HI finally it got worked with 3 shares. i manually edited cluster.conf file and added parameters
one more doubt <nfsclient name="nfsClient" options="rw,async,no_root_squash" target="192.168.2.138"/> instead of one ip, how can i add IP range or a complete network.? Regards, Ben On Thu, Sep 13, 2012 at 12:55 PM, Heiko Nardmann < heiko.nardm...@itechnical.de> wrote: > Else you could have googled ... > > And maybe have found > http://permalink.gmane.org/gmane.linux.highavailability.user/14360 ... > which might have been helpful ... > > > Kind regards, > > Heiko > > Am 13.09.2012 11:40, schrieb Ben .T.George: > > HI > > yes these machine have ILOM, but there is no ILOM fencing listed under > LUCI page. > > without fencing i can do testing noe.? > > plese negligent fencing part and give me instructions.because in my > production, we are using cisco UCS and the cisco UCS fencing is listed on > LUCI page > > regards, > Ben > > On Thu, Sep 13, 2012 at 12:28 PM, Heiko Nardmann < > heiko.nardm...@itechnical.de> wrote: > >> Hi! >> >> Those machines should have some ALOM/ILOM/whatever mechanism which you >> could use for power fencing e.g. ... >> >> You should check whether a corresponding fence agent exists then. >> >> >> Kind regards, >> >> Heiko >> >> Am 13.09.2012 10:11, schrieb Ben .T.George: >> >> HI >> >> thanks for your reply..But on this test setup how can i configure >> fencing..i am running 2 Sun X4200 machine.and the freenas is used to create >> Iscsi. >> >> my current NFS setup is working perfectly..and in the production setup >> , i need to implement this on cisco UCS. i saw cisco UCS is there under >> fencing options >> >> please help me add three more nfs shares to my existing configuration.. >> >> >> regards, >> ben >> >> On Thu, Sep 13, 2012 at 9:53 AM, digimer <li...@alteeve.ca> wrote: >> >>> Please add fencing. Without it, the first time a node fails, your >>> cluster will hang (by design). Most servers have IPMI (or similar), so you >>> can probably use fence_ipmilan or one of the brand-specific agents like >>> fence_ilo for HP's iLO. >>> >>> >>> On 09/13/2012 02:44 AM, Ben .T.George wrote: >>> >>>> Hi >>>> >>>> i manually created a cluster.conf file and copied to my 2 nodes..now >>>> it's working fine with one one NFS HA sare.i need to add three more >>>> shares.. >>>> >>>> please check this http://pastebin.com/eM08vrC5 this is my cluster.conf >>>> >>>> how can i add three more shares to this cluster.conf file.? >>>> >>>> please help..i got stacked with project.after testing this setup i need >>>> to implement on production >>>> >>>> >>>> Regards, >>>> Ben >>>> >>>> >>>> >>>> On Wed, Sep 12, 2012 at 10:35 PM, Jan Pokorný <jpoko...@redhat.com >>>> <mailto:jpoko...@redhat.com>> wrote: >>>> >>>> Hello Ben, >>>> >>>> On 12/09/12 16:39 +0300, Ben .T.George wrote: >>>> > i created 2 node cluster with RHEL6 by using redhat cluster >>>> suite. >>>> > >>>> > i joined cluster nodes by using LUCI >>>> > >>>> > i created one IP as resource and source as that IP i created. >>>> > >>>> > i started cluster , but on luci status showing like disabled.but >>>> that IP is >>>> > pining and it is added on node2 >>>> > >>>> > ip addr is showing that ip. >>>> > >>>> > #clustat is showing both nodes online. >>>> >>>> actually thanks for bringing up what showed up to be a real issue >>>> [1]. >>>> Could you please try "service modclusterd start" across the nodes >>>> (and perhaps >>>> making the service persistent with chkconfig) to see if it helps >>>> you? >>>> >>>> In the mean time, this should be a workaround in such cases; >>>> more decent solution for this bug is underway. >>>> >>>> [1] https://bugzilla.redhat.com/show_bug.cgi?id=856785 >>>> >>>> Thanks, >>>> Jan >>>> >>>> -- >>>> Linux-cluster mailing list >>>> Linux-cluster@redhat.com <mailto:Linux-cluster@redhat.com> >>>> >>>> https://www.redhat.com/mailman/listinfo/linux-cluster >>>> >>>> >>>> >>>> >>>> -- >>>> Yours Sincerely >>>> >>>> *#!/usr/bin/env python >>>> #Mysignature.py :)* >>>> >>>> >>>> Signature = " " " Ben.T.George \n >>>> Linux System Administrator \n >>>> Diyar United Company \n >>>> kuwait \n >>>> Phone : +965 - 50629829 <%2B965%20-%2050629829> \n >>>> " "" >>>> >>>> Print Signature >>>> >>>> >> > > > -- Yours Sincerely *#!/usr/bin/env python #Mysignature.py :)* Signature = " " " Ben.T.George \n Linux System Administrator \n Diyar United Company \n kuwait \n Phone : +965 - 50629829 \n " " " Print Signature
-- Linux-cluster mailing list Linux-cluster@redhat.com https://www.redhat.com/mailman/listinfo/linux-cluster
