> At 10:57 AM 12/18/98 +0000, you wrote:
> >I've just been experimenting with puting a getty dialin on the same
> >modem as diald uses to get out. I think I've probably done something
> >wrong (which I'll see if I can sort) but it has provoked what I reckon
> >must be a diald bug related to locking. The sequence is as follows:
> If I understand the post correctly, the same device is being used
> for a dialin as well as dial out; both daemons are trying to
> lock the device to insure exclusive use of it. Select unique
> devices for diald and getty resp. each will need its dedicated
> modem device.
Just isn't so!
I am happily using mgetty, minicom, and diald (more than one!) on the
same port. However, the original sender did not detail which OS
they were using.
Under Linux, the ports used should be /dev/ttyS* (and NOT /dev/cua*). Under
FreeBSD (so I have heard) /dev/cua* should be used.
I have been using this complex set for sometime now, and all is working well,
and have no problems.
____________________________________________________________________
Get free e-mail and a permanent address at http://www.netaddress.com/?N=1
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
