On Thu, 22 Apr 1999, Kevin K. Sochacki wrote: > Do you have 'isapnp' configured to initialize the card. Hi, Below are the relevant files. --/etc/isapnp.conf-- (CONFIGURE YMH0020/-1 (LD 0 # Instead of (IO 0 (BASE 0x0220)), disable SB: (IO 0 (BASE 0x0220)) (IO 1 (BASE 0x0530)) (IO 2 (BASE 0x0388)) (IO 3 (BASE 0x0330)) (IO 4 (BASE 0x0370)) (INT 0 (IRQ 5 (MODE +E))) (DMA 0 (CHANNEL 0)) (DMA 1 (CHANNEL 1)) -snip-- --etc/conf.modules- # Sound alias sound opl3sa2 alias midi opl3 options opl3 io=0x388 options opl3sa2 io=0x370 mss_io=0x530 irq=5 dma=0 dma2=1 mpu_io=0x330 -snip- --isapnpdump-- # $Id: pnpdump.c,v 1.15a 1998/05/25 17:22:16 fox Exp $ # This is free software, see the sources for details. # This software has NO WARRANTY, use at your OWN RISK # # For details of this file format, see isapnp.conf(5) # # For latest information on isapnp and pnpdump see: # http://www.roestock.demon.co.uk/isapnptools/ # # Compiler flags: -DREALTIME -DNEEDSETSCHEDULER # # Trying port address 0203 # Board 1 has serial identifier 81 ff ff ff ff 20 00 a8 65 # (DEBUG) (READPORT 0x0203) (ISOLATE PRESERVE) (IDENTIFY *) # Card 1: (serial identifier 81 ff ff ff ff 20 00 a8 65) # Vendor Id YMH0020, No Serial Number (-1), checksum 0x81. # Version 1.0, Vendor version 0.0 # ANSI string -->OPL3-SA3 Sound Board<-- # # Logical device id YMH0021 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE YMH0020/-1 (LD 0 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0220 # IO base alignment 16 bytes # Number of IO addresses required: 16 # (IO 0 (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0530 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 1 (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 4 bytes # Number of IO addresses required: 4 # (IO 2 (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0330 # Maximum IO base address 0x0330 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 3 (BASE 0x0330)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0370 # Maximum IO base address 0x0370 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 4 (BASE 0x0370)) # IRQ 5. # High true, edge sensitive interrupt # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 0 (CHANNEL 0)) # Next DMA channel 1. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 1 (CHANNEL 1)) # Start dependent functions: priority acceptable # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0240 # Maximum IO base address 0x0240 # IO base alignment 16 bytes # Number of IO addresses required: 16 # (IO 0 (BASE 0x0240)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0e80 # Maximum IO base address 0x0e80 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 1 (BASE 0x0e80)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x0388 # IO base alignment 8 bytes # Number of IO addresses required: 4 # (IO 2 (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0300 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 3 (BASE 0x0300)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 4 (BASE 0x0100)) # IRQ 5, 7, 9, 10 or 11. # High true, edge sensitive interrupt # (INT 0 (IRQ 5 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 1 (CHANNEL 0)) # Start dependent functions: priority functional # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0220 # Maximum IO base address 0x0280 # IO base alignment 16 bytes # Number of IO addresses required: 16 # (IO 0 (BASE 0x0220)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0530 # Maximum IO base address 0x0f48 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 1 (BASE 0x0530)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0388 # Maximum IO base address 0x03f8 # IO base alignment 8 bytes # Number of IO addresses required: 4 # (IO 2 (BASE 0x0388)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0300 # Maximum IO base address 0x0334 # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 3 (BASE 0x0300)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x0ffe # IO base alignment 2 bytes # Number of IO addresses required: 2 # (IO 4 (BASE 0x0100)) # IRQ 3, 5, 7, 9, 10 or 11. # High true, edge sensitive interrupt # (INT 0 (IRQ 3 (MODE +E))) # First DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 0 (CHANNEL 0)) # Next DMA channel 0, 1 or 3. # 8 bit DMA only # Logical device is not a bus master # DMA may execute in count by byte mode # DMA may not execute in count by word mode # DMA channel speed type F # (DMA 1 (CHANNEL 0)) # End dependent functions # (ACT Y) )) # # Logical device id YMH0022 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE YMH0020/-1 (LD 1 # Compatible device id PNPb02f # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0201 # Maximum IO base address 0x0201 # IO base alignment 1 bytes # Number of IO addresses required: 1 # (IO 0 (BASE 0x0201)) # Start dependent functions: priority functional # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0201 # Maximum IO base address 0x0211 # IO base alignment 16 bytes # Number of IO addresses required: 1 # (IO 0 (BASE 0x0201)) # End dependent functions # (ACT Y) )) # # Logical device id YMH002f # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE YMH0020/-1 (LD 2 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x0ff8 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 0 (BASE 0x0100)) # End dependent functions # (ACT Y) )) # # Logical device id YMH0024 # # Edit the entries below to uncomment out the configuration required. # Note that only the first value of any range is given, this may be changed if required # Don't forget to uncomment the activate (ACT Y) when happy (CONFIGURE YMH0020/-1 (LD 3 # Compatible device id PNP0600 # Multiple choice time, choose one only ! # Start dependent functions: priority preferred # IRQ 11. # High true, edge sensitive interrupt # (INT 0 (IRQ 11 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x01e0 # Maximum IO base address 0x01e0 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 0 (BASE 0x01e0)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x03e6 # Maximum IO base address 0x03e6 # IO base alignment 1 bytes # Number of IO addresses required: 1 # (IO 1 (BASE 0x03e6)) # Start dependent functions: priority functional # IRQ 3, 5, 7, 9, 10 or 11. # High true, edge sensitive interrupt # (INT 0 (IRQ 3 (MODE +E))) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0100 # Maximum IO base address 0x01f8 # IO base alignment 8 bytes # Number of IO addresses required: 8 # (IO 0 (BASE 0x0100)) # Logical device decodes 16 bit IO address lines # Minimum IO base address 0x0306 # Maximum IO base address 0x03f6 # IO base alignment 8 bytes # Number of IO addresses required: 1 # (IO 1 (BASE 0x0306)) # End dependent functions # (ACT Y) )) # End tag... Checksum 0x00 (OK) # Returns all cards to the "Wait for Key" state (WAITFORKEY) > > Dr. S.K. Singh wrote: > > > Hi all, > > I have a Yamaha OPL3 SAX ISA sound Card with 719 e chip. The card > > is not responding in RedHat 5.2 Linux. The sndconfig command does not > > recognise the card. Can some one Pl. give me exact alaise command for this > > card. > > > > Thanks > > > > *~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~* > > Dr. S. K. Singh, I/C ARIS Cell, > > CIRG, Makhdoom, Farah, Mathura > > 281122, India. Ph. 91-565-7-63334(R) > > 63246 (Fax), 63325 (O) > > *_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_* > > > > -====---====---====---====---====---====---====---====---====---====---====- > > to unsubscribe email "unsubscribe linux-admin" to [EMAIL PROTECTED] > > See the linux-admin FAQ: http://www.kalug.lug.net/linux-admin-FAQ/ > > -- > (...Later..:) > _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ > _/ _/ Exxon Research & Engineering _/ > _/ _/_/_/ _/_/ _/_/_/ _/ Kevin K. Sochacki _/ > _/ _/ _/ _/ _/ _/ ICSBS CC124 (908) 730-2911 _/ > _/ _/_/_/ _/_/ & _/_/_/ _/ mailto:[EMAIL PROTECTED] _/ > _/ _/ _/ _/ _/ _/ PERSONAL _/ > _/ _/_/_/ _/ _/ _/_/_/ _/ mailto:[EMAIL PROTECTED] _/ > _/ _/ http://mars.superlink.net/kks _/ > _/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/_/ > > > *~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~*~* Dr. S. K. Singh, I/C ARIS Cell, CIRG, Makhdoom, Farah, Mathura 281122, India. Ph. 91-565-7-63334(R) 63246 (Fax), 63325 (O) *_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*_*
