Greetings,
I am attempting to get a new RH6.1 system working on a network
with I think is a somewhat peculure setup. We have two sets
of windows computers, one in 10.0.2.0/24 and one in 10.0.0.0/24.
They are all on the same physical ethernet segment. There is
a firewall at 10.0.0.10 acting as the internet gateway and doing
NAT.
There is nothing routing between the two logical networks. It
appears that the windows machines are content with this setup,
as they access the firewall just fine (apparently they arp for
the address and send it directly).
I am trying to put a linux box into the 10.0.2 network, and
give it internet access via the firewall. If I add a static
route to 10.0.0.0/24 I can ping 10.0.0.10, but I cannot connect
out to machines on the internet. I have 10.0.0.10 set as
the gateway address in linuxconf.
Is there something else I need to set to get this to work?
Thanks
DK
It does not do to leave a live dragon out of your calculations, if you
live near him. -- J. R. R. Tolkein
