Hi Guys!
I have a little problem with PPPD... It takes a long time to connect with
ISDN in Linux vs. Windows.. And I have a little piece off log file her:
Line 1: May 6 03:10:45 panda pppd[5399]: pppd 2.3.7 started by root, uid 0
Line 2: May 6 03:10:45 panda pppd[5399]: Using interface ppp0
Line 3: May 6 03:10:45 panda pppd[5399]: Connect: ppp0 <--> /dev/ttyS0
Line 4: May 6 03:10:45 panda pppd[5399]: sent [LCP ConfReq id=0x1
<asyncmap 0x0> <magic 0x8c9ca78d> <pcomp> <accomp>]
Line 5: May 6 03:10:47 panda pppd[5399]: rcvd [LCP ConfReq id=0xd9
<asyncmap 0x0> <auth pap> <magic 0x34192d3e>]
Line 6: May 6 03:10:47 panda pppd[5399]: sent [LCP ConfAck id=0xd9
<asyncmap 0x0> <auth pap> <magic 0x34192d3e>]
Line 7: May 6 03:10:48 panda pppd[5399]: sent [LCP ConfReq id=0x1
<asyncmap 0x0> <magic 0x8c9ca78d> <pcomp> <accomp>]
Line 8: May 6 03:10:48 panda pppd[5399]: rcvd [LCP ConfRej id=0x1 <pcomp>
<accomp>]
Line 9: May 6 03:10:48 panda pppd[5399]: sent [LCP ConfReq id=0x2
<asyncmap 0x0> <magic 0x8c9ca78d>]
Line 10: May 6 03:10:48 panda pppd[5399]: rcvd [LCP ConfAck id=0x2
<asyncmap 0x0> <magic 0x8c9ca78d>]
Line 10: May 6 03:10:48 panda pppd[5399]: sent [LCP EchoReq id=0x0
magic=0x8c9ca78d]
As you see in Line 4 and 6 it sends a package which takes a long time to get
an answer to, so my question is: Is there a way to aviod this ??? Windows
must have found out how to avoid this, because in Windooze I can connect in
less than a second.
Thanks !!
Sincerely,
Nicolai Rasmussen
email: [EMAIL PROTECTED]
icq: 13438955
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
