Hello ,
My issue resolved by removing the --suborg from cluster.conf
Redhat KB https://access.redhat.com/solutions/785903# syntax not worked
with me for RHEL 6.5 i.e for --suborg
IN KB its mentioned as :-- "While invoking |fence_cisco_ucs| agent from
command line, please add |/org-| prefix to the real organization path
like below
|$ fence_cisco_ucs --ip="a.b.c.d" --username="admin" --password="XXXXX"
-z 1 --plug="UCSPROFILE2" --suborg="/org-RHEL/" -o status -v|
with above stntax , Error remain same as follows below :--
[root@mailbox2 ~]# fence_cisco_ucs --ip="172.17.1.30" --username="KVM"
--password="myPassword" -z 1 --plug="mailbox1"
--suborg="/org-root/ls-mailbox" -o status -v
[root@mailbox2 ~]# fence_cisco_ucs --ip="172.17.1.30" --username="KVM"
--password="myPassword" -z 1 --plug="mailbox1" --suborg="/org-root/" -o
status -v
*Failed:* Unable to obtain correct plug status or plug is not available.
Where As if I remove --suborg , then its working properly , as follows.
[root@mailbox2 ~]# fence_cisco_ucs --ip="172.17.1.30" --username="KVM"
--password="myPassword" -z 1 --plug="mailbox1" -o status -v
*Status:* ON
The same logic I used in cluster.conf and now fencing working fine :--)
<fencedevices>
<fencedevice agent="fence_cisco_ucs" ipaddr="172.17.1.30"
ipport="443" login="KVM" name="CiscoFence" passwd="myPassword" ssl="on"/>
</fencedevices>
Thanks
Regards
Jayesh Shinde
On 11/04/2015 02:50 PM, Marek marx Grác wrote:
Hi,
Thanks for a great report. I believe that problem is that in cluster.conf you set up
‘suborg=“/org-root/ls-mailbox” but on the command line you have it without “--"
so it is not used at all. It is best shown at that verbose output.
On 2 November 2015 at 15:39:45, Jayesh Shinde (jayesh.shi...@netcore.co.in)
wrote:
command line fencing :--
-----------------------------
[root@mailbox2 ~]# /usr/sbin/fence_cisco_ucs -a 172.17.1.30 -l KVM -p
'myPassword' -o status -v -z --plug=mailbox1 --ipport=443
suborg="/org-root/ls-mailbox" ; *echo $?*
outCookie="1446038319/bdd0ea5b-386f-4374-8eca-9ff7595c33f3"
outRefreshPeriod="600" outPriv="pn-equipment,pn-maintenance,read-only"
outDomains="" outChannel="noencssl" outEvtChannel="noencssl"
outSessionId="web_29402_B" outVersion="2.2(3d)" outName="KVM">
cookie="1446038319/bdd0ea5b-386f-4374-8eca-9ff7595c33f3"
inHierarchical="false" dn="org-root/ls-mailbox1/power"/>
cookie="1446038319/bdd0ea5b-386f-4374-8eca-9ff7595c33f3" response="yes">
As you can see dn is org-root/ls-mailbox1/... with suborg set it will be
org-root/ls-mailbox/ls-mailbox1/...
It should be enough to remove sub-org part from your cluster.conf
m,
--
Linux-cluster mailing list
Linux-cluster@redhat.com
https://www.redhat.com/mailman/listinfo/linux-cluster
