I've been attempting to follow the recipe laid-out in the Linbit guide "Highly
available iSCSI storage with DRBD and Pacemaker" to create a highly-available
iSCSI server on the two servers san1 & san2 but can't quite get the details
right:
> crm configure property stonith-enabled=false
> crm configure property no-quorum-policy=ignore
>
> crm configure primitive p_IP-1_254 ocf:heartbeat:IPaddr2 params
> ip=192.168.1.254 cidr_netmask=24 op monitor interval=30s
>
> crm configure primitive p_DRBD-r0 ocf:linbit:drbd params drbd_resource=r0 op
> monitor interval=60s
> crm configure ms ms_DRBD-r0 p_DRBD-r0 meta master-max=1 master-node-max=1
> clone-max=2 clone-node-max=1 notify=true
>
> crm configure primitive p_iSCSI-san1 ocf:heartbeat:iSCSITarget params
> iqn=iqn.2012-11.com.example.san1:sda op monitor interval=10s
> crm configure primitive p_iSCSI-san1_0 ocf:heartbeat:iSCSILogicalUnit params
> target_iqn=iqn.2012-11.com.example.san1:sda lun=0 path=/dev/drbd0 op monitor
> interval=10s
> crm configure primitive p_iSCSI-san1_1 ocf:heartbeat:iSCSILogicalUnit params
> target_iqn=iqn.2012-11.com.example.san1:sda lun=1 path=/dev/drbd1 op monitor
> interval=10s
> crm configure primitive p_iSCSI-san1_2 ocf:heartbeat:iSCSILogicalUnit params
> target_iqn=iqn.2012-11.com.example.san1:sda lun=2 path=/dev/drbd2 op monitor
> interval=10s
> crm configure primitive p_iSCSI-san1_3 ocf:heartbeat:iSCSILogicalUnit params
> target_iqn=iqn.2012-11.com.example.san1:sda lun=3 path=/dev/drbd3 op monitor
> interval=10s
> crm configure primitive p_iSCSI-san1_4 ocf:heartbeat:iSCSILogicalUnit params
> target_iqn=iqn.2012-11.com.example.san1:sda lun=4 path=/dev/drbd4 op monitor
> interval=10s
>
> crm configure group g_iSCSI-san1 p_iSCSI-san1 p_iSCSI-san1_0 p_iSCSI-san1_1
> p_iSCSI-san1_2 p_iSCSI-san1_3 p_iSCSI-san1_4 p_IP-1_254
> crm configure order o_DRBD-r0_before_iSCSI-san1 inf: ms_DRBD-r0:promote
> g_iSCSI-san1:start
> crm configure colocation c_iSCSI_with_DRBD-r0 inf: g_iSCSI-san1
> ms_DRBD-r0:Master
> crm configure location l_iSCSI-san1+DRBD-r0 p_IP-1_254 10240: san1
IET (i.e., iscsitarget) is already running (with the default configuration) and
DRBD's already correctly configured to create the resource r0...
> resource r0 {
> volume 0 {
> device /dev/drbd0 ;
> disk /dev/sda7 ;
> meta-disk internal ;
> }
> volume 1 {
> device /dev/drbd1 ;
> disk /dev/sda8 ;
> meta-disk internal ;
> }
> volume 2 {
> device /dev/drbd2 ;
> disk /dev/sda9 ;
> meta-disk internal ;
> }
> volume 3 {
> device /dev/drbd3 ;
> disk /dev/sda10 ;
> meta-disk internal ;
> }
> on san1 {
> address 192.168.1.1:7789 ;
> }
> on san2 {
> address 192.168.1.2:7789 ;
> }
> }
But the shared IP address won't start nor will the LUN's:
> san1:~ # crm_mon -1
> ============
> Last updated: Thu Jan 17 20:55:55 2013
> Last change: Thu Jan 17 20:55:09 2013 by root via cibadmin on san1
> Stack: openais
> Current DC: san1 - partition with quorum
> Version: 1.1.7-77eeb099a504ceda05d648ed161ef8b1582c7daf
> 2 Nodes configured, 2 expected votes
> 9 Resources configured.
> ============
>
> Online: [ san1 san2 ]
>
> Master/Slave Set: ms_DRBD-r0 [p_DRBD-r0]
> Masters: [ san1 ]
> Slaves: [ san2 ]
> Resource Group: g_iSCSI-san1
> p_iSCSI-san1 (ocf::heartbeat:iSCSITarget): Started san1
> p_iSCSI-san1_0 (ocf::heartbeat:iSCSILogicalUnit): Stopped
> p_iSCSI-san1_1 (ocf::heartbeat:iSCSILogicalUnit): Stopped
> p_iSCSI-san1_2 (ocf::heartbeat:iSCSILogicalUnit): Stopped
> p_iSCSI-san1_3 (ocf::heartbeat:iSCSILogicalUnit): Stopped
> p_iSCSI-san1_4 (ocf::heartbeat:iSCSILogicalUnit): Stopped
> p_IP-1_254 (ocf::heartbeat:IPaddr2): Stopped
>
> Failed actions:
> p_iSCSI-san1_0_start_0 (node=san1, call=23, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_1_start_0 (node=san1, call=26, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_2_start_0 (node=san1, call=29, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_3_start_0 (node=san1, call=32, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_4_start_0 (node=san1, call=35, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_0_start_0 (node=san2, call=11, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_1_start_0 (node=san2, call=14, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_2_start_0 (node=san2, call=17, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_3_start_0 (node=san2, call=20, rc=1, status=complete):
> unknown error
> p_iSCSI-san1_4_start_0 (node=san2, call=23, rc=1, status=complete):
> unknown error
What am I doing wrong?
TIA,
Eric Pretorious
Truckee, CA
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
