I don't know much but may be able to get you started. First of all
they are phasing out the cuaX devices, use it's respective tty device.
You should check but I think that it is tty01 or tty1 in your case.
Second /dev/modem is just a symbolic link to /dev/cuaX or /dev/ttyX so
you should use /dev/modem. When you change modems or system
configuration all you will have to change is the link from /dev/modem
to /dev/???? instead of having to change all of your programs device
settings.
Hope I'v been a little help,
Josh
---Steven Hulsberg <[EMAIL PROTECTED]> wrote:
>
> Have been trying to get XiSP to run and all that I have been
> getting is when I goes to configure the modem it just sits there and
says
> modem ini failed.. but the string is only AT and in mini-com thou it
takes
> forever to get the string out it comes back ok. Any ideas? The modem
is on
> COM2 <Cua1> and tried /DEV/MODEM and same for both. ??????
>
>
> Thanks in advance,
>
> <<...>>
>
> -----
>
_________________________________________________________
DO YOU YAHOO!?
Get your free @yahoo.com address at http://mail.yahoo.com
