Soldering an LED is a goiod idea and it will not drain much current nor
effect the Fan performance.BUt must make sure the power to Fan is driven
by AC or DC..and if DC is it at 12 V or 5 Vand select a
right LED matching this power input..
- durga
Raju Mathur wrote:
> Solder an LED there yourself :-)
>
> Warning: I don't know if this will affect the fan speed.
>
> >>>>> "Ajit" == Ajit Ranade <[EMAIL PROTECTED]> writes:
>
> Ajit> raju-
>
> Ajit> i did check the bios, and it has a setting for turning off
> Ajit> the cpu fan during "suspend" state. but otherwise there was
> Ajit> nothing about sensing whether cpu fan is on or
> Ajit> not. shouldn't oem's put a led or something, or will that
> Ajit> consume too much power, relative to its utility.
>
> Ajit> -ajit.
>
> --------------------------------------------------------------------
> The mailing list archives are available at
> http://lists.linux-india.org/cgi-bin/linux-delhi
--------------------------------------------------------------------
The mailing list archives are available at
http://lists.linux-india.org/cgi-bin/linux-delhi
