|
Hi
I am having a few problems configuring dialed to dial a different
My setup works fine at the moment using my current setup, but I wish to
move over to a different as the one I am currently using is very slow and
is giving me constant problems. I am running RH 5.2 with diald .066. I change
all the nessescary settings as recommended by the new ISP but it fails to
connect. Both ISP's use PAP, so all I basically changed was the info in
pap-secrets and diald.conf file. and the connect script
Here is the output of my log when it tries to connect.
Oct 6 15:42:21 orion diald[347]: Running pppd (pid =
31674).
Oct 6 15:42:21 orion kernel: PPP: version 2.2.0 (dynamic channel allocation) Oct 6 15:42:21 orion kernel: PPP Dynamic channel allocation code copyright 199$ Oct 6 15:42:21 orion kernel: PPP line discipline registered. Oct 6 15:42:21 orion kernel: registered device ppp0 Oct 6 15:42:21 orion pppd[31674]: pppd 2.3.5 started by root, uid 0 Oct 6 15:42:21 orion pppd[31674]: Using interface ppp0 Oct 6 15:42:21 orion pppd[31674]: Connect: ppp0 <--> /dev/ttyS0 Oct 6 15:42:51 orion pppd[31674]: LCP: timeout sending Config-Requests Oct 6 15:42:51 orion pppd[31674]: Connection terminated. Oct 6 15:42:51 orion pppd[31674]: Receive serial link is not 8-bit clean: Oct 6 15:42:51 orion pppd[31674]: Problem: all had even parity Oct 6 15:42:51 orion pppd[31674]: Hangup (SIGHUP) Any Help would be appricaited. Thanks
Matt
P.S: The Isp i am moving over to is AT&T
(formally IBM Global Network) |
