I'm a little delayed getting back to this, but I seem to have encountered a slight problem. Using Masquerading to provide internet access to a win98 computer with icq on it, port 4000 does not work. I turned off demasq in my diald.conf so I could take a look at the port, but it changes from connection to connection. It does always, as far as I can tell, end up in the 61000's. Those are the masq ports, so it should make sense. In my /etc/services, is there a way to single-out icq some other way than just a port number. Or perhaps i can be more specific in defining the port to make is know the port is masqed? Thanks, Jacob Joseph ----- Original Message ----- From: Lourdes A Jones <[EMAIL PROTECTED]> To: 'Jarmo Paavilainen' <[EMAIL PROTECTED]>; 'diald' <[EMAIL PROTECTED]> Sent: Monday, August 30, 1999 4:53 AM Subject: RE: ICQ > Jarmo Paavilainen wrote: > > Im using ICQ on my Win98 clients and Linux redhat 6.0 is doing all dialing > > (diald) and masqurating. > > > > But my ICQ netdetect does not detect connection (I can live with that). > > It's only designed to work with dialup networking connections. > > > And ICQ keep my connection up (must fix that). > > to /etc/services add > icq 4000/udp #Mirabilis ICQ > icq 4000/tcp #Mirabilis ICQ > > to your filter file (usually /etc/diald/phone.filter or > /usr/lib/diald/standard.filter) add > either: > > # to ignore icq traffic altogether > ignore udp udp.dest=udp.icq > ignore udp udp.source=udp.icq > > OR > > # do not dial-in but keep connection up > # if a fast exchange of messages takes place > # note: number must be less than 300 which is > # the ICQ default timing for checking its servers > keepup udp 270 udp.dest=udp.icq > keepup udp 270 udp.source=udp.icq > > HTH, > > Lourdes > > > - > To unsubscribe from this list: send the line "unsubscribe linux-diald" in > the body of a message to [EMAIL PROTECTED] > - To unsubscribe from this list: send the line "unsubscribe linux-diald" in the body of a message to [EMAIL PROTECTED]
