-----Message d'origine-----
De : Nicolas Blanc <[EMAIL PROTECTED]>
� : [EMAIL PROTECTED] <[EMAIL PROTECTED]>
Date : lundi 30 ao�t 1999 21:35
Objet : very simple but problematic configuration
>heloo all,
>
>it seems that my configuration has a problem because when i run diald (in
>level 8 debug mode ) it tells me that my connect script is not good.
>here is a part of my log:
>
> Aug 30 16:58:02 fire diald[434]: Starting diald version 0.16
> Aug 30 16:58:02 fire kernel: CSLIP: code copyright 1989 Regents of
>the University of California
> Aug 30 16:58:02 fire kernel: SLIP: version
>0.8.4-NET3.019-NEWTTY-MODULAR (dynamic channels, max=256).
> Aug 30 16:58:02 fire kernel: SLIP linefill/keepalive option.
> Aug 30 16:58:02 fire diald[434]: Proxy device established on
>interface sl0
> Aug 30 16:58:02 fire diald[434]: Setting pointopoint route for sl0
> Aug 30 16:58:02 fire diald[434]: Establishing routes for sl0
> Aug 30 16:58:02 fire diald[434]: Changed snoop device to sl0
> Aug 30 16:58:02 fire diald[434]: Diald initial setup completed.
> Aug 30 16:58:09 fire diald[434]: Running connect (pid = 456).
> Aug 30 16:58:09 fire connect: Initializing Modem
> Aug 30 16:58:19 fire connect: Failed to initialize modem
> Aug 30 16:58:19 fire diald[434]: Connect script failed.
> Aug 30 16:58:19 fire diald[434]: Closing modem line.
> Aug 30 16:58:20 fire diald[434]: Delaying 30 seconds before clear
to
>dial.
>
>my old connection with ppp-on-dialup script was working good...
>i use exactly the same connect script as gived by the diald-exemple rpm
>where i have of couse fill the blanks ...
>i give you my diald.conf file too:
>
> mode ppp
> debug 8
> connect /etc/diald/connect
> device /dev/ttyS1 (i also have a link to /dev/modem)
> speed 115200
> modem
> lock
> crtscts
> local 192.168.1.1 (my adress)
> remote 192.168.1.2 (a non used one, as describe in the diald man
>pages)
> dynamic
> defaultroute
> include /usr/lib/diald/standard.filter
>
>Thanks a lot for your attention, and sorry for these basics question, i
have
>read the doc but i can't succeed.
>
>Rq: i have diald 0.16-51 in rpm, ppp 2.3.5-2 and a 2.0.36 kernel
>
>Nico
>
>
-
To unsubscribe from this list: send the line "unsubscribe linux-diald" in
the body of a message to [EMAIL PROTECTED]
