -- > Linux-cluster mailing list > [email protected] > https://www.redhat.com/mailman/listinfo/linux-cluster >
-- Linux-cluster mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-cluster
